ipfs-cluster/cluster_config_test.go

189 lines
5.6 KiB
Go
Raw Normal View History

Issue #162: Rework configuration format The following commit reimplements ipfs-cluster configuration under the following premises: * Each component is initialized with a configuration object defined by its module * Each component decides how the JSON representation of its configuration looks like * Each component parses and validates its own configuration * Each component exposes its own defaults * Component configurations are make the sections of a central JSON configuration file (which replaces the current JSON format) * Component configurations implement a common interface (config.ComponentConfig) with a set of common operations * The central configuration file is managed by a config.ConfigManager which: * Registers ComponentConfigs * Assigns the correspondent sections from the JSON file to each component and delegates the parsing * Delegates the JSON generation for each section * Can be notified when the configuration is updated and must be saved to disk The new service.json would then look as follows: ```json { "cluster": { "id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2", "private_key": "<...>", "secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786", "peers": [], "bootstrap": [], "leave_on_shutdown": false, "listen_multiaddress": "/ip4/0.0.0.0/tcp/9096", "state_sync_interval": "1m0s", "ipfs_sync_interval": "2m10s", "replication_factor": -1, "monitor_ping_interval": "15s" }, "consensus": { "raft": { "heartbeat_timeout": "1s", "election_timeout": "1s", "commit_timeout": "50ms", "max_append_entries": 64, "trailing_logs": 10240, "snapshot_interval": "2m0s", "snapshot_threshold": 8192, "leader_lease_timeout": "500ms" } }, "api": { "restapi": { "listen_multiaddress": "/ip4/127.0.0.1/tcp/9094", "read_timeout": "30s", "read_header_timeout": "5s", "write_timeout": "1m0s", "idle_timeout": "2m0s" } }, "ipfs_connector": { "ipfshttp": { "proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095", "node_multiaddress": "/ip4/127.0.0.1/tcp/5001", "connect_swarms_delay": "7s", "proxy_read_timeout": "10m0s", "proxy_read_header_timeout": "5s", "proxy_write_timeout": "10m0s", "proxy_idle_timeout": "1m0s" } }, "monitor": { "monbasic": { "check_interval": "15s" } }, "informer": { "disk": { "metric_ttl": "30s", "metric_type": "freespace" }, "numpin": { "metric_ttl": "10s" } } } ``` This new format aims to be easily extensible per component. As such, it already surfaces quite a few new options which were hardcoded before. Additionally, since Go API have changed, some redundant methods have been removed and small refactoring has happened to take advantage of the new way. License: MIT Signed-off-by: Hector Sanjuan <hector@protocol.ai>
2017-10-11 18:23:03 +00:00
package ipfscluster
import (
"encoding/json"
"testing"
)
var ccfgTestJSON = []byte(`
{
"id": "QmUfSFm12eYCaRdypg48m8RqkXfLW7A2ZeGZb2skeHHDGA",
"peername": "testpeer",
Issue #162: Rework configuration format The following commit reimplements ipfs-cluster configuration under the following premises: * Each component is initialized with a configuration object defined by its module * Each component decides how the JSON representation of its configuration looks like * Each component parses and validates its own configuration * Each component exposes its own defaults * Component configurations are make the sections of a central JSON configuration file (which replaces the current JSON format) * Component configurations implement a common interface (config.ComponentConfig) with a set of common operations * The central configuration file is managed by a config.ConfigManager which: * Registers ComponentConfigs * Assigns the correspondent sections from the JSON file to each component and delegates the parsing * Delegates the JSON generation for each section * Can be notified when the configuration is updated and must be saved to disk The new service.json would then look as follows: ```json { "cluster": { "id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2", "private_key": "<...>", "secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786", "peers": [], "bootstrap": [], "leave_on_shutdown": false, "listen_multiaddress": "/ip4/0.0.0.0/tcp/9096", "state_sync_interval": "1m0s", "ipfs_sync_interval": "2m10s", "replication_factor": -1, "monitor_ping_interval": "15s" }, "consensus": { "raft": { "heartbeat_timeout": "1s", "election_timeout": "1s", "commit_timeout": "50ms", "max_append_entries": 64, "trailing_logs": 10240, "snapshot_interval": "2m0s", "snapshot_threshold": 8192, "leader_lease_timeout": "500ms" } }, "api": { "restapi": { "listen_multiaddress": "/ip4/127.0.0.1/tcp/9094", "read_timeout": "30s", "read_header_timeout": "5s", "write_timeout": "1m0s", "idle_timeout": "2m0s" } }, "ipfs_connector": { "ipfshttp": { "proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095", "node_multiaddress": "/ip4/127.0.0.1/tcp/5001", "connect_swarms_delay": "7s", "proxy_read_timeout": "10m0s", "proxy_read_header_timeout": "5s", "proxy_write_timeout": "10m0s", "proxy_idle_timeout": "1m0s" } }, "monitor": { "monbasic": { "check_interval": "15s" } }, "informer": { "disk": { "metric_ttl": "30s", "metric_type": "freespace" }, "numpin": { "metric_ttl": "10s" } } } ``` This new format aims to be easily extensible per component. As such, it already surfaces quite a few new options which were hardcoded before. Additionally, since Go API have changed, some redundant methods have been removed and small refactoring has happened to take advantage of the new way. License: MIT Signed-off-by: Hector Sanjuan <hector@protocol.ai>
2017-10-11 18:23:03 +00:00
"private_key": "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",
"secret": "2588b80d5cb05374fa142aed6cbb047d1f4ef8ef15e37eba68c65b9d30df67ed",
"leave_on_shutdown": true,
"listen_multiaddress": "/ip4/127.0.0.1/tcp/10000",
"state_sync_interval": "1m0s",
"ipfs_sync_interval": "2m10s",
"replication_factor_min": 5,
"replication_factor_max": 5,
"monitor_ping_interval": "2s",
"disable_repinning": true
Issue #162: Rework configuration format The following commit reimplements ipfs-cluster configuration under the following premises: * Each component is initialized with a configuration object defined by its module * Each component decides how the JSON representation of its configuration looks like * Each component parses and validates its own configuration * Each component exposes its own defaults * Component configurations are make the sections of a central JSON configuration file (which replaces the current JSON format) * Component configurations implement a common interface (config.ComponentConfig) with a set of common operations * The central configuration file is managed by a config.ConfigManager which: * Registers ComponentConfigs * Assigns the correspondent sections from the JSON file to each component and delegates the parsing * Delegates the JSON generation for each section * Can be notified when the configuration is updated and must be saved to disk The new service.json would then look as follows: ```json { "cluster": { "id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2", "private_key": "<...>", "secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786", "peers": [], "bootstrap": [], "leave_on_shutdown": false, "listen_multiaddress": "/ip4/0.0.0.0/tcp/9096", "state_sync_interval": "1m0s", "ipfs_sync_interval": "2m10s", "replication_factor": -1, "monitor_ping_interval": "15s" }, "consensus": { "raft": { "heartbeat_timeout": "1s", "election_timeout": "1s", "commit_timeout": "50ms", "max_append_entries": 64, "trailing_logs": 10240, "snapshot_interval": "2m0s", "snapshot_threshold": 8192, "leader_lease_timeout": "500ms" } }, "api": { "restapi": { "listen_multiaddress": "/ip4/127.0.0.1/tcp/9094", "read_timeout": "30s", "read_header_timeout": "5s", "write_timeout": "1m0s", "idle_timeout": "2m0s" } }, "ipfs_connector": { "ipfshttp": { "proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095", "node_multiaddress": "/ip4/127.0.0.1/tcp/5001", "connect_swarms_delay": "7s", "proxy_read_timeout": "10m0s", "proxy_read_header_timeout": "5s", "proxy_write_timeout": "10m0s", "proxy_idle_timeout": "1m0s" } }, "monitor": { "monbasic": { "check_interval": "15s" } }, "informer": { "disk": { "metric_ttl": "30s", "metric_type": "freespace" }, "numpin": { "metric_ttl": "10s" } } } ``` This new format aims to be easily extensible per component. As such, it already surfaces quite a few new options which were hardcoded before. Additionally, since Go API have changed, some redundant methods have been removed and small refactoring has happened to take advantage of the new way. License: MIT Signed-off-by: Hector Sanjuan <hector@protocol.ai>
2017-10-11 18:23:03 +00:00
}
`)
func TestLoadJSON(t *testing.T) {
cfg := &Config{}
err := cfg.LoadJSON(ccfgTestJSON)
if err != nil {
t.Fatal(err)
}
if cfg.Peername != "testpeer" {
t.Error("expected peername 'testpeer'")
}
if cfg.ReplicationFactorMin != 5 {
t.Error("expected replication factor min == 5")
}
if !cfg.DisableRepinning {
t.Error("expected disable_repinning to be true")
}
Issue #162: Rework configuration format The following commit reimplements ipfs-cluster configuration under the following premises: * Each component is initialized with a configuration object defined by its module * Each component decides how the JSON representation of its configuration looks like * Each component parses and validates its own configuration * Each component exposes its own defaults * Component configurations are make the sections of a central JSON configuration file (which replaces the current JSON format) * Component configurations implement a common interface (config.ComponentConfig) with a set of common operations * The central configuration file is managed by a config.ConfigManager which: * Registers ComponentConfigs * Assigns the correspondent sections from the JSON file to each component and delegates the parsing * Delegates the JSON generation for each section * Can be notified when the configuration is updated and must be saved to disk The new service.json would then look as follows: ```json { "cluster": { "id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2", "private_key": "<...>", "secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786", "peers": [], "bootstrap": [], "leave_on_shutdown": false, "listen_multiaddress": "/ip4/0.0.0.0/tcp/9096", "state_sync_interval": "1m0s", "ipfs_sync_interval": "2m10s", "replication_factor": -1, "monitor_ping_interval": "15s" }, "consensus": { "raft": { "heartbeat_timeout": "1s", "election_timeout": "1s", "commit_timeout": "50ms", "max_append_entries": 64, "trailing_logs": 10240, "snapshot_interval": "2m0s", "snapshot_threshold": 8192, "leader_lease_timeout": "500ms" } }, "api": { "restapi": { "listen_multiaddress": "/ip4/127.0.0.1/tcp/9094", "read_timeout": "30s", "read_header_timeout": "5s", "write_timeout": "1m0s", "idle_timeout": "2m0s" } }, "ipfs_connector": { "ipfshttp": { "proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095", "node_multiaddress": "/ip4/127.0.0.1/tcp/5001", "connect_swarms_delay": "7s", "proxy_read_timeout": "10m0s", "proxy_read_header_timeout": "5s", "proxy_write_timeout": "10m0s", "proxy_idle_timeout": "1m0s" } }, "monitor": { "monbasic": { "check_interval": "15s" } }, "informer": { "disk": { "metric_ttl": "30s", "metric_type": "freespace" }, "numpin": { "metric_ttl": "10s" } } } ``` This new format aims to be easily extensible per component. As such, it already surfaces quite a few new options which were hardcoded before. Additionally, since Go API have changed, some redundant methods have been removed and small refactoring has happened to take advantage of the new way. License: MIT Signed-off-by: Hector Sanjuan <hector@protocol.ai>
2017-10-11 18:23:03 +00:00
j := &configJSON{}
json.Unmarshal(ccfgTestJSON, j)
j.ID = "abc"
tst, _ := json.Marshal(j)
err = cfg.LoadJSON(tst)
if err == nil {
t.Error("expected error decoding ID")
}
j = &configJSON{}
json.Unmarshal(ccfgTestJSON, j)
j.Peername = ""
tst, _ = json.Marshal(j)
err = cfg.LoadJSON(tst)
if cfg.Peername == "" {
t.Error("expected default peername")
Issue #162: Rework configuration format The following commit reimplements ipfs-cluster configuration under the following premises: * Each component is initialized with a configuration object defined by its module * Each component decides how the JSON representation of its configuration looks like * Each component parses and validates its own configuration * Each component exposes its own defaults * Component configurations are make the sections of a central JSON configuration file (which replaces the current JSON format) * Component configurations implement a common interface (config.ComponentConfig) with a set of common operations * The central configuration file is managed by a config.ConfigManager which: * Registers ComponentConfigs * Assigns the correspondent sections from the JSON file to each component and delegates the parsing * Delegates the JSON generation for each section * Can be notified when the configuration is updated and must be saved to disk The new service.json would then look as follows: ```json { "cluster": { "id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2", "private_key": "<...>", "secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786", "peers": [], "bootstrap": [], "leave_on_shutdown": false, "listen_multiaddress": "/ip4/0.0.0.0/tcp/9096", "state_sync_interval": "1m0s", "ipfs_sync_interval": "2m10s", "replication_factor": -1, "monitor_ping_interval": "15s" }, "consensus": { "raft": { "heartbeat_timeout": "1s", "election_timeout": "1s", "commit_timeout": "50ms", "max_append_entries": 64, "trailing_logs": 10240, "snapshot_interval": "2m0s", "snapshot_threshold": 8192, "leader_lease_timeout": "500ms" } }, "api": { "restapi": { "listen_multiaddress": "/ip4/127.0.0.1/tcp/9094", "read_timeout": "30s", "read_header_timeout": "5s", "write_timeout": "1m0s", "idle_timeout": "2m0s" } }, "ipfs_connector": { "ipfshttp": { "proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095", "node_multiaddress": "/ip4/127.0.0.1/tcp/5001", "connect_swarms_delay": "7s", "proxy_read_timeout": "10m0s", "proxy_read_header_timeout": "5s", "proxy_write_timeout": "10m0s", "proxy_idle_timeout": "1m0s" } }, "monitor": { "monbasic": { "check_interval": "15s" } }, "informer": { "disk": { "metric_ttl": "30s", "metric_type": "freespace" }, "numpin": { "metric_ttl": "10s" } } } ``` This new format aims to be easily extensible per component. As such, it already surfaces quite a few new options which were hardcoded before. Additionally, since Go API have changed, some redundant methods have been removed and small refactoring has happened to take advantage of the new way. License: MIT Signed-off-by: Hector Sanjuan <hector@protocol.ai>
2017-10-11 18:23:03 +00:00
}
j = &configJSON{}
json.Unmarshal(ccfgTestJSON, j)
j.PrivateKey = "abc"
tst, _ = json.Marshal(j)
err = cfg.LoadJSON(tst)
if err == nil {
t.Error("expected error parsing private key")
}
j = &configJSON{}
json.Unmarshal(ccfgTestJSON, j)
j.ListenMultiaddress = "abc"
tst, _ = json.Marshal(j)
err = cfg.LoadJSON(tst)
if err == nil {
t.Error("expected error parsing listen_multiaddress")
}
j = &configJSON{}
json.Unmarshal(ccfgTestJSON, j)
j.Secret = "abc"
tst, _ = json.Marshal(j)
err = cfg.LoadJSON(tst)
if err == nil {
t.Error("expected error decoding secret")
}
j = &configJSON{}
json.Unmarshal(ccfgTestJSON, j)
j.ReplicationFactor = 0
j.ReplicationFactorMin = 0
j.ReplicationFactorMax = 0
tst, _ = json.Marshal(j)
cfg.LoadJSON(tst)
if cfg.ReplicationFactorMin != -1 || cfg.ReplicationFactorMax != -1 {
t.Error("expected default replication factor")
}
j = &configJSON{}
json.Unmarshal(ccfgTestJSON, j)
j.ReplicationFactor = 3
tst, _ = json.Marshal(j)
cfg.LoadJSON(tst)
if cfg.ReplicationFactorMin != 3 || cfg.ReplicationFactorMax != 3 {
t.Error("expected replicationFactor Min/Max override")
}
j = &configJSON{}
json.Unmarshal(ccfgTestJSON, j)
j.ReplicationFactorMin = -1
Issue #162: Rework configuration format The following commit reimplements ipfs-cluster configuration under the following premises: * Each component is initialized with a configuration object defined by its module * Each component decides how the JSON representation of its configuration looks like * Each component parses and validates its own configuration * Each component exposes its own defaults * Component configurations are make the sections of a central JSON configuration file (which replaces the current JSON format) * Component configurations implement a common interface (config.ComponentConfig) with a set of common operations * The central configuration file is managed by a config.ConfigManager which: * Registers ComponentConfigs * Assigns the correspondent sections from the JSON file to each component and delegates the parsing * Delegates the JSON generation for each section * Can be notified when the configuration is updated and must be saved to disk The new service.json would then look as follows: ```json { "cluster": { "id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2", "private_key": "<...>", "secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786", "peers": [], "bootstrap": [], "leave_on_shutdown": false, "listen_multiaddress": "/ip4/0.0.0.0/tcp/9096", "state_sync_interval": "1m0s", "ipfs_sync_interval": "2m10s", "replication_factor": -1, "monitor_ping_interval": "15s" }, "consensus": { "raft": { "heartbeat_timeout": "1s", "election_timeout": "1s", "commit_timeout": "50ms", "max_append_entries": 64, "trailing_logs": 10240, "snapshot_interval": "2m0s", "snapshot_threshold": 8192, "leader_lease_timeout": "500ms" } }, "api": { "restapi": { "listen_multiaddress": "/ip4/127.0.0.1/tcp/9094", "read_timeout": "30s", "read_header_timeout": "5s", "write_timeout": "1m0s", "idle_timeout": "2m0s" } }, "ipfs_connector": { "ipfshttp": { "proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095", "node_multiaddress": "/ip4/127.0.0.1/tcp/5001", "connect_swarms_delay": "7s", "proxy_read_timeout": "10m0s", "proxy_read_header_timeout": "5s", "proxy_write_timeout": "10m0s", "proxy_idle_timeout": "1m0s" } }, "monitor": { "monbasic": { "check_interval": "15s" } }, "informer": { "disk": { "metric_ttl": "30s", "metric_type": "freespace" }, "numpin": { "metric_ttl": "10s" } } } ``` This new format aims to be easily extensible per component. As such, it already surfaces quite a few new options which were hardcoded before. Additionally, since Go API have changed, some redundant methods have been removed and small refactoring has happened to take advantage of the new way. License: MIT Signed-off-by: Hector Sanjuan <hector@protocol.ai>
2017-10-11 18:23:03 +00:00
tst, _ = json.Marshal(j)
err = cfg.LoadJSON(tst)
if err == nil {
t.Error("expected error when only one replication factor is -1")
Issue #162: Rework configuration format The following commit reimplements ipfs-cluster configuration under the following premises: * Each component is initialized with a configuration object defined by its module * Each component decides how the JSON representation of its configuration looks like * Each component parses and validates its own configuration * Each component exposes its own defaults * Component configurations are make the sections of a central JSON configuration file (which replaces the current JSON format) * Component configurations implement a common interface (config.ComponentConfig) with a set of common operations * The central configuration file is managed by a config.ConfigManager which: * Registers ComponentConfigs * Assigns the correspondent sections from the JSON file to each component and delegates the parsing * Delegates the JSON generation for each section * Can be notified when the configuration is updated and must be saved to disk The new service.json would then look as follows: ```json { "cluster": { "id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2", "private_key": "<...>", "secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786", "peers": [], "bootstrap": [], "leave_on_shutdown": false, "listen_multiaddress": "/ip4/0.0.0.0/tcp/9096", "state_sync_interval": "1m0s", "ipfs_sync_interval": "2m10s", "replication_factor": -1, "monitor_ping_interval": "15s" }, "consensus": { "raft": { "heartbeat_timeout": "1s", "election_timeout": "1s", "commit_timeout": "50ms", "max_append_entries": 64, "trailing_logs": 10240, "snapshot_interval": "2m0s", "snapshot_threshold": 8192, "leader_lease_timeout": "500ms" } }, "api": { "restapi": { "listen_multiaddress": "/ip4/127.0.0.1/tcp/9094", "read_timeout": "30s", "read_header_timeout": "5s", "write_timeout": "1m0s", "idle_timeout": "2m0s" } }, "ipfs_connector": { "ipfshttp": { "proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095", "node_multiaddress": "/ip4/127.0.0.1/tcp/5001", "connect_swarms_delay": "7s", "proxy_read_timeout": "10m0s", "proxy_read_header_timeout": "5s", "proxy_write_timeout": "10m0s", "proxy_idle_timeout": "1m0s" } }, "monitor": { "monbasic": { "check_interval": "15s" } }, "informer": { "disk": { "metric_ttl": "30s", "metric_type": "freespace" }, "numpin": { "metric_ttl": "10s" } } } ``` This new format aims to be easily extensible per component. As such, it already surfaces quite a few new options which were hardcoded before. Additionally, since Go API have changed, some redundant methods have been removed and small refactoring has happened to take advantage of the new way. License: MIT Signed-off-by: Hector Sanjuan <hector@protocol.ai>
2017-10-11 18:23:03 +00:00
}
j = &configJSON{}
json.Unmarshal(ccfgTestJSON, j)
j.ReplicationFactorMin = 5
j.ReplicationFactorMax = 4
tst, _ = json.Marshal(j)
err = cfg.LoadJSON(tst)
if err == nil {
t.Error("expected error when only rplMin > rplMax")
}
j = &configJSON{}
json.Unmarshal(ccfgTestJSON, j)
j.ReplicationFactorMin = 0
j.ReplicationFactorMax = 0
tst, _ = json.Marshal(j)
err = cfg.LoadJSON(tst)
if cfg.ReplicationFactorMin != -1 || cfg.ReplicationFactorMax != -1 {
t.Error("expected default replication factors")
}
Issue #162: Rework configuration format The following commit reimplements ipfs-cluster configuration under the following premises: * Each component is initialized with a configuration object defined by its module * Each component decides how the JSON representation of its configuration looks like * Each component parses and validates its own configuration * Each component exposes its own defaults * Component configurations are make the sections of a central JSON configuration file (which replaces the current JSON format) * Component configurations implement a common interface (config.ComponentConfig) with a set of common operations * The central configuration file is managed by a config.ConfigManager which: * Registers ComponentConfigs * Assigns the correspondent sections from the JSON file to each component and delegates the parsing * Delegates the JSON generation for each section * Can be notified when the configuration is updated and must be saved to disk The new service.json would then look as follows: ```json { "cluster": { "id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2", "private_key": "<...>", "secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786", "peers": [], "bootstrap": [], "leave_on_shutdown": false, "listen_multiaddress": "/ip4/0.0.0.0/tcp/9096", "state_sync_interval": "1m0s", "ipfs_sync_interval": "2m10s", "replication_factor": -1, "monitor_ping_interval": "15s" }, "consensus": { "raft": { "heartbeat_timeout": "1s", "election_timeout": "1s", "commit_timeout": "50ms", "max_append_entries": 64, "trailing_logs": 10240, "snapshot_interval": "2m0s", "snapshot_threshold": 8192, "leader_lease_timeout": "500ms" } }, "api": { "restapi": { "listen_multiaddress": "/ip4/127.0.0.1/tcp/9094", "read_timeout": "30s", "read_header_timeout": "5s", "write_timeout": "1m0s", "idle_timeout": "2m0s" } }, "ipfs_connector": { "ipfshttp": { "proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095", "node_multiaddress": "/ip4/127.0.0.1/tcp/5001", "connect_swarms_delay": "7s", "proxy_read_timeout": "10m0s", "proxy_read_header_timeout": "5s", "proxy_write_timeout": "10m0s", "proxy_idle_timeout": "1m0s" } }, "monitor": { "monbasic": { "check_interval": "15s" } }, "informer": { "disk": { "metric_ttl": "30s", "metric_type": "freespace" }, "numpin": { "metric_ttl": "10s" } } } ``` This new format aims to be easily extensible per component. As such, it already surfaces quite a few new options which were hardcoded before. Additionally, since Go API have changed, some redundant methods have been removed and small refactoring has happened to take advantage of the new way. License: MIT Signed-off-by: Hector Sanjuan <hector@protocol.ai>
2017-10-11 18:23:03 +00:00
}
func TestToJSON(t *testing.T) {
cfg := &Config{}
cfg.LoadJSON(ccfgTestJSON)
newjson, err := cfg.ToJSON()
if err != nil {
t.Fatal(err)
}
cfg = &Config{}
err = cfg.LoadJSON(newjson)
Issue #162: Rework configuration format The following commit reimplements ipfs-cluster configuration under the following premises: * Each component is initialized with a configuration object defined by its module * Each component decides how the JSON representation of its configuration looks like * Each component parses and validates its own configuration * Each component exposes its own defaults * Component configurations are make the sections of a central JSON configuration file (which replaces the current JSON format) * Component configurations implement a common interface (config.ComponentConfig) with a set of common operations * The central configuration file is managed by a config.ConfigManager which: * Registers ComponentConfigs * Assigns the correspondent sections from the JSON file to each component and delegates the parsing * Delegates the JSON generation for each section * Can be notified when the configuration is updated and must be saved to disk The new service.json would then look as follows: ```json { "cluster": { "id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2", "private_key": "<...>", "secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786", "peers": [], "bootstrap": [], "leave_on_shutdown": false, "listen_multiaddress": "/ip4/0.0.0.0/tcp/9096", "state_sync_interval": "1m0s", "ipfs_sync_interval": "2m10s", "replication_factor": -1, "monitor_ping_interval": "15s" }, "consensus": { "raft": { "heartbeat_timeout": "1s", "election_timeout": "1s", "commit_timeout": "50ms", "max_append_entries": 64, "trailing_logs": 10240, "snapshot_interval": "2m0s", "snapshot_threshold": 8192, "leader_lease_timeout": "500ms" } }, "api": { "restapi": { "listen_multiaddress": "/ip4/127.0.0.1/tcp/9094", "read_timeout": "30s", "read_header_timeout": "5s", "write_timeout": "1m0s", "idle_timeout": "2m0s" } }, "ipfs_connector": { "ipfshttp": { "proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095", "node_multiaddress": "/ip4/127.0.0.1/tcp/5001", "connect_swarms_delay": "7s", "proxy_read_timeout": "10m0s", "proxy_read_header_timeout": "5s", "proxy_write_timeout": "10m0s", "proxy_idle_timeout": "1m0s" } }, "monitor": { "monbasic": { "check_interval": "15s" } }, "informer": { "disk": { "metric_ttl": "30s", "metric_type": "freespace" }, "numpin": { "metric_ttl": "10s" } } } ``` This new format aims to be easily extensible per component. As such, it already surfaces quite a few new options which were hardcoded before. Additionally, since Go API have changed, some redundant methods have been removed and small refactoring has happened to take advantage of the new way. License: MIT Signed-off-by: Hector Sanjuan <hector@protocol.ai>
2017-10-11 18:23:03 +00:00
if err != nil {
t.Fatal(err)
}
}
func TestDefault(t *testing.T) {
cfg := &Config{}
cfg.Default()
if err := cfg.Validate(); err != nil {
t.Fatal(err)
}
}
func TestValidate(t *testing.T) {
cfg := &Config{}
cfg.Default()
cfg.ID = ""
if cfg.Validate() == nil {
Issue #162: Rework configuration format The following commit reimplements ipfs-cluster configuration under the following premises: * Each component is initialized with a configuration object defined by its module * Each component decides how the JSON representation of its configuration looks like * Each component parses and validates its own configuration * Each component exposes its own defaults * Component configurations are make the sections of a central JSON configuration file (which replaces the current JSON format) * Component configurations implement a common interface (config.ComponentConfig) with a set of common operations * The central configuration file is managed by a config.ConfigManager which: * Registers ComponentConfigs * Assigns the correspondent sections from the JSON file to each component and delegates the parsing * Delegates the JSON generation for each section * Can be notified when the configuration is updated and must be saved to disk The new service.json would then look as follows: ```json { "cluster": { "id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2", "private_key": "<...>", "secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786", "peers": [], "bootstrap": [], "leave_on_shutdown": false, "listen_multiaddress": "/ip4/0.0.0.0/tcp/9096", "state_sync_interval": "1m0s", "ipfs_sync_interval": "2m10s", "replication_factor": -1, "monitor_ping_interval": "15s" }, "consensus": { "raft": { "heartbeat_timeout": "1s", "election_timeout": "1s", "commit_timeout": "50ms", "max_append_entries": 64, "trailing_logs": 10240, "snapshot_interval": "2m0s", "snapshot_threshold": 8192, "leader_lease_timeout": "500ms" } }, "api": { "restapi": { "listen_multiaddress": "/ip4/127.0.0.1/tcp/9094", "read_timeout": "30s", "read_header_timeout": "5s", "write_timeout": "1m0s", "idle_timeout": "2m0s" } }, "ipfs_connector": { "ipfshttp": { "proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095", "node_multiaddress": "/ip4/127.0.0.1/tcp/5001", "connect_swarms_delay": "7s", "proxy_read_timeout": "10m0s", "proxy_read_header_timeout": "5s", "proxy_write_timeout": "10m0s", "proxy_idle_timeout": "1m0s" } }, "monitor": { "monbasic": { "check_interval": "15s" } }, "informer": { "disk": { "metric_ttl": "30s", "metric_type": "freespace" }, "numpin": { "metric_ttl": "10s" } } } ``` This new format aims to be easily extensible per component. As such, it already surfaces quite a few new options which were hardcoded before. Additionally, since Go API have changed, some redundant methods have been removed and small refactoring has happened to take advantage of the new way. License: MIT Signed-off-by: Hector Sanjuan <hector@protocol.ai>
2017-10-11 18:23:03 +00:00
t.Fatal("expected error validating")
}
cfg.Default()
cfg.MonitorPingInterval = 0
if cfg.Validate() == nil {
Issue #162: Rework configuration format The following commit reimplements ipfs-cluster configuration under the following premises: * Each component is initialized with a configuration object defined by its module * Each component decides how the JSON representation of its configuration looks like * Each component parses and validates its own configuration * Each component exposes its own defaults * Component configurations are make the sections of a central JSON configuration file (which replaces the current JSON format) * Component configurations implement a common interface (config.ComponentConfig) with a set of common operations * The central configuration file is managed by a config.ConfigManager which: * Registers ComponentConfigs * Assigns the correspondent sections from the JSON file to each component and delegates the parsing * Delegates the JSON generation for each section * Can be notified when the configuration is updated and must be saved to disk The new service.json would then look as follows: ```json { "cluster": { "id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2", "private_key": "<...>", "secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786", "peers": [], "bootstrap": [], "leave_on_shutdown": false, "listen_multiaddress": "/ip4/0.0.0.0/tcp/9096", "state_sync_interval": "1m0s", "ipfs_sync_interval": "2m10s", "replication_factor": -1, "monitor_ping_interval": "15s" }, "consensus": { "raft": { "heartbeat_timeout": "1s", "election_timeout": "1s", "commit_timeout": "50ms", "max_append_entries": 64, "trailing_logs": 10240, "snapshot_interval": "2m0s", "snapshot_threshold": 8192, "leader_lease_timeout": "500ms" } }, "api": { "restapi": { "listen_multiaddress": "/ip4/127.0.0.1/tcp/9094", "read_timeout": "30s", "read_header_timeout": "5s", "write_timeout": "1m0s", "idle_timeout": "2m0s" } }, "ipfs_connector": { "ipfshttp": { "proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095", "node_multiaddress": "/ip4/127.0.0.1/tcp/5001", "connect_swarms_delay": "7s", "proxy_read_timeout": "10m0s", "proxy_read_header_timeout": "5s", "proxy_write_timeout": "10m0s", "proxy_idle_timeout": "1m0s" } }, "monitor": { "monbasic": { "check_interval": "15s" } }, "informer": { "disk": { "metric_ttl": "30s", "metric_type": "freespace" }, "numpin": { "metric_ttl": "10s" } } } ``` This new format aims to be easily extensible per component. As such, it already surfaces quite a few new options which were hardcoded before. Additionally, since Go API have changed, some redundant methods have been removed and small refactoring has happened to take advantage of the new way. License: MIT Signed-off-by: Hector Sanjuan <hector@protocol.ai>
2017-10-11 18:23:03 +00:00
t.Fatal("expected error validating")
}
cfg.Default()
cfg.ReplicationFactorMin = 10
cfg.ReplicationFactorMax = 5
if cfg.Validate() == nil {
t.Fatal("expected error validating")
}
cfg.Default()
cfg.ReplicationFactorMin = 0
if cfg.Validate() == nil {
t.Fatal("expected error validating")
}
Issue #162: Rework configuration format The following commit reimplements ipfs-cluster configuration under the following premises: * Each component is initialized with a configuration object defined by its module * Each component decides how the JSON representation of its configuration looks like * Each component parses and validates its own configuration * Each component exposes its own defaults * Component configurations are make the sections of a central JSON configuration file (which replaces the current JSON format) * Component configurations implement a common interface (config.ComponentConfig) with a set of common operations * The central configuration file is managed by a config.ConfigManager which: * Registers ComponentConfigs * Assigns the correspondent sections from the JSON file to each component and delegates the parsing * Delegates the JSON generation for each section * Can be notified when the configuration is updated and must be saved to disk The new service.json would then look as follows: ```json { "cluster": { "id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2", "private_key": "<...>", "secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786", "peers": [], "bootstrap": [], "leave_on_shutdown": false, "listen_multiaddress": "/ip4/0.0.0.0/tcp/9096", "state_sync_interval": "1m0s", "ipfs_sync_interval": "2m10s", "replication_factor": -1, "monitor_ping_interval": "15s" }, "consensus": { "raft": { "heartbeat_timeout": "1s", "election_timeout": "1s", "commit_timeout": "50ms", "max_append_entries": 64, "trailing_logs": 10240, "snapshot_interval": "2m0s", "snapshot_threshold": 8192, "leader_lease_timeout": "500ms" } }, "api": { "restapi": { "listen_multiaddress": "/ip4/127.0.0.1/tcp/9094", "read_timeout": "30s", "read_header_timeout": "5s", "write_timeout": "1m0s", "idle_timeout": "2m0s" } }, "ipfs_connector": { "ipfshttp": { "proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095", "node_multiaddress": "/ip4/127.0.0.1/tcp/5001", "connect_swarms_delay": "7s", "proxy_read_timeout": "10m0s", "proxy_read_header_timeout": "5s", "proxy_write_timeout": "10m0s", "proxy_idle_timeout": "1m0s" } }, "monitor": { "monbasic": { "check_interval": "15s" } }, "informer": { "disk": { "metric_ttl": "30s", "metric_type": "freespace" }, "numpin": { "metric_ttl": "10s" } } } ``` This new format aims to be easily extensible per component. As such, it already surfaces quite a few new options which were hardcoded before. Additionally, since Go API have changed, some redundant methods have been removed and small refactoring has happened to take advantage of the new way. License: MIT Signed-off-by: Hector Sanjuan <hector@protocol.ai>
2017-10-11 18:23:03 +00:00
}