Issue #162: Rework configuration format
The following commit reimplements ipfs-cluster configuration under
the following premises:
* Each component is initialized with a configuration object
defined by its module
* Each component decides how the JSON representation of its
configuration looks like
* Each component parses and validates its own configuration
* Each component exposes its own defaults
* Component configurations are make the sections of a
central JSON configuration file (which replaces the current
JSON format)
* Component configurations implement a common interface
(config.ComponentConfig) with a set of common operations
* The central configuration file is managed by a
config.ConfigManager which:
* Registers ComponentConfigs
* Assigns the correspondent sections from the JSON file to each
component and delegates the parsing
* Delegates the JSON generation for each section
* Can be notified when the configuration is updated and must be
saved to disk
The new service.json would then look as follows:
```json
{
"cluster": {
"id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2",
"private_key": "<...>",
"secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786",
"peers": [],
"bootstrap": [],
"leave_on_shutdown": false,
"listen_multiaddress": "/ip4/0.0.0.0/tcp/9096",
"state_sync_interval": "1m0s",
"ipfs_sync_interval": "2m10s",
"replication_factor": -1,
"monitor_ping_interval": "15s"
},
"consensus": {
"raft": {
"heartbeat_timeout": "1s",
"election_timeout": "1s",
"commit_timeout": "50ms",
"max_append_entries": 64,
"trailing_logs": 10240,
"snapshot_interval": "2m0s",
"snapshot_threshold": 8192,
"leader_lease_timeout": "500ms"
}
},
"api": {
"restapi": {
"listen_multiaddress": "/ip4/127.0.0.1/tcp/9094",
"read_timeout": "30s",
"read_header_timeout": "5s",
"write_timeout": "1m0s",
"idle_timeout": "2m0s"
}
},
"ipfs_connector": {
"ipfshttp": {
"proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095",
"node_multiaddress": "/ip4/127.0.0.1/tcp/5001",
"connect_swarms_delay": "7s",
"proxy_read_timeout": "10m0s",
"proxy_read_header_timeout": "5s",
"proxy_write_timeout": "10m0s",
"proxy_idle_timeout": "1m0s"
}
},
"monitor": {
"monbasic": {
"check_interval": "15s"
}
},
"informer": {
"disk": {
"metric_ttl": "30s",
"metric_type": "freespace"
},
"numpin": {
"metric_ttl": "10s"
}
}
}
```
This new format aims to be easily extensible per component. As such,
it already surfaces quite a few new options which were hardcoded
before.
Additionally, since Go API have changed, some redundant methods have been
removed and small refactoring has happened to take advantage of the new
way.
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>
2017-10-11 18:23:03 +00:00
|
|
|
package rest
|
|
|
|
|
|
|
|
import (
|
|
|
|
"crypto/tls"
|
2018-03-14 20:59:28 +00:00
|
|
|
"encoding/base64"
|
Issue #162: Rework configuration format
The following commit reimplements ipfs-cluster configuration under
the following premises:
* Each component is initialized with a configuration object
defined by its module
* Each component decides how the JSON representation of its
configuration looks like
* Each component parses and validates its own configuration
* Each component exposes its own defaults
* Component configurations are make the sections of a
central JSON configuration file (which replaces the current
JSON format)
* Component configurations implement a common interface
(config.ComponentConfig) with a set of common operations
* The central configuration file is managed by a
config.ConfigManager which:
* Registers ComponentConfigs
* Assigns the correspondent sections from the JSON file to each
component and delegates the parsing
* Delegates the JSON generation for each section
* Can be notified when the configuration is updated and must be
saved to disk
The new service.json would then look as follows:
```json
{
"cluster": {
"id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2",
"private_key": "<...>",
"secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786",
"peers": [],
"bootstrap": [],
"leave_on_shutdown": false,
"listen_multiaddress": "/ip4/0.0.0.0/tcp/9096",
"state_sync_interval": "1m0s",
"ipfs_sync_interval": "2m10s",
"replication_factor": -1,
"monitor_ping_interval": "15s"
},
"consensus": {
"raft": {
"heartbeat_timeout": "1s",
"election_timeout": "1s",
"commit_timeout": "50ms",
"max_append_entries": 64,
"trailing_logs": 10240,
"snapshot_interval": "2m0s",
"snapshot_threshold": 8192,
"leader_lease_timeout": "500ms"
}
},
"api": {
"restapi": {
"listen_multiaddress": "/ip4/127.0.0.1/tcp/9094",
"read_timeout": "30s",
"read_header_timeout": "5s",
"write_timeout": "1m0s",
"idle_timeout": "2m0s"
}
},
"ipfs_connector": {
"ipfshttp": {
"proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095",
"node_multiaddress": "/ip4/127.0.0.1/tcp/5001",
"connect_swarms_delay": "7s",
"proxy_read_timeout": "10m0s",
"proxy_read_header_timeout": "5s",
"proxy_write_timeout": "10m0s",
"proxy_idle_timeout": "1m0s"
}
},
"monitor": {
"monbasic": {
"check_interval": "15s"
}
},
"informer": {
"disk": {
"metric_ttl": "30s",
"metric_type": "freespace"
},
"numpin": {
"metric_ttl": "10s"
}
}
}
```
This new format aims to be easily extensible per component. As such,
it already surfaces quite a few new options which were hardcoded
before.
Additionally, since Go API have changed, some redundant methods have been
removed and small refactoring has happened to take advantage of the new
way.
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>
2017-10-11 18:23:03 +00:00
|
|
|
"encoding/json"
|
|
|
|
"errors"
|
|
|
|
"fmt"
|
2019-01-11 12:25:21 +00:00
|
|
|
"net/http"
|
Issue #162: Rework configuration format
The following commit reimplements ipfs-cluster configuration under
the following premises:
* Each component is initialized with a configuration object
defined by its module
* Each component decides how the JSON representation of its
configuration looks like
* Each component parses and validates its own configuration
* Each component exposes its own defaults
* Component configurations are make the sections of a
central JSON configuration file (which replaces the current
JSON format)
* Component configurations implement a common interface
(config.ComponentConfig) with a set of common operations
* The central configuration file is managed by a
config.ConfigManager which:
* Registers ComponentConfigs
* Assigns the correspondent sections from the JSON file to each
component and delegates the parsing
* Delegates the JSON generation for each section
* Can be notified when the configuration is updated and must be
saved to disk
The new service.json would then look as follows:
```json
{
"cluster": {
"id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2",
"private_key": "<...>",
"secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786",
"peers": [],
"bootstrap": [],
"leave_on_shutdown": false,
"listen_multiaddress": "/ip4/0.0.0.0/tcp/9096",
"state_sync_interval": "1m0s",
"ipfs_sync_interval": "2m10s",
"replication_factor": -1,
"monitor_ping_interval": "15s"
},
"consensus": {
"raft": {
"heartbeat_timeout": "1s",
"election_timeout": "1s",
"commit_timeout": "50ms",
"max_append_entries": 64,
"trailing_logs": 10240,
"snapshot_interval": "2m0s",
"snapshot_threshold": 8192,
"leader_lease_timeout": "500ms"
}
},
"api": {
"restapi": {
"listen_multiaddress": "/ip4/127.0.0.1/tcp/9094",
"read_timeout": "30s",
"read_header_timeout": "5s",
"write_timeout": "1m0s",
"idle_timeout": "2m0s"
}
},
"ipfs_connector": {
"ipfshttp": {
"proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095",
"node_multiaddress": "/ip4/127.0.0.1/tcp/5001",
"connect_swarms_delay": "7s",
"proxy_read_timeout": "10m0s",
"proxy_read_header_timeout": "5s",
"proxy_write_timeout": "10m0s",
"proxy_idle_timeout": "1m0s"
}
},
"monitor": {
"monbasic": {
"check_interval": "15s"
}
},
"informer": {
"disk": {
"metric_ttl": "30s",
"metric_type": "freespace"
},
"numpin": {
"metric_ttl": "10s"
}
}
}
```
This new format aims to be easily extensible per component. As such,
it already surfaces quite a few new options which were hardcoded
before.
Additionally, since Go API have changed, some redundant methods have been
removed and small refactoring has happened to take advantage of the new
way.
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>
2017-10-11 18:23:03 +00:00
|
|
|
"path/filepath"
|
|
|
|
"time"
|
|
|
|
|
2020-02-28 16:16:16 +00:00
|
|
|
ipfsconfig "github.com/ipfs/go-ipfs-config"
|
2019-06-14 10:41:11 +00:00
|
|
|
crypto "github.com/libp2p/go-libp2p-core/crypto"
|
|
|
|
peer "github.com/libp2p/go-libp2p-core/peer"
|
Issue #162: Rework configuration format
The following commit reimplements ipfs-cluster configuration under
the following premises:
* Each component is initialized with a configuration object
defined by its module
* Each component decides how the JSON representation of its
configuration looks like
* Each component parses and validates its own configuration
* Each component exposes its own defaults
* Component configurations are make the sections of a
central JSON configuration file (which replaces the current
JSON format)
* Component configurations implement a common interface
(config.ComponentConfig) with a set of common operations
* The central configuration file is managed by a
config.ConfigManager which:
* Registers ComponentConfigs
* Assigns the correspondent sections from the JSON file to each
component and delegates the parsing
* Delegates the JSON generation for each section
* Can be notified when the configuration is updated and must be
saved to disk
The new service.json would then look as follows:
```json
{
"cluster": {
"id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2",
"private_key": "<...>",
"secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786",
"peers": [],
"bootstrap": [],
"leave_on_shutdown": false,
"listen_multiaddress": "/ip4/0.0.0.0/tcp/9096",
"state_sync_interval": "1m0s",
"ipfs_sync_interval": "2m10s",
"replication_factor": -1,
"monitor_ping_interval": "15s"
},
"consensus": {
"raft": {
"heartbeat_timeout": "1s",
"election_timeout": "1s",
"commit_timeout": "50ms",
"max_append_entries": 64,
"trailing_logs": 10240,
"snapshot_interval": "2m0s",
"snapshot_threshold": 8192,
"leader_lease_timeout": "500ms"
}
},
"api": {
"restapi": {
"listen_multiaddress": "/ip4/127.0.0.1/tcp/9094",
"read_timeout": "30s",
"read_header_timeout": "5s",
"write_timeout": "1m0s",
"idle_timeout": "2m0s"
}
},
"ipfs_connector": {
"ipfshttp": {
"proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095",
"node_multiaddress": "/ip4/127.0.0.1/tcp/5001",
"connect_swarms_delay": "7s",
"proxy_read_timeout": "10m0s",
"proxy_read_header_timeout": "5s",
"proxy_write_timeout": "10m0s",
"proxy_idle_timeout": "1m0s"
}
},
"monitor": {
"monbasic": {
"check_interval": "15s"
}
},
"informer": {
"disk": {
"metric_ttl": "30s",
"metric_type": "freespace"
},
"numpin": {
"metric_ttl": "10s"
}
}
}
```
This new format aims to be easily extensible per component. As such,
it already surfaces quite a few new options which were hardcoded
before.
Additionally, since Go API have changed, some redundant methods have been
removed and small refactoring has happened to take advantage of the new
way.
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>
2017-10-11 18:23:03 +00:00
|
|
|
ma "github.com/multiformats/go-multiaddr"
|
2019-06-14 10:41:11 +00:00
|
|
|
|
|
|
|
"github.com/kelseyhightower/envconfig"
|
|
|
|
"github.com/rs/cors"
|
2020-02-28 16:16:16 +00:00
|
|
|
|
|
|
|
"github.com/ipfs/ipfs-cluster/config"
|
Issue #162: Rework configuration format
The following commit reimplements ipfs-cluster configuration under
the following premises:
* Each component is initialized with a configuration object
defined by its module
* Each component decides how the JSON representation of its
configuration looks like
* Each component parses and validates its own configuration
* Each component exposes its own defaults
* Component configurations are make the sections of a
central JSON configuration file (which replaces the current
JSON format)
* Component configurations implement a common interface
(config.ComponentConfig) with a set of common operations
* The central configuration file is managed by a
config.ConfigManager which:
* Registers ComponentConfigs
* Assigns the correspondent sections from the JSON file to each
component and delegates the parsing
* Delegates the JSON generation for each section
* Can be notified when the configuration is updated and must be
saved to disk
The new service.json would then look as follows:
```json
{
"cluster": {
"id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2",
"private_key": "<...>",
"secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786",
"peers": [],
"bootstrap": [],
"leave_on_shutdown": false,
"listen_multiaddress": "/ip4/0.0.0.0/tcp/9096",
"state_sync_interval": "1m0s",
"ipfs_sync_interval": "2m10s",
"replication_factor": -1,
"monitor_ping_interval": "15s"
},
"consensus": {
"raft": {
"heartbeat_timeout": "1s",
"election_timeout": "1s",
"commit_timeout": "50ms",
"max_append_entries": 64,
"trailing_logs": 10240,
"snapshot_interval": "2m0s",
"snapshot_threshold": 8192,
"leader_lease_timeout": "500ms"
}
},
"api": {
"restapi": {
"listen_multiaddress": "/ip4/127.0.0.1/tcp/9094",
"read_timeout": "30s",
"read_header_timeout": "5s",
"write_timeout": "1m0s",
"idle_timeout": "2m0s"
}
},
"ipfs_connector": {
"ipfshttp": {
"proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095",
"node_multiaddress": "/ip4/127.0.0.1/tcp/5001",
"connect_swarms_delay": "7s",
"proxy_read_timeout": "10m0s",
"proxy_read_header_timeout": "5s",
"proxy_write_timeout": "10m0s",
"proxy_idle_timeout": "1m0s"
}
},
"monitor": {
"monbasic": {
"check_interval": "15s"
}
},
"informer": {
"disk": {
"metric_ttl": "30s",
"metric_type": "freespace"
},
"numpin": {
"metric_ttl": "10s"
}
}
}
```
This new format aims to be easily extensible per component. As such,
it already surfaces quite a few new options which were hardcoded
before.
Additionally, since Go API have changed, some redundant methods have been
removed and small refactoring has happened to take advantage of the new
way.
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>
2017-10-11 18:23:03 +00:00
|
|
|
)
|
|
|
|
|
|
|
|
const configKey = "restapi"
|
2018-11-09 03:20:25 +00:00
|
|
|
const envConfigKey = "cluster_restapi"
|
Issue #162: Rework configuration format
The following commit reimplements ipfs-cluster configuration under
the following premises:
* Each component is initialized with a configuration object
defined by its module
* Each component decides how the JSON representation of its
configuration looks like
* Each component parses and validates its own configuration
* Each component exposes its own defaults
* Component configurations are make the sections of a
central JSON configuration file (which replaces the current
JSON format)
* Component configurations implement a common interface
(config.ComponentConfig) with a set of common operations
* The central configuration file is managed by a
config.ConfigManager which:
* Registers ComponentConfigs
* Assigns the correspondent sections from the JSON file to each
component and delegates the parsing
* Delegates the JSON generation for each section
* Can be notified when the configuration is updated and must be
saved to disk
The new service.json would then look as follows:
```json
{
"cluster": {
"id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2",
"private_key": "<...>",
"secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786",
"peers": [],
"bootstrap": [],
"leave_on_shutdown": false,
"listen_multiaddress": "/ip4/0.0.0.0/tcp/9096",
"state_sync_interval": "1m0s",
"ipfs_sync_interval": "2m10s",
"replication_factor": -1,
"monitor_ping_interval": "15s"
},
"consensus": {
"raft": {
"heartbeat_timeout": "1s",
"election_timeout": "1s",
"commit_timeout": "50ms",
"max_append_entries": 64,
"trailing_logs": 10240,
"snapshot_interval": "2m0s",
"snapshot_threshold": 8192,
"leader_lease_timeout": "500ms"
}
},
"api": {
"restapi": {
"listen_multiaddress": "/ip4/127.0.0.1/tcp/9094",
"read_timeout": "30s",
"read_header_timeout": "5s",
"write_timeout": "1m0s",
"idle_timeout": "2m0s"
}
},
"ipfs_connector": {
"ipfshttp": {
"proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095",
"node_multiaddress": "/ip4/127.0.0.1/tcp/5001",
"connect_swarms_delay": "7s",
"proxy_read_timeout": "10m0s",
"proxy_read_header_timeout": "5s",
"proxy_write_timeout": "10m0s",
"proxy_idle_timeout": "1m0s"
}
},
"monitor": {
"monbasic": {
"check_interval": "15s"
}
},
"informer": {
"disk": {
"metric_ttl": "30s",
"metric_type": "freespace"
},
"numpin": {
"metric_ttl": "10s"
}
}
}
```
This new format aims to be easily extensible per component. As such,
it already surfaces quite a few new options which were hardcoded
before.
Additionally, since Go API have changed, some redundant methods have been
removed and small refactoring has happened to take advantage of the new
way.
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>
2017-10-11 18:23:03 +00:00
|
|
|
|
2019-03-07 05:28:06 +00:00
|
|
|
const minMaxHeaderBytes = 4096
|
|
|
|
|
2020-02-28 16:16:16 +00:00
|
|
|
// DefaultHTTPListenAddrs contains default listen addresses for the HTTP API.
|
|
|
|
var DefaultHTTPListenAddrs = []string{
|
|
|
|
"/ip4/127.0.0.1/tcp/9094",
|
|
|
|
}
|
|
|
|
|
Issue #162: Rework configuration format
The following commit reimplements ipfs-cluster configuration under
the following premises:
* Each component is initialized with a configuration object
defined by its module
* Each component decides how the JSON representation of its
configuration looks like
* Each component parses and validates its own configuration
* Each component exposes its own defaults
* Component configurations are make the sections of a
central JSON configuration file (which replaces the current
JSON format)
* Component configurations implement a common interface
(config.ComponentConfig) with a set of common operations
* The central configuration file is managed by a
config.ConfigManager which:
* Registers ComponentConfigs
* Assigns the correspondent sections from the JSON file to each
component and delegates the parsing
* Delegates the JSON generation for each section
* Can be notified when the configuration is updated and must be
saved to disk
The new service.json would then look as follows:
```json
{
"cluster": {
"id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2",
"private_key": "<...>",
"secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786",
"peers": [],
"bootstrap": [],
"leave_on_shutdown": false,
"listen_multiaddress": "/ip4/0.0.0.0/tcp/9096",
"state_sync_interval": "1m0s",
"ipfs_sync_interval": "2m10s",
"replication_factor": -1,
"monitor_ping_interval": "15s"
},
"consensus": {
"raft": {
"heartbeat_timeout": "1s",
"election_timeout": "1s",
"commit_timeout": "50ms",
"max_append_entries": 64,
"trailing_logs": 10240,
"snapshot_interval": "2m0s",
"snapshot_threshold": 8192,
"leader_lease_timeout": "500ms"
}
},
"api": {
"restapi": {
"listen_multiaddress": "/ip4/127.0.0.1/tcp/9094",
"read_timeout": "30s",
"read_header_timeout": "5s",
"write_timeout": "1m0s",
"idle_timeout": "2m0s"
}
},
"ipfs_connector": {
"ipfshttp": {
"proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095",
"node_multiaddress": "/ip4/127.0.0.1/tcp/5001",
"connect_swarms_delay": "7s",
"proxy_read_timeout": "10m0s",
"proxy_read_header_timeout": "5s",
"proxy_write_timeout": "10m0s",
"proxy_idle_timeout": "1m0s"
}
},
"monitor": {
"monbasic": {
"check_interval": "15s"
}
},
"informer": {
"disk": {
"metric_ttl": "30s",
"metric_type": "freespace"
},
"numpin": {
"metric_ttl": "10s"
}
}
}
```
This new format aims to be easily extensible per component. As such,
it already surfaces quite a few new options which were hardcoded
before.
Additionally, since Go API have changed, some redundant methods have been
removed and small refactoring has happened to take advantage of the new
way.
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>
2017-10-11 18:23:03 +00:00
|
|
|
// These are the default values for Config
|
|
|
|
const (
|
2018-08-08 19:11:26 +00:00
|
|
|
DefaultReadTimeout = 0
|
Issue #162: Rework configuration format
The following commit reimplements ipfs-cluster configuration under
the following premises:
* Each component is initialized with a configuration object
defined by its module
* Each component decides how the JSON representation of its
configuration looks like
* Each component parses and validates its own configuration
* Each component exposes its own defaults
* Component configurations are make the sections of a
central JSON configuration file (which replaces the current
JSON format)
* Component configurations implement a common interface
(config.ComponentConfig) with a set of common operations
* The central configuration file is managed by a
config.ConfigManager which:
* Registers ComponentConfigs
* Assigns the correspondent sections from the JSON file to each
component and delegates the parsing
* Delegates the JSON generation for each section
* Can be notified when the configuration is updated and must be
saved to disk
The new service.json would then look as follows:
```json
{
"cluster": {
"id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2",
"private_key": "<...>",
"secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786",
"peers": [],
"bootstrap": [],
"leave_on_shutdown": false,
"listen_multiaddress": "/ip4/0.0.0.0/tcp/9096",
"state_sync_interval": "1m0s",
"ipfs_sync_interval": "2m10s",
"replication_factor": -1,
"monitor_ping_interval": "15s"
},
"consensus": {
"raft": {
"heartbeat_timeout": "1s",
"election_timeout": "1s",
"commit_timeout": "50ms",
"max_append_entries": 64,
"trailing_logs": 10240,
"snapshot_interval": "2m0s",
"snapshot_threshold": 8192,
"leader_lease_timeout": "500ms"
}
},
"api": {
"restapi": {
"listen_multiaddress": "/ip4/127.0.0.1/tcp/9094",
"read_timeout": "30s",
"read_header_timeout": "5s",
"write_timeout": "1m0s",
"idle_timeout": "2m0s"
}
},
"ipfs_connector": {
"ipfshttp": {
"proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095",
"node_multiaddress": "/ip4/127.0.0.1/tcp/5001",
"connect_swarms_delay": "7s",
"proxy_read_timeout": "10m0s",
"proxy_read_header_timeout": "5s",
"proxy_write_timeout": "10m0s",
"proxy_idle_timeout": "1m0s"
}
},
"monitor": {
"monbasic": {
"check_interval": "15s"
}
},
"informer": {
"disk": {
"metric_ttl": "30s",
"metric_type": "freespace"
},
"numpin": {
"metric_ttl": "10s"
}
}
}
```
This new format aims to be easily extensible per component. As such,
it already surfaces quite a few new options which were hardcoded
before.
Additionally, since Go API have changed, some redundant methods have been
removed and small refactoring has happened to take advantage of the new
way.
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>
2017-10-11 18:23:03 +00:00
|
|
|
DefaultReadHeaderTimeout = 5 * time.Second
|
2018-08-08 19:11:26 +00:00
|
|
|
DefaultWriteTimeout = 0
|
Issue #162: Rework configuration format
The following commit reimplements ipfs-cluster configuration under
the following premises:
* Each component is initialized with a configuration object
defined by its module
* Each component decides how the JSON representation of its
configuration looks like
* Each component parses and validates its own configuration
* Each component exposes its own defaults
* Component configurations are make the sections of a
central JSON configuration file (which replaces the current
JSON format)
* Component configurations implement a common interface
(config.ComponentConfig) with a set of common operations
* The central configuration file is managed by a
config.ConfigManager which:
* Registers ComponentConfigs
* Assigns the correspondent sections from the JSON file to each
component and delegates the parsing
* Delegates the JSON generation for each section
* Can be notified when the configuration is updated and must be
saved to disk
The new service.json would then look as follows:
```json
{
"cluster": {
"id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2",
"private_key": "<...>",
"secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786",
"peers": [],
"bootstrap": [],
"leave_on_shutdown": false,
"listen_multiaddress": "/ip4/0.0.0.0/tcp/9096",
"state_sync_interval": "1m0s",
"ipfs_sync_interval": "2m10s",
"replication_factor": -1,
"monitor_ping_interval": "15s"
},
"consensus": {
"raft": {
"heartbeat_timeout": "1s",
"election_timeout": "1s",
"commit_timeout": "50ms",
"max_append_entries": 64,
"trailing_logs": 10240,
"snapshot_interval": "2m0s",
"snapshot_threshold": 8192,
"leader_lease_timeout": "500ms"
}
},
"api": {
"restapi": {
"listen_multiaddress": "/ip4/127.0.0.1/tcp/9094",
"read_timeout": "30s",
"read_header_timeout": "5s",
"write_timeout": "1m0s",
"idle_timeout": "2m0s"
}
},
"ipfs_connector": {
"ipfshttp": {
"proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095",
"node_multiaddress": "/ip4/127.0.0.1/tcp/5001",
"connect_swarms_delay": "7s",
"proxy_read_timeout": "10m0s",
"proxy_read_header_timeout": "5s",
"proxy_write_timeout": "10m0s",
"proxy_idle_timeout": "1m0s"
}
},
"monitor": {
"monbasic": {
"check_interval": "15s"
}
},
"informer": {
"disk": {
"metric_ttl": "30s",
"metric_type": "freespace"
},
"numpin": {
"metric_ttl": "10s"
}
}
}
```
This new format aims to be easily extensible per component. As such,
it already surfaces quite a few new options which were hardcoded
before.
Additionally, since Go API have changed, some redundant methods have been
removed and small refactoring has happened to take advantage of the new
way.
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>
2017-10-11 18:23:03 +00:00
|
|
|
DefaultIdleTimeout = 120 * time.Second
|
2019-03-07 05:28:06 +00:00
|
|
|
DefaultMaxHeaderBytes = minMaxHeaderBytes
|
Issue #162: Rework configuration format
The following commit reimplements ipfs-cluster configuration under
the following premises:
* Each component is initialized with a configuration object
defined by its module
* Each component decides how the JSON representation of its
configuration looks like
* Each component parses and validates its own configuration
* Each component exposes its own defaults
* Component configurations are make the sections of a
central JSON configuration file (which replaces the current
JSON format)
* Component configurations implement a common interface
(config.ComponentConfig) with a set of common operations
* The central configuration file is managed by a
config.ConfigManager which:
* Registers ComponentConfigs
* Assigns the correspondent sections from the JSON file to each
component and delegates the parsing
* Delegates the JSON generation for each section
* Can be notified when the configuration is updated and must be
saved to disk
The new service.json would then look as follows:
```json
{
"cluster": {
"id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2",
"private_key": "<...>",
"secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786",
"peers": [],
"bootstrap": [],
"leave_on_shutdown": false,
"listen_multiaddress": "/ip4/0.0.0.0/tcp/9096",
"state_sync_interval": "1m0s",
"ipfs_sync_interval": "2m10s",
"replication_factor": -1,
"monitor_ping_interval": "15s"
},
"consensus": {
"raft": {
"heartbeat_timeout": "1s",
"election_timeout": "1s",
"commit_timeout": "50ms",
"max_append_entries": 64,
"trailing_logs": 10240,
"snapshot_interval": "2m0s",
"snapshot_threshold": 8192,
"leader_lease_timeout": "500ms"
}
},
"api": {
"restapi": {
"listen_multiaddress": "/ip4/127.0.0.1/tcp/9094",
"read_timeout": "30s",
"read_header_timeout": "5s",
"write_timeout": "1m0s",
"idle_timeout": "2m0s"
}
},
"ipfs_connector": {
"ipfshttp": {
"proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095",
"node_multiaddress": "/ip4/127.0.0.1/tcp/5001",
"connect_swarms_delay": "7s",
"proxy_read_timeout": "10m0s",
"proxy_read_header_timeout": "5s",
"proxy_write_timeout": "10m0s",
"proxy_idle_timeout": "1m0s"
}
},
"monitor": {
"monbasic": {
"check_interval": "15s"
}
},
"informer": {
"disk": {
"metric_ttl": "30s",
"metric_type": "freespace"
},
"numpin": {
"metric_ttl": "10s"
}
}
}
```
This new format aims to be easily extensible per component. As such,
it already surfaces quite a few new options which were hardcoded
before.
Additionally, since Go API have changed, some redundant methods have been
removed and small refactoring has happened to take advantage of the new
way.
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>
2017-10-11 18:23:03 +00:00
|
|
|
)
|
|
|
|
|
2018-10-16 13:23:06 +00:00
|
|
|
// These are the default values for Config.
|
|
|
|
var (
|
2019-01-11 11:36:25 +00:00
|
|
|
DefaultHeaders = map[string][]string{}
|
|
|
|
)
|
|
|
|
|
|
|
|
// CORS defaults
|
|
|
|
var (
|
|
|
|
DefaultCORSAllowedOrigins = []string{"*"}
|
2019-01-11 12:25:21 +00:00
|
|
|
DefaultCORSAllowedMethods = []string{
|
|
|
|
http.MethodGet,
|
|
|
|
}
|
|
|
|
// rs/cors this will set sensible defaults when empty:
|
|
|
|
// {"Origin", "Accept", "Content-Type", "X-Requested-With"}
|
2019-01-11 11:36:25 +00:00
|
|
|
DefaultCORSAllowedHeaders = []string{}
|
|
|
|
DefaultCORSExposedHeaders = []string{
|
|
|
|
"Content-Type",
|
|
|
|
"X-Stream-Output",
|
|
|
|
"X-Chunked-Output",
|
|
|
|
"X-Content-Length",
|
2018-10-16 13:23:06 +00:00
|
|
|
}
|
2019-01-11 12:40:07 +00:00
|
|
|
DefaultCORSAllowCredentials = true
|
|
|
|
DefaultCORSMaxAge time.Duration // 0. Means always.
|
2018-10-16 13:23:06 +00:00
|
|
|
)
|
|
|
|
|
Issue #162: Rework configuration format
The following commit reimplements ipfs-cluster configuration under
the following premises:
* Each component is initialized with a configuration object
defined by its module
* Each component decides how the JSON representation of its
configuration looks like
* Each component parses and validates its own configuration
* Each component exposes its own defaults
* Component configurations are make the sections of a
central JSON configuration file (which replaces the current
JSON format)
* Component configurations implement a common interface
(config.ComponentConfig) with a set of common operations
* The central configuration file is managed by a
config.ConfigManager which:
* Registers ComponentConfigs
* Assigns the correspondent sections from the JSON file to each
component and delegates the parsing
* Delegates the JSON generation for each section
* Can be notified when the configuration is updated and must be
saved to disk
The new service.json would then look as follows:
```json
{
"cluster": {
"id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2",
"private_key": "<...>",
"secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786",
"peers": [],
"bootstrap": [],
"leave_on_shutdown": false,
"listen_multiaddress": "/ip4/0.0.0.0/tcp/9096",
"state_sync_interval": "1m0s",
"ipfs_sync_interval": "2m10s",
"replication_factor": -1,
"monitor_ping_interval": "15s"
},
"consensus": {
"raft": {
"heartbeat_timeout": "1s",
"election_timeout": "1s",
"commit_timeout": "50ms",
"max_append_entries": 64,
"trailing_logs": 10240,
"snapshot_interval": "2m0s",
"snapshot_threshold": 8192,
"leader_lease_timeout": "500ms"
}
},
"api": {
"restapi": {
"listen_multiaddress": "/ip4/127.0.0.1/tcp/9094",
"read_timeout": "30s",
"read_header_timeout": "5s",
"write_timeout": "1m0s",
"idle_timeout": "2m0s"
}
},
"ipfs_connector": {
"ipfshttp": {
"proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095",
"node_multiaddress": "/ip4/127.0.0.1/tcp/5001",
"connect_swarms_delay": "7s",
"proxy_read_timeout": "10m0s",
"proxy_read_header_timeout": "5s",
"proxy_write_timeout": "10m0s",
"proxy_idle_timeout": "1m0s"
}
},
"monitor": {
"monbasic": {
"check_interval": "15s"
}
},
"informer": {
"disk": {
"metric_ttl": "30s",
"metric_type": "freespace"
},
"numpin": {
"metric_ttl": "10s"
}
}
}
```
This new format aims to be easily extensible per component. As such,
it already surfaces quite a few new options which were hardcoded
before.
Additionally, since Go API have changed, some redundant methods have been
removed and small refactoring has happened to take advantage of the new
way.
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>
2017-10-11 18:23:03 +00:00
|
|
|
// Config is used to intialize the API object and allows to
|
|
|
|
// customize the behaviour of it. It implements the config.ComponentConfig
|
|
|
|
// interface.
|
|
|
|
type Config struct {
|
|
|
|
config.Saver
|
|
|
|
|
2018-03-14 20:59:28 +00:00
|
|
|
// Listen address for the HTTP REST API endpoint.
|
2020-02-28 16:16:16 +00:00
|
|
|
HTTPListenAddr []ma.Multiaddr
|
Issue #162: Rework configuration format
The following commit reimplements ipfs-cluster configuration under
the following premises:
* Each component is initialized with a configuration object
defined by its module
* Each component decides how the JSON representation of its
configuration looks like
* Each component parses and validates its own configuration
* Each component exposes its own defaults
* Component configurations are make the sections of a
central JSON configuration file (which replaces the current
JSON format)
* Component configurations implement a common interface
(config.ComponentConfig) with a set of common operations
* The central configuration file is managed by a
config.ConfigManager which:
* Registers ComponentConfigs
* Assigns the correspondent sections from the JSON file to each
component and delegates the parsing
* Delegates the JSON generation for each section
* Can be notified when the configuration is updated and must be
saved to disk
The new service.json would then look as follows:
```json
{
"cluster": {
"id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2",
"private_key": "<...>",
"secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786",
"peers": [],
"bootstrap": [],
"leave_on_shutdown": false,
"listen_multiaddress": "/ip4/0.0.0.0/tcp/9096",
"state_sync_interval": "1m0s",
"ipfs_sync_interval": "2m10s",
"replication_factor": -1,
"monitor_ping_interval": "15s"
},
"consensus": {
"raft": {
"heartbeat_timeout": "1s",
"election_timeout": "1s",
"commit_timeout": "50ms",
"max_append_entries": 64,
"trailing_logs": 10240,
"snapshot_interval": "2m0s",
"snapshot_threshold": 8192,
"leader_lease_timeout": "500ms"
}
},
"api": {
"restapi": {
"listen_multiaddress": "/ip4/127.0.0.1/tcp/9094",
"read_timeout": "30s",
"read_header_timeout": "5s",
"write_timeout": "1m0s",
"idle_timeout": "2m0s"
}
},
"ipfs_connector": {
"ipfshttp": {
"proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095",
"node_multiaddress": "/ip4/127.0.0.1/tcp/5001",
"connect_swarms_delay": "7s",
"proxy_read_timeout": "10m0s",
"proxy_read_header_timeout": "5s",
"proxy_write_timeout": "10m0s",
"proxy_idle_timeout": "1m0s"
}
},
"monitor": {
"monbasic": {
"check_interval": "15s"
}
},
"informer": {
"disk": {
"metric_ttl": "30s",
"metric_type": "freespace"
},
"numpin": {
"metric_ttl": "10s"
}
}
}
```
This new format aims to be easily extensible per component. As such,
it already surfaces quite a few new options which were hardcoded
before.
Additionally, since Go API have changed, some redundant methods have been
removed and small refactoring has happened to take advantage of the new
way.
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>
2017-10-11 18:23:03 +00:00
|
|
|
|
|
|
|
// TLS configuration for the HTTP listener
|
|
|
|
TLS *tls.Config
|
|
|
|
|
2018-03-14 20:59:28 +00:00
|
|
|
// pathSSLCertFile is a path to a certificate file used to secure the
|
|
|
|
// HTTP API endpoint. We track it so we can write it in the JSON.
|
Issue #162: Rework configuration format
The following commit reimplements ipfs-cluster configuration under
the following premises:
* Each component is initialized with a configuration object
defined by its module
* Each component decides how the JSON representation of its
configuration looks like
* Each component parses and validates its own configuration
* Each component exposes its own defaults
* Component configurations are make the sections of a
central JSON configuration file (which replaces the current
JSON format)
* Component configurations implement a common interface
(config.ComponentConfig) with a set of common operations
* The central configuration file is managed by a
config.ConfigManager which:
* Registers ComponentConfigs
* Assigns the correspondent sections from the JSON file to each
component and delegates the parsing
* Delegates the JSON generation for each section
* Can be notified when the configuration is updated and must be
saved to disk
The new service.json would then look as follows:
```json
{
"cluster": {
"id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2",
"private_key": "<...>",
"secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786",
"peers": [],
"bootstrap": [],
"leave_on_shutdown": false,
"listen_multiaddress": "/ip4/0.0.0.0/tcp/9096",
"state_sync_interval": "1m0s",
"ipfs_sync_interval": "2m10s",
"replication_factor": -1,
"monitor_ping_interval": "15s"
},
"consensus": {
"raft": {
"heartbeat_timeout": "1s",
"election_timeout": "1s",
"commit_timeout": "50ms",
"max_append_entries": 64,
"trailing_logs": 10240,
"snapshot_interval": "2m0s",
"snapshot_threshold": 8192,
"leader_lease_timeout": "500ms"
}
},
"api": {
"restapi": {
"listen_multiaddress": "/ip4/127.0.0.1/tcp/9094",
"read_timeout": "30s",
"read_header_timeout": "5s",
"write_timeout": "1m0s",
"idle_timeout": "2m0s"
}
},
"ipfs_connector": {
"ipfshttp": {
"proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095",
"node_multiaddress": "/ip4/127.0.0.1/tcp/5001",
"connect_swarms_delay": "7s",
"proxy_read_timeout": "10m0s",
"proxy_read_header_timeout": "5s",
"proxy_write_timeout": "10m0s",
"proxy_idle_timeout": "1m0s"
}
},
"monitor": {
"monbasic": {
"check_interval": "15s"
}
},
"informer": {
"disk": {
"metric_ttl": "30s",
"metric_type": "freespace"
},
"numpin": {
"metric_ttl": "10s"
}
}
}
```
This new format aims to be easily extensible per component. As such,
it already surfaces quite a few new options which were hardcoded
before.
Additionally, since Go API have changed, some redundant methods have been
removed and small refactoring has happened to take advantage of the new
way.
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>
2017-10-11 18:23:03 +00:00
|
|
|
pathSSLCertFile string
|
|
|
|
|
2018-03-14 20:59:28 +00:00
|
|
|
// pathSSLKeyFile is a path to the private key corresponding to the
|
|
|
|
// SSLKeyFile. We track it so we can write it in the JSON.
|
Issue #162: Rework configuration format
The following commit reimplements ipfs-cluster configuration under
the following premises:
* Each component is initialized with a configuration object
defined by its module
* Each component decides how the JSON representation of its
configuration looks like
* Each component parses and validates its own configuration
* Each component exposes its own defaults
* Component configurations are make the sections of a
central JSON configuration file (which replaces the current
JSON format)
* Component configurations implement a common interface
(config.ComponentConfig) with a set of common operations
* The central configuration file is managed by a
config.ConfigManager which:
* Registers ComponentConfigs
* Assigns the correspondent sections from the JSON file to each
component and delegates the parsing
* Delegates the JSON generation for each section
* Can be notified when the configuration is updated and must be
saved to disk
The new service.json would then look as follows:
```json
{
"cluster": {
"id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2",
"private_key": "<...>",
"secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786",
"peers": [],
"bootstrap": [],
"leave_on_shutdown": false,
"listen_multiaddress": "/ip4/0.0.0.0/tcp/9096",
"state_sync_interval": "1m0s",
"ipfs_sync_interval": "2m10s",
"replication_factor": -1,
"monitor_ping_interval": "15s"
},
"consensus": {
"raft": {
"heartbeat_timeout": "1s",
"election_timeout": "1s",
"commit_timeout": "50ms",
"max_append_entries": 64,
"trailing_logs": 10240,
"snapshot_interval": "2m0s",
"snapshot_threshold": 8192,
"leader_lease_timeout": "500ms"
}
},
"api": {
"restapi": {
"listen_multiaddress": "/ip4/127.0.0.1/tcp/9094",
"read_timeout": "30s",
"read_header_timeout": "5s",
"write_timeout": "1m0s",
"idle_timeout": "2m0s"
}
},
"ipfs_connector": {
"ipfshttp": {
"proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095",
"node_multiaddress": "/ip4/127.0.0.1/tcp/5001",
"connect_swarms_delay": "7s",
"proxy_read_timeout": "10m0s",
"proxy_read_header_timeout": "5s",
"proxy_write_timeout": "10m0s",
"proxy_idle_timeout": "1m0s"
}
},
"monitor": {
"monbasic": {
"check_interval": "15s"
}
},
"informer": {
"disk": {
"metric_ttl": "30s",
"metric_type": "freespace"
},
"numpin": {
"metric_ttl": "10s"
}
}
}
```
This new format aims to be easily extensible per component. As such,
it already surfaces quite a few new options which were hardcoded
before.
Additionally, since Go API have changed, some redundant methods have been
removed and small refactoring has happened to take advantage of the new
way.
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>
2017-10-11 18:23:03 +00:00
|
|
|
pathSSLKeyFile string
|
|
|
|
|
|
|
|
// Maximum duration before timing out reading a full request
|
|
|
|
ReadTimeout time.Duration
|
|
|
|
|
|
|
|
// Maximum duration before timing out reading the headers of a request
|
|
|
|
ReadHeaderTimeout time.Duration
|
|
|
|
|
|
|
|
// Maximum duration before timing out write of the response
|
|
|
|
WriteTimeout time.Duration
|
|
|
|
|
|
|
|
// Server-side amount of time a Keep-Alive connection will be
|
|
|
|
// kept idle before being reused
|
|
|
|
IdleTimeout time.Duration
|
|
|
|
|
2019-03-07 05:28:06 +00:00
|
|
|
// Maximum cumulative size of HTTP request headers in bytes
|
|
|
|
// accepted by the server
|
|
|
|
MaxHeaderBytes int
|
|
|
|
|
2018-03-14 20:59:28 +00:00
|
|
|
// Listen address for the Libp2p REST API endpoint.
|
2020-02-28 16:16:16 +00:00
|
|
|
Libp2pListenAddr []ma.Multiaddr
|
2018-03-14 20:59:28 +00:00
|
|
|
|
|
|
|
// ID and PrivateKey are used to create a libp2p host if we
|
|
|
|
// want the API component to do it (not by default).
|
|
|
|
ID peer.ID
|
|
|
|
PrivateKey crypto.PrivKey
|
|
|
|
|
2019-07-15 12:17:35 +00:00
|
|
|
// BasicAuthCredentials is a map of username-password pairs
|
Issue #162: Rework configuration format
The following commit reimplements ipfs-cluster configuration under
the following premises:
* Each component is initialized with a configuration object
defined by its module
* Each component decides how the JSON representation of its
configuration looks like
* Each component parses and validates its own configuration
* Each component exposes its own defaults
* Component configurations are make the sections of a
central JSON configuration file (which replaces the current
JSON format)
* Component configurations implement a common interface
(config.ComponentConfig) with a set of common operations
* The central configuration file is managed by a
config.ConfigManager which:
* Registers ComponentConfigs
* Assigns the correspondent sections from the JSON file to each
component and delegates the parsing
* Delegates the JSON generation for each section
* Can be notified when the configuration is updated and must be
saved to disk
The new service.json would then look as follows:
```json
{
"cluster": {
"id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2",
"private_key": "<...>",
"secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786",
"peers": [],
"bootstrap": [],
"leave_on_shutdown": false,
"listen_multiaddress": "/ip4/0.0.0.0/tcp/9096",
"state_sync_interval": "1m0s",
"ipfs_sync_interval": "2m10s",
"replication_factor": -1,
"monitor_ping_interval": "15s"
},
"consensus": {
"raft": {
"heartbeat_timeout": "1s",
"election_timeout": "1s",
"commit_timeout": "50ms",
"max_append_entries": 64,
"trailing_logs": 10240,
"snapshot_interval": "2m0s",
"snapshot_threshold": 8192,
"leader_lease_timeout": "500ms"
}
},
"api": {
"restapi": {
"listen_multiaddress": "/ip4/127.0.0.1/tcp/9094",
"read_timeout": "30s",
"read_header_timeout": "5s",
"write_timeout": "1m0s",
"idle_timeout": "2m0s"
}
},
"ipfs_connector": {
"ipfshttp": {
"proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095",
"node_multiaddress": "/ip4/127.0.0.1/tcp/5001",
"connect_swarms_delay": "7s",
"proxy_read_timeout": "10m0s",
"proxy_read_header_timeout": "5s",
"proxy_write_timeout": "10m0s",
"proxy_idle_timeout": "1m0s"
}
},
"monitor": {
"monbasic": {
"check_interval": "15s"
}
},
"informer": {
"disk": {
"metric_ttl": "30s",
"metric_type": "freespace"
},
"numpin": {
"metric_ttl": "10s"
}
}
}
```
This new format aims to be easily extensible per component. As such,
it already surfaces quite a few new options which were hardcoded
before.
Additionally, since Go API have changed, some redundant methods have been
removed and small refactoring has happened to take advantage of the new
way.
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>
2017-10-11 18:23:03 +00:00
|
|
|
// which are authorized to use Basic Authentication
|
2019-07-15 12:17:35 +00:00
|
|
|
BasicAuthCredentials map[string]string
|
2018-10-16 13:23:06 +00:00
|
|
|
|
2019-08-28 16:43:23 +00:00
|
|
|
// HTTPLogFile is path of the file that would save HTTP API logs. If this
|
|
|
|
// path is empty, HTTP logs would be sent to standard output. This path
|
|
|
|
// should either be absolute or relative to cluster base directory. Its
|
|
|
|
// default value is empty.
|
|
|
|
HTTPLogFile string
|
|
|
|
|
2018-10-16 13:23:06 +00:00
|
|
|
// Headers provides customization for the headers returned
|
2019-01-11 11:36:25 +00:00
|
|
|
// by the API on existing routes.
|
2018-10-16 13:23:06 +00:00
|
|
|
Headers map[string][]string
|
2019-01-11 11:36:25 +00:00
|
|
|
|
|
|
|
// CORS header management
|
|
|
|
CORSAllowedOrigins []string
|
|
|
|
CORSAllowedMethods []string
|
|
|
|
CORSAllowedHeaders []string
|
|
|
|
CORSExposedHeaders []string
|
|
|
|
CORSAllowCredentials bool
|
|
|
|
CORSMaxAge time.Duration
|
2018-06-27 04:03:15 +00:00
|
|
|
|
|
|
|
// Tracing flag used to skip tracing specific paths when not enabled.
|
|
|
|
Tracing bool
|
Issue #162: Rework configuration format
The following commit reimplements ipfs-cluster configuration under
the following premises:
* Each component is initialized with a configuration object
defined by its module
* Each component decides how the JSON representation of its
configuration looks like
* Each component parses and validates its own configuration
* Each component exposes its own defaults
* Component configurations are make the sections of a
central JSON configuration file (which replaces the current
JSON format)
* Component configurations implement a common interface
(config.ComponentConfig) with a set of common operations
* The central configuration file is managed by a
config.ConfigManager which:
* Registers ComponentConfigs
* Assigns the correspondent sections from the JSON file to each
component and delegates the parsing
* Delegates the JSON generation for each section
* Can be notified when the configuration is updated and must be
saved to disk
The new service.json would then look as follows:
```json
{
"cluster": {
"id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2",
"private_key": "<...>",
"secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786",
"peers": [],
"bootstrap": [],
"leave_on_shutdown": false,
"listen_multiaddress": "/ip4/0.0.0.0/tcp/9096",
"state_sync_interval": "1m0s",
"ipfs_sync_interval": "2m10s",
"replication_factor": -1,
"monitor_ping_interval": "15s"
},
"consensus": {
"raft": {
"heartbeat_timeout": "1s",
"election_timeout": "1s",
"commit_timeout": "50ms",
"max_append_entries": 64,
"trailing_logs": 10240,
"snapshot_interval": "2m0s",
"snapshot_threshold": 8192,
"leader_lease_timeout": "500ms"
}
},
"api": {
"restapi": {
"listen_multiaddress": "/ip4/127.0.0.1/tcp/9094",
"read_timeout": "30s",
"read_header_timeout": "5s",
"write_timeout": "1m0s",
"idle_timeout": "2m0s"
}
},
"ipfs_connector": {
"ipfshttp": {
"proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095",
"node_multiaddress": "/ip4/127.0.0.1/tcp/5001",
"connect_swarms_delay": "7s",
"proxy_read_timeout": "10m0s",
"proxy_read_header_timeout": "5s",
"proxy_write_timeout": "10m0s",
"proxy_idle_timeout": "1m0s"
}
},
"monitor": {
"monbasic": {
"check_interval": "15s"
}
},
"informer": {
"disk": {
"metric_ttl": "30s",
"metric_type": "freespace"
},
"numpin": {
"metric_ttl": "10s"
}
}
}
```
This new format aims to be easily extensible per component. As such,
it already surfaces quite a few new options which were hardcoded
before.
Additionally, since Go API have changed, some redundant methods have been
removed and small refactoring has happened to take advantage of the new
way.
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>
2017-10-11 18:23:03 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
type jsonConfig struct {
|
2020-02-28 16:16:16 +00:00
|
|
|
HTTPListenMultiaddress ipfsconfig.Strings `json:"http_listen_multiaddress"`
|
|
|
|
SSLCertFile string `json:"ssl_cert_file,omitempty"`
|
|
|
|
SSLKeyFile string `json:"ssl_key_file,omitempty"`
|
|
|
|
ReadTimeout string `json:"read_timeout"`
|
|
|
|
ReadHeaderTimeout string `json:"read_header_timeout"`
|
|
|
|
WriteTimeout string `json:"write_timeout"`
|
|
|
|
IdleTimeout string `json:"idle_timeout"`
|
|
|
|
MaxHeaderBytes int `json:"max_header_bytes"`
|
|
|
|
|
|
|
|
Libp2pListenMultiaddress ipfsconfig.Strings `json:"libp2p_listen_multiaddress,omitempty"`
|
|
|
|
ID string `json:"id,omitempty"`
|
|
|
|
PrivateKey string `json:"private_key,omitempty"`
|
2018-03-14 20:59:28 +00:00
|
|
|
|
2019-07-15 12:17:35 +00:00
|
|
|
BasicAuthCredentials map[string]string `json:"basic_auth_credentials"`
|
2019-08-28 16:43:23 +00:00
|
|
|
HTTPLogFile string `json:"http_log_file"`
|
2019-07-15 12:17:35 +00:00
|
|
|
Headers map[string][]string `json:"headers"`
|
2019-01-11 11:36:25 +00:00
|
|
|
|
|
|
|
CORSAllowedOrigins []string `json:"cors_allowed_origins"`
|
|
|
|
CORSAllowedMethods []string `json:"cors_allowed_methods"`
|
|
|
|
CORSAllowedHeaders []string `json:"cors_allowed_headers"`
|
|
|
|
CORSExposedHeaders []string `json:"cors_exposed_headers"`
|
|
|
|
CORSAllowCredentials bool `json:"cors_allow_credentials"`
|
|
|
|
CORSMaxAge string `json:"cors_max_age"`
|
2019-08-21 15:25:41 +00:00
|
|
|
}
|
|
|
|
|
2019-08-28 16:43:23 +00:00
|
|
|
// getHTTPLogPath gets full path of the file where http logs should be
|
2019-08-21 15:25:41 +00:00
|
|
|
// saved.
|
2019-08-28 16:43:23 +00:00
|
|
|
func (cfg *Config) getHTTPLogPath() string {
|
2019-08-27 09:11:15 +00:00
|
|
|
if filepath.IsAbs(cfg.HTTPLogFile) {
|
|
|
|
return cfg.HTTPLogFile
|
|
|
|
}
|
|
|
|
|
2019-08-21 15:25:41 +00:00
|
|
|
if cfg.BaseDir == "" {
|
|
|
|
return ""
|
|
|
|
}
|
|
|
|
|
2019-08-27 09:11:15 +00:00
|
|
|
return filepath.Join(cfg.BaseDir, cfg.HTTPLogFile)
|
Issue #162: Rework configuration format
The following commit reimplements ipfs-cluster configuration under
the following premises:
* Each component is initialized with a configuration object
defined by its module
* Each component decides how the JSON representation of its
configuration looks like
* Each component parses and validates its own configuration
* Each component exposes its own defaults
* Component configurations are make the sections of a
central JSON configuration file (which replaces the current
JSON format)
* Component configurations implement a common interface
(config.ComponentConfig) with a set of common operations
* The central configuration file is managed by a
config.ConfigManager which:
* Registers ComponentConfigs
* Assigns the correspondent sections from the JSON file to each
component and delegates the parsing
* Delegates the JSON generation for each section
* Can be notified when the configuration is updated and must be
saved to disk
The new service.json would then look as follows:
```json
{
"cluster": {
"id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2",
"private_key": "<...>",
"secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786",
"peers": [],
"bootstrap": [],
"leave_on_shutdown": false,
"listen_multiaddress": "/ip4/0.0.0.0/tcp/9096",
"state_sync_interval": "1m0s",
"ipfs_sync_interval": "2m10s",
"replication_factor": -1,
"monitor_ping_interval": "15s"
},
"consensus": {
"raft": {
"heartbeat_timeout": "1s",
"election_timeout": "1s",
"commit_timeout": "50ms",
"max_append_entries": 64,
"trailing_logs": 10240,
"snapshot_interval": "2m0s",
"snapshot_threshold": 8192,
"leader_lease_timeout": "500ms"
}
},
"api": {
"restapi": {
"listen_multiaddress": "/ip4/127.0.0.1/tcp/9094",
"read_timeout": "30s",
"read_header_timeout": "5s",
"write_timeout": "1m0s",
"idle_timeout": "2m0s"
}
},
"ipfs_connector": {
"ipfshttp": {
"proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095",
"node_multiaddress": "/ip4/127.0.0.1/tcp/5001",
"connect_swarms_delay": "7s",
"proxy_read_timeout": "10m0s",
"proxy_read_header_timeout": "5s",
"proxy_write_timeout": "10m0s",
"proxy_idle_timeout": "1m0s"
}
},
"monitor": {
"monbasic": {
"check_interval": "15s"
}
},
"informer": {
"disk": {
"metric_ttl": "30s",
"metric_type": "freespace"
},
"numpin": {
"metric_ttl": "10s"
}
}
}
```
This new format aims to be easily extensible per component. As such,
it already surfaces quite a few new options which were hardcoded
before.
Additionally, since Go API have changed, some redundant methods have been
removed and small refactoring has happened to take advantage of the new
way.
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>
2017-10-11 18:23:03 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
// ConfigKey returns a human-friendly identifier for this type of
|
|
|
|
// Config.
|
|
|
|
func (cfg *Config) ConfigKey() string {
|
|
|
|
return configKey
|
|
|
|
}
|
|
|
|
|
|
|
|
// Default initializes this Config with working values.
|
|
|
|
func (cfg *Config) Default() error {
|
2018-03-14 20:59:28 +00:00
|
|
|
// http
|
2020-02-28 16:16:16 +00:00
|
|
|
addrs := make([]ma.Multiaddr, 0, len(DefaultHTTPListenAddrs))
|
|
|
|
for _, def := range DefaultHTTPListenAddrs {
|
|
|
|
httpListen, err := ma.NewMultiaddr(def)
|
|
|
|
if err != nil {
|
|
|
|
return err
|
|
|
|
}
|
|
|
|
addrs = append(addrs, httpListen)
|
|
|
|
}
|
|
|
|
cfg.HTTPListenAddr = addrs
|
Issue #162: Rework configuration format
The following commit reimplements ipfs-cluster configuration under
the following premises:
* Each component is initialized with a configuration object
defined by its module
* Each component decides how the JSON representation of its
configuration looks like
* Each component parses and validates its own configuration
* Each component exposes its own defaults
* Component configurations are make the sections of a
central JSON configuration file (which replaces the current
JSON format)
* Component configurations implement a common interface
(config.ComponentConfig) with a set of common operations
* The central configuration file is managed by a
config.ConfigManager which:
* Registers ComponentConfigs
* Assigns the correspondent sections from the JSON file to each
component and delegates the parsing
* Delegates the JSON generation for each section
* Can be notified when the configuration is updated and must be
saved to disk
The new service.json would then look as follows:
```json
{
"cluster": {
"id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2",
"private_key": "<...>",
"secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786",
"peers": [],
"bootstrap": [],
"leave_on_shutdown": false,
"listen_multiaddress": "/ip4/0.0.0.0/tcp/9096",
"state_sync_interval": "1m0s",
"ipfs_sync_interval": "2m10s",
"replication_factor": -1,
"monitor_ping_interval": "15s"
},
"consensus": {
"raft": {
"heartbeat_timeout": "1s",
"election_timeout": "1s",
"commit_timeout": "50ms",
"max_append_entries": 64,
"trailing_logs": 10240,
"snapshot_interval": "2m0s",
"snapshot_threshold": 8192,
"leader_lease_timeout": "500ms"
}
},
"api": {
"restapi": {
"listen_multiaddress": "/ip4/127.0.0.1/tcp/9094",
"read_timeout": "30s",
"read_header_timeout": "5s",
"write_timeout": "1m0s",
"idle_timeout": "2m0s"
}
},
"ipfs_connector": {
"ipfshttp": {
"proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095",
"node_multiaddress": "/ip4/127.0.0.1/tcp/5001",
"connect_swarms_delay": "7s",
"proxy_read_timeout": "10m0s",
"proxy_read_header_timeout": "5s",
"proxy_write_timeout": "10m0s",
"proxy_idle_timeout": "1m0s"
}
},
"monitor": {
"monbasic": {
"check_interval": "15s"
}
},
"informer": {
"disk": {
"metric_ttl": "30s",
"metric_type": "freespace"
},
"numpin": {
"metric_ttl": "10s"
}
}
}
```
This new format aims to be easily extensible per component. As such,
it already surfaces quite a few new options which were hardcoded
before.
Additionally, since Go API have changed, some redundant methods have been
removed and small refactoring has happened to take advantage of the new
way.
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>
2017-10-11 18:23:03 +00:00
|
|
|
cfg.pathSSLCertFile = ""
|
|
|
|
cfg.pathSSLKeyFile = ""
|
|
|
|
cfg.ReadTimeout = DefaultReadTimeout
|
|
|
|
cfg.ReadHeaderTimeout = DefaultReadHeaderTimeout
|
|
|
|
cfg.WriteTimeout = DefaultWriteTimeout
|
|
|
|
cfg.IdleTimeout = DefaultIdleTimeout
|
2019-03-07 05:28:06 +00:00
|
|
|
cfg.MaxHeaderBytes = DefaultMaxHeaderBytes
|
2018-03-14 20:59:28 +00:00
|
|
|
|
|
|
|
// libp2p
|
|
|
|
cfg.ID = ""
|
|
|
|
cfg.PrivateKey = nil
|
|
|
|
cfg.Libp2pListenAddr = nil
|
|
|
|
|
|
|
|
// Auth
|
2019-07-15 12:17:35 +00:00
|
|
|
cfg.BasicAuthCredentials = nil
|
Issue #162: Rework configuration format
The following commit reimplements ipfs-cluster configuration under
the following premises:
* Each component is initialized with a configuration object
defined by its module
* Each component decides how the JSON representation of its
configuration looks like
* Each component parses and validates its own configuration
* Each component exposes its own defaults
* Component configurations are make the sections of a
central JSON configuration file (which replaces the current
JSON format)
* Component configurations implement a common interface
(config.ComponentConfig) with a set of common operations
* The central configuration file is managed by a
config.ConfigManager which:
* Registers ComponentConfigs
* Assigns the correspondent sections from the JSON file to each
component and delegates the parsing
* Delegates the JSON generation for each section
* Can be notified when the configuration is updated and must be
saved to disk
The new service.json would then look as follows:
```json
{
"cluster": {
"id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2",
"private_key": "<...>",
"secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786",
"peers": [],
"bootstrap": [],
"leave_on_shutdown": false,
"listen_multiaddress": "/ip4/0.0.0.0/tcp/9096",
"state_sync_interval": "1m0s",
"ipfs_sync_interval": "2m10s",
"replication_factor": -1,
"monitor_ping_interval": "15s"
},
"consensus": {
"raft": {
"heartbeat_timeout": "1s",
"election_timeout": "1s",
"commit_timeout": "50ms",
"max_append_entries": 64,
"trailing_logs": 10240,
"snapshot_interval": "2m0s",
"snapshot_threshold": 8192,
"leader_lease_timeout": "500ms"
}
},
"api": {
"restapi": {
"listen_multiaddress": "/ip4/127.0.0.1/tcp/9094",
"read_timeout": "30s",
"read_header_timeout": "5s",
"write_timeout": "1m0s",
"idle_timeout": "2m0s"
}
},
"ipfs_connector": {
"ipfshttp": {
"proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095",
"node_multiaddress": "/ip4/127.0.0.1/tcp/5001",
"connect_swarms_delay": "7s",
"proxy_read_timeout": "10m0s",
"proxy_read_header_timeout": "5s",
"proxy_write_timeout": "10m0s",
"proxy_idle_timeout": "1m0s"
}
},
"monitor": {
"monbasic": {
"check_interval": "15s"
}
},
"informer": {
"disk": {
"metric_ttl": "30s",
"metric_type": "freespace"
},
"numpin": {
"metric_ttl": "10s"
}
}
}
```
This new format aims to be easily extensible per component. As such,
it already surfaces quite a few new options which were hardcoded
before.
Additionally, since Go API have changed, some redundant methods have been
removed and small refactoring has happened to take advantage of the new
way.
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>
2017-10-11 18:23:03 +00:00
|
|
|
|
2019-08-28 16:43:23 +00:00
|
|
|
// Logs
|
|
|
|
cfg.HTTPLogFile = ""
|
|
|
|
|
2018-10-16 13:23:06 +00:00
|
|
|
// Headers
|
|
|
|
cfg.Headers = DefaultHeaders
|
|
|
|
|
2019-01-11 11:36:25 +00:00
|
|
|
cfg.CORSAllowedOrigins = DefaultCORSAllowedOrigins
|
|
|
|
cfg.CORSAllowedMethods = DefaultCORSAllowedMethods
|
|
|
|
cfg.CORSAllowedHeaders = DefaultCORSAllowedHeaders
|
|
|
|
cfg.CORSExposedHeaders = DefaultCORSExposedHeaders
|
|
|
|
cfg.CORSAllowCredentials = DefaultCORSAllowCredentials
|
|
|
|
cfg.CORSMaxAge = DefaultCORSMaxAge
|
2019-08-28 16:43:23 +00:00
|
|
|
|
Issue #162: Rework configuration format
The following commit reimplements ipfs-cluster configuration under
the following premises:
* Each component is initialized with a configuration object
defined by its module
* Each component decides how the JSON representation of its
configuration looks like
* Each component parses and validates its own configuration
* Each component exposes its own defaults
* Component configurations are make the sections of a
central JSON configuration file (which replaces the current
JSON format)
* Component configurations implement a common interface
(config.ComponentConfig) with a set of common operations
* The central configuration file is managed by a
config.ConfigManager which:
* Registers ComponentConfigs
* Assigns the correspondent sections from the JSON file to each
component and delegates the parsing
* Delegates the JSON generation for each section
* Can be notified when the configuration is updated and must be
saved to disk
The new service.json would then look as follows:
```json
{
"cluster": {
"id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2",
"private_key": "<...>",
"secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786",
"peers": [],
"bootstrap": [],
"leave_on_shutdown": false,
"listen_multiaddress": "/ip4/0.0.0.0/tcp/9096",
"state_sync_interval": "1m0s",
"ipfs_sync_interval": "2m10s",
"replication_factor": -1,
"monitor_ping_interval": "15s"
},
"consensus": {
"raft": {
"heartbeat_timeout": "1s",
"election_timeout": "1s",
"commit_timeout": "50ms",
"max_append_entries": 64,
"trailing_logs": 10240,
"snapshot_interval": "2m0s",
"snapshot_threshold": 8192,
"leader_lease_timeout": "500ms"
}
},
"api": {
"restapi": {
"listen_multiaddress": "/ip4/127.0.0.1/tcp/9094",
"read_timeout": "30s",
"read_header_timeout": "5s",
"write_timeout": "1m0s",
"idle_timeout": "2m0s"
}
},
"ipfs_connector": {
"ipfshttp": {
"proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095",
"node_multiaddress": "/ip4/127.0.0.1/tcp/5001",
"connect_swarms_delay": "7s",
"proxy_read_timeout": "10m0s",
"proxy_read_header_timeout": "5s",
"proxy_write_timeout": "10m0s",
"proxy_idle_timeout": "1m0s"
}
},
"monitor": {
"monbasic": {
"check_interval": "15s"
}
},
"informer": {
"disk": {
"metric_ttl": "30s",
"metric_type": "freespace"
},
"numpin": {
"metric_ttl": "10s"
}
}
}
```
This new format aims to be easily extensible per component. As such,
it already surfaces quite a few new options which were hardcoded
before.
Additionally, since Go API have changed, some redundant methods have been
removed and small refactoring has happened to take advantage of the new
way.
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>
2017-10-11 18:23:03 +00:00
|
|
|
return nil
|
|
|
|
}
|
|
|
|
|
2019-02-07 18:46:42 +00:00
|
|
|
// ApplyEnvVars fills in any Config fields found
|
|
|
|
// as environment variables.
|
|
|
|
func (cfg *Config) ApplyEnvVars() error {
|
2019-02-15 17:07:20 +00:00
|
|
|
jcfg, err := cfg.toJSONConfig()
|
|
|
|
if err != nil {
|
|
|
|
return err
|
|
|
|
}
|
2019-02-07 18:46:42 +00:00
|
|
|
|
2019-02-15 17:07:20 +00:00
|
|
|
err = envconfig.Process(envConfigKey, jcfg)
|
2019-02-07 18:46:42 +00:00
|
|
|
if err != nil {
|
|
|
|
return err
|
|
|
|
}
|
|
|
|
return cfg.applyJSONConfig(jcfg)
|
|
|
|
}
|
|
|
|
|
Issue #162: Rework configuration format
The following commit reimplements ipfs-cluster configuration under
the following premises:
* Each component is initialized with a configuration object
defined by its module
* Each component decides how the JSON representation of its
configuration looks like
* Each component parses and validates its own configuration
* Each component exposes its own defaults
* Component configurations are make the sections of a
central JSON configuration file (which replaces the current
JSON format)
* Component configurations implement a common interface
(config.ComponentConfig) with a set of common operations
* The central configuration file is managed by a
config.ConfigManager which:
* Registers ComponentConfigs
* Assigns the correspondent sections from the JSON file to each
component and delegates the parsing
* Delegates the JSON generation for each section
* Can be notified when the configuration is updated and must be
saved to disk
The new service.json would then look as follows:
```json
{
"cluster": {
"id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2",
"private_key": "<...>",
"secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786",
"peers": [],
"bootstrap": [],
"leave_on_shutdown": false,
"listen_multiaddress": "/ip4/0.0.0.0/tcp/9096",
"state_sync_interval": "1m0s",
"ipfs_sync_interval": "2m10s",
"replication_factor": -1,
"monitor_ping_interval": "15s"
},
"consensus": {
"raft": {
"heartbeat_timeout": "1s",
"election_timeout": "1s",
"commit_timeout": "50ms",
"max_append_entries": 64,
"trailing_logs": 10240,
"snapshot_interval": "2m0s",
"snapshot_threshold": 8192,
"leader_lease_timeout": "500ms"
}
},
"api": {
"restapi": {
"listen_multiaddress": "/ip4/127.0.0.1/tcp/9094",
"read_timeout": "30s",
"read_header_timeout": "5s",
"write_timeout": "1m0s",
"idle_timeout": "2m0s"
}
},
"ipfs_connector": {
"ipfshttp": {
"proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095",
"node_multiaddress": "/ip4/127.0.0.1/tcp/5001",
"connect_swarms_delay": "7s",
"proxy_read_timeout": "10m0s",
"proxy_read_header_timeout": "5s",
"proxy_write_timeout": "10m0s",
"proxy_idle_timeout": "1m0s"
}
},
"monitor": {
"monbasic": {
"check_interval": "15s"
}
},
"informer": {
"disk": {
"metric_ttl": "30s",
"metric_type": "freespace"
},
"numpin": {
"metric_ttl": "10s"
}
}
}
```
This new format aims to be easily extensible per component. As such,
it already surfaces quite a few new options which were hardcoded
before.
Additionally, since Go API have changed, some redundant methods have been
removed and small refactoring has happened to take advantage of the new
way.
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>
2017-10-11 18:23:03 +00:00
|
|
|
// Validate makes sure that all fields in this Config have
|
|
|
|
// working values, at least in appearance.
|
|
|
|
func (cfg *Config) Validate() error {
|
2018-03-20 18:35:42 +00:00
|
|
|
switch {
|
|
|
|
case cfg.ReadTimeout < 0:
|
Issue #162: Rework configuration format
The following commit reimplements ipfs-cluster configuration under
the following premises:
* Each component is initialized with a configuration object
defined by its module
* Each component decides how the JSON representation of its
configuration looks like
* Each component parses and validates its own configuration
* Each component exposes its own defaults
* Component configurations are make the sections of a
central JSON configuration file (which replaces the current
JSON format)
* Component configurations implement a common interface
(config.ComponentConfig) with a set of common operations
* The central configuration file is managed by a
config.ConfigManager which:
* Registers ComponentConfigs
* Assigns the correspondent sections from the JSON file to each
component and delegates the parsing
* Delegates the JSON generation for each section
* Can be notified when the configuration is updated and must be
saved to disk
The new service.json would then look as follows:
```json
{
"cluster": {
"id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2",
"private_key": "<...>",
"secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786",
"peers": [],
"bootstrap": [],
"leave_on_shutdown": false,
"listen_multiaddress": "/ip4/0.0.0.0/tcp/9096",
"state_sync_interval": "1m0s",
"ipfs_sync_interval": "2m10s",
"replication_factor": -1,
"monitor_ping_interval": "15s"
},
"consensus": {
"raft": {
"heartbeat_timeout": "1s",
"election_timeout": "1s",
"commit_timeout": "50ms",
"max_append_entries": 64,
"trailing_logs": 10240,
"snapshot_interval": "2m0s",
"snapshot_threshold": 8192,
"leader_lease_timeout": "500ms"
}
},
"api": {
"restapi": {
"listen_multiaddress": "/ip4/127.0.0.1/tcp/9094",
"read_timeout": "30s",
"read_header_timeout": "5s",
"write_timeout": "1m0s",
"idle_timeout": "2m0s"
}
},
"ipfs_connector": {
"ipfshttp": {
"proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095",
"node_multiaddress": "/ip4/127.0.0.1/tcp/5001",
"connect_swarms_delay": "7s",
"proxy_read_timeout": "10m0s",
"proxy_read_header_timeout": "5s",
"proxy_write_timeout": "10m0s",
"proxy_idle_timeout": "1m0s"
}
},
"monitor": {
"monbasic": {
"check_interval": "15s"
}
},
"informer": {
"disk": {
"metric_ttl": "30s",
"metric_type": "freespace"
},
"numpin": {
"metric_ttl": "10s"
}
}
}
```
This new format aims to be easily extensible per component. As such,
it already surfaces quite a few new options which were hardcoded
before.
Additionally, since Go API have changed, some redundant methods have been
removed and small refactoring has happened to take advantage of the new
way.
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>
2017-10-11 18:23:03 +00:00
|
|
|
return errors.New("restapi.read_timeout is invalid")
|
2018-03-20 18:35:42 +00:00
|
|
|
case cfg.ReadHeaderTimeout < 0:
|
Issue #162: Rework configuration format
The following commit reimplements ipfs-cluster configuration under
the following premises:
* Each component is initialized with a configuration object
defined by its module
* Each component decides how the JSON representation of its
configuration looks like
* Each component parses and validates its own configuration
* Each component exposes its own defaults
* Component configurations are make the sections of a
central JSON configuration file (which replaces the current
JSON format)
* Component configurations implement a common interface
(config.ComponentConfig) with a set of common operations
* The central configuration file is managed by a
config.ConfigManager which:
* Registers ComponentConfigs
* Assigns the correspondent sections from the JSON file to each
component and delegates the parsing
* Delegates the JSON generation for each section
* Can be notified when the configuration is updated and must be
saved to disk
The new service.json would then look as follows:
```json
{
"cluster": {
"id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2",
"private_key": "<...>",
"secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786",
"peers": [],
"bootstrap": [],
"leave_on_shutdown": false,
"listen_multiaddress": "/ip4/0.0.0.0/tcp/9096",
"state_sync_interval": "1m0s",
"ipfs_sync_interval": "2m10s",
"replication_factor": -1,
"monitor_ping_interval": "15s"
},
"consensus": {
"raft": {
"heartbeat_timeout": "1s",
"election_timeout": "1s",
"commit_timeout": "50ms",
"max_append_entries": 64,
"trailing_logs": 10240,
"snapshot_interval": "2m0s",
"snapshot_threshold": 8192,
"leader_lease_timeout": "500ms"
}
},
"api": {
"restapi": {
"listen_multiaddress": "/ip4/127.0.0.1/tcp/9094",
"read_timeout": "30s",
"read_header_timeout": "5s",
"write_timeout": "1m0s",
"idle_timeout": "2m0s"
}
},
"ipfs_connector": {
"ipfshttp": {
"proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095",
"node_multiaddress": "/ip4/127.0.0.1/tcp/5001",
"connect_swarms_delay": "7s",
"proxy_read_timeout": "10m0s",
"proxy_read_header_timeout": "5s",
"proxy_write_timeout": "10m0s",
"proxy_idle_timeout": "1m0s"
}
},
"monitor": {
"monbasic": {
"check_interval": "15s"
}
},
"informer": {
"disk": {
"metric_ttl": "30s",
"metric_type": "freespace"
},
"numpin": {
"metric_ttl": "10s"
}
}
}
```
This new format aims to be easily extensible per component. As such,
it already surfaces quite a few new options which were hardcoded
before.
Additionally, since Go API have changed, some redundant methods have been
removed and small refactoring has happened to take advantage of the new
way.
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>
2017-10-11 18:23:03 +00:00
|
|
|
return errors.New("restapi.read_header_timeout is invalid")
|
2018-03-20 18:35:42 +00:00
|
|
|
case cfg.WriteTimeout < 0:
|
Issue #162: Rework configuration format
The following commit reimplements ipfs-cluster configuration under
the following premises:
* Each component is initialized with a configuration object
defined by its module
* Each component decides how the JSON representation of its
configuration looks like
* Each component parses and validates its own configuration
* Each component exposes its own defaults
* Component configurations are make the sections of a
central JSON configuration file (which replaces the current
JSON format)
* Component configurations implement a common interface
(config.ComponentConfig) with a set of common operations
* The central configuration file is managed by a
config.ConfigManager which:
* Registers ComponentConfigs
* Assigns the correspondent sections from the JSON file to each
component and delegates the parsing
* Delegates the JSON generation for each section
* Can be notified when the configuration is updated and must be
saved to disk
The new service.json would then look as follows:
```json
{
"cluster": {
"id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2",
"private_key": "<...>",
"secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786",
"peers": [],
"bootstrap": [],
"leave_on_shutdown": false,
"listen_multiaddress": "/ip4/0.0.0.0/tcp/9096",
"state_sync_interval": "1m0s",
"ipfs_sync_interval": "2m10s",
"replication_factor": -1,
"monitor_ping_interval": "15s"
},
"consensus": {
"raft": {
"heartbeat_timeout": "1s",
"election_timeout": "1s",
"commit_timeout": "50ms",
"max_append_entries": 64,
"trailing_logs": 10240,
"snapshot_interval": "2m0s",
"snapshot_threshold": 8192,
"leader_lease_timeout": "500ms"
}
},
"api": {
"restapi": {
"listen_multiaddress": "/ip4/127.0.0.1/tcp/9094",
"read_timeout": "30s",
"read_header_timeout": "5s",
"write_timeout": "1m0s",
"idle_timeout": "2m0s"
}
},
"ipfs_connector": {
"ipfshttp": {
"proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095",
"node_multiaddress": "/ip4/127.0.0.1/tcp/5001",
"connect_swarms_delay": "7s",
"proxy_read_timeout": "10m0s",
"proxy_read_header_timeout": "5s",
"proxy_write_timeout": "10m0s",
"proxy_idle_timeout": "1m0s"
}
},
"monitor": {
"monbasic": {
"check_interval": "15s"
}
},
"informer": {
"disk": {
"metric_ttl": "30s",
"metric_type": "freespace"
},
"numpin": {
"metric_ttl": "10s"
}
}
}
```
This new format aims to be easily extensible per component. As such,
it already surfaces quite a few new options which were hardcoded
before.
Additionally, since Go API have changed, some redundant methods have been
removed and small refactoring has happened to take advantage of the new
way.
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>
2017-10-11 18:23:03 +00:00
|
|
|
return errors.New("restapi.write_timeout is invalid")
|
2018-03-20 18:35:42 +00:00
|
|
|
case cfg.IdleTimeout < 0:
|
Issue #162: Rework configuration format
The following commit reimplements ipfs-cluster configuration under
the following premises:
* Each component is initialized with a configuration object
defined by its module
* Each component decides how the JSON representation of its
configuration looks like
* Each component parses and validates its own configuration
* Each component exposes its own defaults
* Component configurations are make the sections of a
central JSON configuration file (which replaces the current
JSON format)
* Component configurations implement a common interface
(config.ComponentConfig) with a set of common operations
* The central configuration file is managed by a
config.ConfigManager which:
* Registers ComponentConfigs
* Assigns the correspondent sections from the JSON file to each
component and delegates the parsing
* Delegates the JSON generation for each section
* Can be notified when the configuration is updated and must be
saved to disk
The new service.json would then look as follows:
```json
{
"cluster": {
"id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2",
"private_key": "<...>",
"secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786",
"peers": [],
"bootstrap": [],
"leave_on_shutdown": false,
"listen_multiaddress": "/ip4/0.0.0.0/tcp/9096",
"state_sync_interval": "1m0s",
"ipfs_sync_interval": "2m10s",
"replication_factor": -1,
"monitor_ping_interval": "15s"
},
"consensus": {
"raft": {
"heartbeat_timeout": "1s",
"election_timeout": "1s",
"commit_timeout": "50ms",
"max_append_entries": 64,
"trailing_logs": 10240,
"snapshot_interval": "2m0s",
"snapshot_threshold": 8192,
"leader_lease_timeout": "500ms"
}
},
"api": {
"restapi": {
"listen_multiaddress": "/ip4/127.0.0.1/tcp/9094",
"read_timeout": "30s",
"read_header_timeout": "5s",
"write_timeout": "1m0s",
"idle_timeout": "2m0s"
}
},
"ipfs_connector": {
"ipfshttp": {
"proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095",
"node_multiaddress": "/ip4/127.0.0.1/tcp/5001",
"connect_swarms_delay": "7s",
"proxy_read_timeout": "10m0s",
"proxy_read_header_timeout": "5s",
"proxy_write_timeout": "10m0s",
"proxy_idle_timeout": "1m0s"
}
},
"monitor": {
"monbasic": {
"check_interval": "15s"
}
},
"informer": {
"disk": {
"metric_ttl": "30s",
"metric_type": "freespace"
},
"numpin": {
"metric_ttl": "10s"
}
}
}
```
This new format aims to be easily extensible per component. As such,
it already surfaces quite a few new options which were hardcoded
before.
Additionally, since Go API have changed, some redundant methods have been
removed and small refactoring has happened to take advantage of the new
way.
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>
2017-10-11 18:23:03 +00:00
|
|
|
return errors.New("restapi.idle_timeout invalid")
|
2019-03-07 05:28:06 +00:00
|
|
|
case cfg.MaxHeaderBytes < minMaxHeaderBytes:
|
|
|
|
return fmt.Errorf("restapi.max_header_bytes must be not less then %d", minMaxHeaderBytes)
|
2019-07-15 12:17:35 +00:00
|
|
|
case cfg.BasicAuthCredentials != nil && len(cfg.BasicAuthCredentials) == 0:
|
Issue #162: Rework configuration format
The following commit reimplements ipfs-cluster configuration under
the following premises:
* Each component is initialized with a configuration object
defined by its module
* Each component decides how the JSON representation of its
configuration looks like
* Each component parses and validates its own configuration
* Each component exposes its own defaults
* Component configurations are make the sections of a
central JSON configuration file (which replaces the current
JSON format)
* Component configurations implement a common interface
(config.ComponentConfig) with a set of common operations
* The central configuration file is managed by a
config.ConfigManager which:
* Registers ComponentConfigs
* Assigns the correspondent sections from the JSON file to each
component and delegates the parsing
* Delegates the JSON generation for each section
* Can be notified when the configuration is updated and must be
saved to disk
The new service.json would then look as follows:
```json
{
"cluster": {
"id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2",
"private_key": "<...>",
"secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786",
"peers": [],
"bootstrap": [],
"leave_on_shutdown": false,
"listen_multiaddress": "/ip4/0.0.0.0/tcp/9096",
"state_sync_interval": "1m0s",
"ipfs_sync_interval": "2m10s",
"replication_factor": -1,
"monitor_ping_interval": "15s"
},
"consensus": {
"raft": {
"heartbeat_timeout": "1s",
"election_timeout": "1s",
"commit_timeout": "50ms",
"max_append_entries": 64,
"trailing_logs": 10240,
"snapshot_interval": "2m0s",
"snapshot_threshold": 8192,
"leader_lease_timeout": "500ms"
}
},
"api": {
"restapi": {
"listen_multiaddress": "/ip4/127.0.0.1/tcp/9094",
"read_timeout": "30s",
"read_header_timeout": "5s",
"write_timeout": "1m0s",
"idle_timeout": "2m0s"
}
},
"ipfs_connector": {
"ipfshttp": {
"proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095",
"node_multiaddress": "/ip4/127.0.0.1/tcp/5001",
"connect_swarms_delay": "7s",
"proxy_read_timeout": "10m0s",
"proxy_read_header_timeout": "5s",
"proxy_write_timeout": "10m0s",
"proxy_idle_timeout": "1m0s"
}
},
"monitor": {
"monbasic": {
"check_interval": "15s"
}
},
"informer": {
"disk": {
"metric_ttl": "30s",
"metric_type": "freespace"
},
"numpin": {
"metric_ttl": "10s"
}
}
}
```
This new format aims to be easily extensible per component. As such,
it already surfaces quite a few new options which were hardcoded
before.
Additionally, since Go API have changed, some redundant methods have been
removed and small refactoring has happened to take advantage of the new
way.
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>
2017-10-11 18:23:03 +00:00
|
|
|
return errors.New("restapi.basic_auth_creds should be null or have at least one entry")
|
2018-03-20 18:35:42 +00:00
|
|
|
case (cfg.pathSSLCertFile != "" || cfg.pathSSLKeyFile != "") && cfg.TLS == nil:
|
2019-01-11 11:36:25 +00:00
|
|
|
return errors.New("restapi: missing TLS configuration")
|
|
|
|
case (cfg.CORSMaxAge < 0):
|
|
|
|
return errors.New("restapi.cors_max_age is invalid")
|
Issue #162: Rework configuration format
The following commit reimplements ipfs-cluster configuration under
the following premises:
* Each component is initialized with a configuration object
defined by its module
* Each component decides how the JSON representation of its
configuration looks like
* Each component parses and validates its own configuration
* Each component exposes its own defaults
* Component configurations are make the sections of a
central JSON configuration file (which replaces the current
JSON format)
* Component configurations implement a common interface
(config.ComponentConfig) with a set of common operations
* The central configuration file is managed by a
config.ConfigManager which:
* Registers ComponentConfigs
* Assigns the correspondent sections from the JSON file to each
component and delegates the parsing
* Delegates the JSON generation for each section
* Can be notified when the configuration is updated and must be
saved to disk
The new service.json would then look as follows:
```json
{
"cluster": {
"id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2",
"private_key": "<...>",
"secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786",
"peers": [],
"bootstrap": [],
"leave_on_shutdown": false,
"listen_multiaddress": "/ip4/0.0.0.0/tcp/9096",
"state_sync_interval": "1m0s",
"ipfs_sync_interval": "2m10s",
"replication_factor": -1,
"monitor_ping_interval": "15s"
},
"consensus": {
"raft": {
"heartbeat_timeout": "1s",
"election_timeout": "1s",
"commit_timeout": "50ms",
"max_append_entries": 64,
"trailing_logs": 10240,
"snapshot_interval": "2m0s",
"snapshot_threshold": 8192,
"leader_lease_timeout": "500ms"
}
},
"api": {
"restapi": {
"listen_multiaddress": "/ip4/127.0.0.1/tcp/9094",
"read_timeout": "30s",
"read_header_timeout": "5s",
"write_timeout": "1m0s",
"idle_timeout": "2m0s"
}
},
"ipfs_connector": {
"ipfshttp": {
"proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095",
"node_multiaddress": "/ip4/127.0.0.1/tcp/5001",
"connect_swarms_delay": "7s",
"proxy_read_timeout": "10m0s",
"proxy_read_header_timeout": "5s",
"proxy_write_timeout": "10m0s",
"proxy_idle_timeout": "1m0s"
}
},
"monitor": {
"monbasic": {
"check_interval": "15s"
}
},
"informer": {
"disk": {
"metric_ttl": "30s",
"metric_type": "freespace"
},
"numpin": {
"metric_ttl": "10s"
}
}
}
```
This new format aims to be easily extensible per component. As such,
it already surfaces quite a few new options which were hardcoded
before.
Additionally, since Go API have changed, some redundant methods have been
removed and small refactoring has happened to take advantage of the new
way.
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>
2017-10-11 18:23:03 +00:00
|
|
|
}
|
|
|
|
|
2018-03-16 13:55:36 +00:00
|
|
|
return cfg.validateLibp2p()
|
|
|
|
}
|
|
|
|
|
|
|
|
func (cfg *Config) validateLibp2p() error {
|
2020-02-28 16:16:16 +00:00
|
|
|
if cfg.ID != "" || cfg.PrivateKey != nil || len(cfg.Libp2pListenAddr) > 0 {
|
2018-03-14 20:59:28 +00:00
|
|
|
// if one is set, all should be
|
2020-02-28 16:16:16 +00:00
|
|
|
if cfg.ID == "" || cfg.PrivateKey == nil || len(cfg.Libp2pListenAddr) == 0 {
|
2018-03-14 20:59:28 +00:00
|
|
|
return errors.New("all ID, private_key and libp2p_listen_multiaddress should be set")
|
|
|
|
}
|
|
|
|
if !cfg.ID.MatchesPrivateKey(cfg.PrivateKey) {
|
|
|
|
return errors.New("restapi.ID does not match private_key")
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
Issue #162: Rework configuration format
The following commit reimplements ipfs-cluster configuration under
the following premises:
* Each component is initialized with a configuration object
defined by its module
* Each component decides how the JSON representation of its
configuration looks like
* Each component parses and validates its own configuration
* Each component exposes its own defaults
* Component configurations are make the sections of a
central JSON configuration file (which replaces the current
JSON format)
* Component configurations implement a common interface
(config.ComponentConfig) with a set of common operations
* The central configuration file is managed by a
config.ConfigManager which:
* Registers ComponentConfigs
* Assigns the correspondent sections from the JSON file to each
component and delegates the parsing
* Delegates the JSON generation for each section
* Can be notified when the configuration is updated and must be
saved to disk
The new service.json would then look as follows:
```json
{
"cluster": {
"id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2",
"private_key": "<...>",
"secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786",
"peers": [],
"bootstrap": [],
"leave_on_shutdown": false,
"listen_multiaddress": "/ip4/0.0.0.0/tcp/9096",
"state_sync_interval": "1m0s",
"ipfs_sync_interval": "2m10s",
"replication_factor": -1,
"monitor_ping_interval": "15s"
},
"consensus": {
"raft": {
"heartbeat_timeout": "1s",
"election_timeout": "1s",
"commit_timeout": "50ms",
"max_append_entries": 64,
"trailing_logs": 10240,
"snapshot_interval": "2m0s",
"snapshot_threshold": 8192,
"leader_lease_timeout": "500ms"
}
},
"api": {
"restapi": {
"listen_multiaddress": "/ip4/127.0.0.1/tcp/9094",
"read_timeout": "30s",
"read_header_timeout": "5s",
"write_timeout": "1m0s",
"idle_timeout": "2m0s"
}
},
"ipfs_connector": {
"ipfshttp": {
"proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095",
"node_multiaddress": "/ip4/127.0.0.1/tcp/5001",
"connect_swarms_delay": "7s",
"proxy_read_timeout": "10m0s",
"proxy_read_header_timeout": "5s",
"proxy_write_timeout": "10m0s",
"proxy_idle_timeout": "1m0s"
}
},
"monitor": {
"monbasic": {
"check_interval": "15s"
}
},
"informer": {
"disk": {
"metric_ttl": "30s",
"metric_type": "freespace"
},
"numpin": {
"metric_ttl": "10s"
}
}
}
```
This new format aims to be easily extensible per component. As such,
it already surfaces quite a few new options which were hardcoded
before.
Additionally, since Go API have changed, some redundant methods have been
removed and small refactoring has happened to take advantage of the new
way.
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>
2017-10-11 18:23:03 +00:00
|
|
|
return nil
|
|
|
|
}
|
|
|
|
|
|
|
|
// LoadJSON parses a raw JSON byte slice created by ToJSON() and sets the
|
|
|
|
// configuration fields accordingly.
|
|
|
|
func (cfg *Config) LoadJSON(raw []byte) error {
|
|
|
|
jcfg := &jsonConfig{}
|
|
|
|
err := json.Unmarshal(raw, jcfg)
|
|
|
|
if err != nil {
|
|
|
|
logger.Error("Error unmarshaling restapi config")
|
|
|
|
return err
|
|
|
|
}
|
|
|
|
|
2018-03-14 20:59:28 +00:00
|
|
|
cfg.Default()
|
Issue #162: Rework configuration format
The following commit reimplements ipfs-cluster configuration under
the following premises:
* Each component is initialized with a configuration object
defined by its module
* Each component decides how the JSON representation of its
configuration looks like
* Each component parses and validates its own configuration
* Each component exposes its own defaults
* Component configurations are make the sections of a
central JSON configuration file (which replaces the current
JSON format)
* Component configurations implement a common interface
(config.ComponentConfig) with a set of common operations
* The central configuration file is managed by a
config.ConfigManager which:
* Registers ComponentConfigs
* Assigns the correspondent sections from the JSON file to each
component and delegates the parsing
* Delegates the JSON generation for each section
* Can be notified when the configuration is updated and must be
saved to disk
The new service.json would then look as follows:
```json
{
"cluster": {
"id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2",
"private_key": "<...>",
"secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786",
"peers": [],
"bootstrap": [],
"leave_on_shutdown": false,
"listen_multiaddress": "/ip4/0.0.0.0/tcp/9096",
"state_sync_interval": "1m0s",
"ipfs_sync_interval": "2m10s",
"replication_factor": -1,
"monitor_ping_interval": "15s"
},
"consensus": {
"raft": {
"heartbeat_timeout": "1s",
"election_timeout": "1s",
"commit_timeout": "50ms",
"max_append_entries": 64,
"trailing_logs": 10240,
"snapshot_interval": "2m0s",
"snapshot_threshold": 8192,
"leader_lease_timeout": "500ms"
}
},
"api": {
"restapi": {
"listen_multiaddress": "/ip4/127.0.0.1/tcp/9094",
"read_timeout": "30s",
"read_header_timeout": "5s",
"write_timeout": "1m0s",
"idle_timeout": "2m0s"
}
},
"ipfs_connector": {
"ipfshttp": {
"proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095",
"node_multiaddress": "/ip4/127.0.0.1/tcp/5001",
"connect_swarms_delay": "7s",
"proxy_read_timeout": "10m0s",
"proxy_read_header_timeout": "5s",
"proxy_write_timeout": "10m0s",
"proxy_idle_timeout": "1m0s"
}
},
"monitor": {
"monbasic": {
"check_interval": "15s"
}
},
"informer": {
"disk": {
"metric_ttl": "30s",
"metric_type": "freespace"
},
"numpin": {
"metric_ttl": "10s"
}
}
}
```
This new format aims to be easily extensible per component. As such,
it already surfaces quite a few new options which were hardcoded
before.
Additionally, since Go API have changed, some redundant methods have been
removed and small refactoring has happened to take advantage of the new
way.
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>
2017-10-11 18:23:03 +00:00
|
|
|
|
2019-02-07 18:46:42 +00:00
|
|
|
return cfg.applyJSONConfig(jcfg)
|
|
|
|
}
|
|
|
|
|
|
|
|
func (cfg *Config) applyJSONConfig(jcfg *jsonConfig) error {
|
|
|
|
err := cfg.loadHTTPOptions(jcfg)
|
2018-03-16 12:48:46 +00:00
|
|
|
if err != nil {
|
|
|
|
return err
|
|
|
|
}
|
2020-02-28 16:16:16 +00:00
|
|
|
|
2018-03-16 12:48:46 +00:00
|
|
|
err = cfg.loadLibp2pOptions(jcfg)
|
|
|
|
if err != nil {
|
|
|
|
return err
|
|
|
|
}
|
|
|
|
|
|
|
|
// Other options
|
2019-07-15 12:17:35 +00:00
|
|
|
cfg.BasicAuthCredentials = jcfg.BasicAuthCredentials
|
2019-08-27 09:11:15 +00:00
|
|
|
cfg.HTTPLogFile = jcfg.HTTPLogFile
|
2019-08-28 16:43:23 +00:00
|
|
|
cfg.Headers = jcfg.Headers
|
2018-03-16 12:48:46 +00:00
|
|
|
|
|
|
|
return cfg.Validate()
|
|
|
|
}
|
2018-03-14 20:59:28 +00:00
|
|
|
|
2018-03-16 12:48:46 +00:00
|
|
|
func (cfg *Config) loadHTTPOptions(jcfg *jsonConfig) error {
|
2020-02-28 16:16:16 +00:00
|
|
|
if addresses := jcfg.HTTPListenMultiaddress; len(addresses) > 0 {
|
|
|
|
cfg.HTTPListenAddr = make([]ma.Multiaddr, 0, len(addresses))
|
|
|
|
for _, addr := range addresses {
|
|
|
|
httpAddr, err := ma.NewMultiaddr(addr)
|
|
|
|
if err != nil {
|
|
|
|
err = fmt.Errorf("error parsing restapi.http_listen_multiaddress: %s", err)
|
|
|
|
return err
|
|
|
|
}
|
|
|
|
cfg.HTTPListenAddr = append(cfg.HTTPListenAddr, httpAddr)
|
2018-03-14 20:59:28 +00:00
|
|
|
}
|
Issue #162: Rework configuration format
The following commit reimplements ipfs-cluster configuration under
the following premises:
* Each component is initialized with a configuration object
defined by its module
* Each component decides how the JSON representation of its
configuration looks like
* Each component parses and validates its own configuration
* Each component exposes its own defaults
* Component configurations are make the sections of a
central JSON configuration file (which replaces the current
JSON format)
* Component configurations implement a common interface
(config.ComponentConfig) with a set of common operations
* The central configuration file is managed by a
config.ConfigManager which:
* Registers ComponentConfigs
* Assigns the correspondent sections from the JSON file to each
component and delegates the parsing
* Delegates the JSON generation for each section
* Can be notified when the configuration is updated and must be
saved to disk
The new service.json would then look as follows:
```json
{
"cluster": {
"id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2",
"private_key": "<...>",
"secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786",
"peers": [],
"bootstrap": [],
"leave_on_shutdown": false,
"listen_multiaddress": "/ip4/0.0.0.0/tcp/9096",
"state_sync_interval": "1m0s",
"ipfs_sync_interval": "2m10s",
"replication_factor": -1,
"monitor_ping_interval": "15s"
},
"consensus": {
"raft": {
"heartbeat_timeout": "1s",
"election_timeout": "1s",
"commit_timeout": "50ms",
"max_append_entries": 64,
"trailing_logs": 10240,
"snapshot_interval": "2m0s",
"snapshot_threshold": 8192,
"leader_lease_timeout": "500ms"
}
},
"api": {
"restapi": {
"listen_multiaddress": "/ip4/127.0.0.1/tcp/9094",
"read_timeout": "30s",
"read_header_timeout": "5s",
"write_timeout": "1m0s",
"idle_timeout": "2m0s"
}
},
"ipfs_connector": {
"ipfshttp": {
"proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095",
"node_multiaddress": "/ip4/127.0.0.1/tcp/5001",
"connect_swarms_delay": "7s",
"proxy_read_timeout": "10m0s",
"proxy_read_header_timeout": "5s",
"proxy_write_timeout": "10m0s",
"proxy_idle_timeout": "1m0s"
}
},
"monitor": {
"monbasic": {
"check_interval": "15s"
}
},
"informer": {
"disk": {
"metric_ttl": "30s",
"metric_type": "freespace"
},
"numpin": {
"metric_ttl": "10s"
}
}
}
```
This new format aims to be easily extensible per component. As such,
it already surfaces quite a few new options which were hardcoded
before.
Additionally, since Go API have changed, some redundant methods have been
removed and small refactoring has happened to take advantage of the new
way.
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>
2017-10-11 18:23:03 +00:00
|
|
|
}
|
|
|
|
|
2018-03-16 13:55:36 +00:00
|
|
|
err := cfg.tlsOptions(jcfg)
|
|
|
|
if err != nil {
|
|
|
|
return err
|
Issue #162: Rework configuration format
The following commit reimplements ipfs-cluster configuration under
the following premises:
* Each component is initialized with a configuration object
defined by its module
* Each component decides how the JSON representation of its
configuration looks like
* Each component parses and validates its own configuration
* Each component exposes its own defaults
* Component configurations are make the sections of a
central JSON configuration file (which replaces the current
JSON format)
* Component configurations implement a common interface
(config.ComponentConfig) with a set of common operations
* The central configuration file is managed by a
config.ConfigManager which:
* Registers ComponentConfigs
* Assigns the correspondent sections from the JSON file to each
component and delegates the parsing
* Delegates the JSON generation for each section
* Can be notified when the configuration is updated and must be
saved to disk
The new service.json would then look as follows:
```json
{
"cluster": {
"id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2",
"private_key": "<...>",
"secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786",
"peers": [],
"bootstrap": [],
"leave_on_shutdown": false,
"listen_multiaddress": "/ip4/0.0.0.0/tcp/9096",
"state_sync_interval": "1m0s",
"ipfs_sync_interval": "2m10s",
"replication_factor": -1,
"monitor_ping_interval": "15s"
},
"consensus": {
"raft": {
"heartbeat_timeout": "1s",
"election_timeout": "1s",
"commit_timeout": "50ms",
"max_append_entries": 64,
"trailing_logs": 10240,
"snapshot_interval": "2m0s",
"snapshot_threshold": 8192,
"leader_lease_timeout": "500ms"
}
},
"api": {
"restapi": {
"listen_multiaddress": "/ip4/127.0.0.1/tcp/9094",
"read_timeout": "30s",
"read_header_timeout": "5s",
"write_timeout": "1m0s",
"idle_timeout": "2m0s"
}
},
"ipfs_connector": {
"ipfshttp": {
"proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095",
"node_multiaddress": "/ip4/127.0.0.1/tcp/5001",
"connect_swarms_delay": "7s",
"proxy_read_timeout": "10m0s",
"proxy_read_header_timeout": "5s",
"proxy_write_timeout": "10m0s",
"proxy_idle_timeout": "1m0s"
}
},
"monitor": {
"monbasic": {
"check_interval": "15s"
}
},
"informer": {
"disk": {
"metric_ttl": "30s",
"metric_type": "freespace"
},
"numpin": {
"metric_ttl": "10s"
}
}
}
```
This new format aims to be easily extensible per component. As such,
it already surfaces quite a few new options which were hardcoded
before.
Additionally, since Go API have changed, some redundant methods have been
removed and small refactoring has happened to take advantage of the new
way.
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>
2017-10-11 18:23:03 +00:00
|
|
|
}
|
|
|
|
|
2019-03-07 05:28:06 +00:00
|
|
|
if jcfg.MaxHeaderBytes == 0 {
|
|
|
|
cfg.MaxHeaderBytes = DefaultMaxHeaderBytes
|
|
|
|
} else {
|
|
|
|
cfg.MaxHeaderBytes = jcfg.MaxHeaderBytes
|
|
|
|
}
|
|
|
|
|
2019-01-11 11:36:25 +00:00
|
|
|
// CORS
|
|
|
|
cfg.CORSAllowedOrigins = jcfg.CORSAllowedOrigins
|
|
|
|
cfg.CORSAllowedMethods = jcfg.CORSAllowedMethods
|
|
|
|
cfg.CORSAllowedHeaders = jcfg.CORSAllowedHeaders
|
|
|
|
cfg.CORSExposedHeaders = jcfg.CORSExposedHeaders
|
|
|
|
cfg.CORSAllowCredentials = jcfg.CORSAllowCredentials
|
2019-01-11 14:32:37 +00:00
|
|
|
if jcfg.CORSMaxAge == "" { // compatibility
|
|
|
|
jcfg.CORSMaxAge = "0s"
|
|
|
|
}
|
2019-01-11 11:36:25 +00:00
|
|
|
|
2018-03-16 13:22:11 +00:00
|
|
|
return config.ParseDurations(
|
|
|
|
"restapi",
|
2018-05-11 17:59:10 +00:00
|
|
|
&config.DurationOpt{Duration: jcfg.ReadTimeout, Dst: &cfg.ReadTimeout, Name: "read_timeout"},
|
|
|
|
&config.DurationOpt{Duration: jcfg.ReadHeaderTimeout, Dst: &cfg.ReadHeaderTimeout, Name: "read_header_timeout"},
|
|
|
|
&config.DurationOpt{Duration: jcfg.WriteTimeout, Dst: &cfg.WriteTimeout, Name: "write_timeout"},
|
|
|
|
&config.DurationOpt{Duration: jcfg.IdleTimeout, Dst: &cfg.IdleTimeout, Name: "idle_timeout"},
|
2019-01-11 11:36:25 +00:00
|
|
|
&config.DurationOpt{Duration: jcfg.CORSMaxAge, Dst: &cfg.CORSMaxAge, Name: "cors_max_age"},
|
2018-03-16 13:22:11 +00:00
|
|
|
)
|
2018-03-16 12:48:46 +00:00
|
|
|
}
|
Issue #162: Rework configuration format
The following commit reimplements ipfs-cluster configuration under
the following premises:
* Each component is initialized with a configuration object
defined by its module
* Each component decides how the JSON representation of its
configuration looks like
* Each component parses and validates its own configuration
* Each component exposes its own defaults
* Component configurations are make the sections of a
central JSON configuration file (which replaces the current
JSON format)
* Component configurations implement a common interface
(config.ComponentConfig) with a set of common operations
* The central configuration file is managed by a
config.ConfigManager which:
* Registers ComponentConfigs
* Assigns the correspondent sections from the JSON file to each
component and delegates the parsing
* Delegates the JSON generation for each section
* Can be notified when the configuration is updated and must be
saved to disk
The new service.json would then look as follows:
```json
{
"cluster": {
"id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2",
"private_key": "<...>",
"secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786",
"peers": [],
"bootstrap": [],
"leave_on_shutdown": false,
"listen_multiaddress": "/ip4/0.0.0.0/tcp/9096",
"state_sync_interval": "1m0s",
"ipfs_sync_interval": "2m10s",
"replication_factor": -1,
"monitor_ping_interval": "15s"
},
"consensus": {
"raft": {
"heartbeat_timeout": "1s",
"election_timeout": "1s",
"commit_timeout": "50ms",
"max_append_entries": 64,
"trailing_logs": 10240,
"snapshot_interval": "2m0s",
"snapshot_threshold": 8192,
"leader_lease_timeout": "500ms"
}
},
"api": {
"restapi": {
"listen_multiaddress": "/ip4/127.0.0.1/tcp/9094",
"read_timeout": "30s",
"read_header_timeout": "5s",
"write_timeout": "1m0s",
"idle_timeout": "2m0s"
}
},
"ipfs_connector": {
"ipfshttp": {
"proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095",
"node_multiaddress": "/ip4/127.0.0.1/tcp/5001",
"connect_swarms_delay": "7s",
"proxy_read_timeout": "10m0s",
"proxy_read_header_timeout": "5s",
"proxy_write_timeout": "10m0s",
"proxy_idle_timeout": "1m0s"
}
},
"monitor": {
"monbasic": {
"check_interval": "15s"
}
},
"informer": {
"disk": {
"metric_ttl": "30s",
"metric_type": "freespace"
},
"numpin": {
"metric_ttl": "10s"
}
}
}
```
This new format aims to be easily extensible per component. As such,
it already surfaces quite a few new options which were hardcoded
before.
Additionally, since Go API have changed, some redundant methods have been
removed and small refactoring has happened to take advantage of the new
way.
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>
2017-10-11 18:23:03 +00:00
|
|
|
|
2018-03-16 13:55:36 +00:00
|
|
|
func (cfg *Config) tlsOptions(jcfg *jsonConfig) error {
|
|
|
|
cert := jcfg.SSLCertFile
|
|
|
|
key := jcfg.SSLKeyFile
|
|
|
|
|
|
|
|
if cert+key == "" {
|
|
|
|
return nil
|
|
|
|
}
|
|
|
|
|
|
|
|
cfg.pathSSLCertFile = cert
|
|
|
|
cfg.pathSSLKeyFile = key
|
|
|
|
|
|
|
|
if !filepath.IsAbs(cert) {
|
|
|
|
cert = filepath.Join(cfg.BaseDir, cert)
|
|
|
|
}
|
|
|
|
|
|
|
|
if !filepath.IsAbs(key) {
|
|
|
|
key = filepath.Join(cfg.BaseDir, key)
|
|
|
|
}
|
|
|
|
|
|
|
|
logger.Debug(cfg.BaseDir)
|
|
|
|
logger.Debug(cert, key)
|
|
|
|
|
|
|
|
tlsCfg, err := newTLSConfig(cert, key)
|
|
|
|
if err != nil {
|
|
|
|
return err
|
|
|
|
}
|
|
|
|
cfg.TLS = tlsCfg
|
|
|
|
return nil
|
|
|
|
}
|
|
|
|
|
2018-03-16 12:48:46 +00:00
|
|
|
func (cfg *Config) loadLibp2pOptions(jcfg *jsonConfig) error {
|
2020-02-28 16:16:16 +00:00
|
|
|
if addresses := jcfg.Libp2pListenMultiaddress; len(addresses) > 0 {
|
|
|
|
cfg.Libp2pListenAddr = make([]ma.Multiaddr, 0, len(addresses))
|
|
|
|
for _, addr := range addresses {
|
|
|
|
libp2pAddr, err := ma.NewMultiaddr(addr)
|
|
|
|
if err != nil {
|
|
|
|
err = fmt.Errorf("error parsing restapi.libp2p_listen_multiaddress: %s", err)
|
|
|
|
return err
|
|
|
|
}
|
|
|
|
cfg.Libp2pListenAddr = append(cfg.Libp2pListenAddr, libp2pAddr)
|
2018-03-14 20:59:28 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if jcfg.PrivateKey != "" {
|
|
|
|
pkb, err := base64.StdEncoding.DecodeString(jcfg.PrivateKey)
|
|
|
|
if err != nil {
|
|
|
|
return fmt.Errorf("error decoding restapi.private_key: %s", err)
|
|
|
|
}
|
|
|
|
pKey, err := crypto.UnmarshalPrivateKey(pkb)
|
|
|
|
if err != nil {
|
|
|
|
return fmt.Errorf("error parsing restapi.private_key ID: %s", err)
|
|
|
|
}
|
|
|
|
cfg.PrivateKey = pKey
|
|
|
|
}
|
|
|
|
|
|
|
|
if jcfg.ID != "" {
|
2020-04-14 17:58:00 +00:00
|
|
|
id, err := peer.Decode(jcfg.ID)
|
2018-03-14 20:59:28 +00:00
|
|
|
if err != nil {
|
|
|
|
return fmt.Errorf("error parsing restapi.ID: %s", err)
|
|
|
|
}
|
|
|
|
cfg.ID = id
|
|
|
|
}
|
2018-03-16 12:48:46 +00:00
|
|
|
return nil
|
Issue #162: Rework configuration format
The following commit reimplements ipfs-cluster configuration under
the following premises:
* Each component is initialized with a configuration object
defined by its module
* Each component decides how the JSON representation of its
configuration looks like
* Each component parses and validates its own configuration
* Each component exposes its own defaults
* Component configurations are make the sections of a
central JSON configuration file (which replaces the current
JSON format)
* Component configurations implement a common interface
(config.ComponentConfig) with a set of common operations
* The central configuration file is managed by a
config.ConfigManager which:
* Registers ComponentConfigs
* Assigns the correspondent sections from the JSON file to each
component and delegates the parsing
* Delegates the JSON generation for each section
* Can be notified when the configuration is updated and must be
saved to disk
The new service.json would then look as follows:
```json
{
"cluster": {
"id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2",
"private_key": "<...>",
"secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786",
"peers": [],
"bootstrap": [],
"leave_on_shutdown": false,
"listen_multiaddress": "/ip4/0.0.0.0/tcp/9096",
"state_sync_interval": "1m0s",
"ipfs_sync_interval": "2m10s",
"replication_factor": -1,
"monitor_ping_interval": "15s"
},
"consensus": {
"raft": {
"heartbeat_timeout": "1s",
"election_timeout": "1s",
"commit_timeout": "50ms",
"max_append_entries": 64,
"trailing_logs": 10240,
"snapshot_interval": "2m0s",
"snapshot_threshold": 8192,
"leader_lease_timeout": "500ms"
}
},
"api": {
"restapi": {
"listen_multiaddress": "/ip4/127.0.0.1/tcp/9094",
"read_timeout": "30s",
"read_header_timeout": "5s",
"write_timeout": "1m0s",
"idle_timeout": "2m0s"
}
},
"ipfs_connector": {
"ipfshttp": {
"proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095",
"node_multiaddress": "/ip4/127.0.0.1/tcp/5001",
"connect_swarms_delay": "7s",
"proxy_read_timeout": "10m0s",
"proxy_read_header_timeout": "5s",
"proxy_write_timeout": "10m0s",
"proxy_idle_timeout": "1m0s"
}
},
"monitor": {
"monbasic": {
"check_interval": "15s"
}
},
"informer": {
"disk": {
"metric_ttl": "30s",
"metric_type": "freespace"
},
"numpin": {
"metric_ttl": "10s"
}
}
}
```
This new format aims to be easily extensible per component. As such,
it already surfaces quite a few new options which were hardcoded
before.
Additionally, since Go API have changed, some redundant methods have been
removed and small refactoring has happened to take advantage of the new
way.
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>
2017-10-11 18:23:03 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
// ToJSON produce a human-friendly JSON representation of the Config
|
|
|
|
// object.
|
|
|
|
func (cfg *Config) ToJSON() (raw []byte, err error) {
|
2019-02-15 17:07:20 +00:00
|
|
|
jcfg, err := cfg.toJSONConfig()
|
|
|
|
if err != nil {
|
|
|
|
return
|
|
|
|
}
|
|
|
|
|
|
|
|
raw, err = config.DefaultJSONMarshal(jcfg)
|
|
|
|
return
|
|
|
|
}
|
|
|
|
|
|
|
|
func (cfg *Config) toJSONConfig() (jcfg *jsonConfig, err error) {
|
Issue #162: Rework configuration format
The following commit reimplements ipfs-cluster configuration under
the following premises:
* Each component is initialized with a configuration object
defined by its module
* Each component decides how the JSON representation of its
configuration looks like
* Each component parses and validates its own configuration
* Each component exposes its own defaults
* Component configurations are make the sections of a
central JSON configuration file (which replaces the current
JSON format)
* Component configurations implement a common interface
(config.ComponentConfig) with a set of common operations
* The central configuration file is managed by a
config.ConfigManager which:
* Registers ComponentConfigs
* Assigns the correspondent sections from the JSON file to each
component and delegates the parsing
* Delegates the JSON generation for each section
* Can be notified when the configuration is updated and must be
saved to disk
The new service.json would then look as follows:
```json
{
"cluster": {
"id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2",
"private_key": "<...>",
"secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786",
"peers": [],
"bootstrap": [],
"leave_on_shutdown": false,
"listen_multiaddress": "/ip4/0.0.0.0/tcp/9096",
"state_sync_interval": "1m0s",
"ipfs_sync_interval": "2m10s",
"replication_factor": -1,
"monitor_ping_interval": "15s"
},
"consensus": {
"raft": {
"heartbeat_timeout": "1s",
"election_timeout": "1s",
"commit_timeout": "50ms",
"max_append_entries": 64,
"trailing_logs": 10240,
"snapshot_interval": "2m0s",
"snapshot_threshold": 8192,
"leader_lease_timeout": "500ms"
}
},
"api": {
"restapi": {
"listen_multiaddress": "/ip4/127.0.0.1/tcp/9094",
"read_timeout": "30s",
"read_header_timeout": "5s",
"write_timeout": "1m0s",
"idle_timeout": "2m0s"
}
},
"ipfs_connector": {
"ipfshttp": {
"proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095",
"node_multiaddress": "/ip4/127.0.0.1/tcp/5001",
"connect_swarms_delay": "7s",
"proxy_read_timeout": "10m0s",
"proxy_read_header_timeout": "5s",
"proxy_write_timeout": "10m0s",
"proxy_idle_timeout": "1m0s"
}
},
"monitor": {
"monbasic": {
"check_interval": "15s"
}
},
"informer": {
"disk": {
"metric_ttl": "30s",
"metric_type": "freespace"
},
"numpin": {
"metric_ttl": "10s"
}
}
}
```
This new format aims to be easily extensible per component. As such,
it already surfaces quite a few new options which were hardcoded
before.
Additionally, since Go API have changed, some redundant methods have been
removed and small refactoring has happened to take advantage of the new
way.
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>
2017-10-11 18:23:03 +00:00
|
|
|
// Multiaddress String() may panic
|
|
|
|
defer func() {
|
|
|
|
if r := recover(); r != nil {
|
|
|
|
err = fmt.Errorf("%s", r)
|
|
|
|
}
|
|
|
|
}()
|
|
|
|
|
2020-02-28 16:16:16 +00:00
|
|
|
httpAddresses := make([]string, 0, len(cfg.HTTPListenAddr))
|
|
|
|
for _, addr := range cfg.HTTPListenAddr {
|
|
|
|
httpAddresses = append(httpAddresses, addr.String())
|
|
|
|
}
|
|
|
|
|
|
|
|
libp2pAddresses := make([]string, 0, len(cfg.Libp2pListenAddr))
|
|
|
|
for _, addr := range cfg.Libp2pListenAddr {
|
|
|
|
libp2pAddresses = append(libp2pAddresses, addr.String())
|
|
|
|
}
|
|
|
|
|
2019-02-15 17:07:20 +00:00
|
|
|
jcfg = &jsonConfig{
|
2020-02-28 16:16:16 +00:00
|
|
|
HTTPListenMultiaddress: httpAddresses,
|
2018-03-20 18:35:42 +00:00
|
|
|
SSLCertFile: cfg.pathSSLCertFile,
|
|
|
|
SSLKeyFile: cfg.pathSSLKeyFile,
|
|
|
|
ReadTimeout: cfg.ReadTimeout.String(),
|
|
|
|
ReadHeaderTimeout: cfg.ReadHeaderTimeout.String(),
|
|
|
|
WriteTimeout: cfg.WriteTimeout.String(),
|
|
|
|
IdleTimeout: cfg.IdleTimeout.String(),
|
2019-03-07 05:28:06 +00:00
|
|
|
MaxHeaderBytes: cfg.MaxHeaderBytes,
|
2019-07-15 12:17:35 +00:00
|
|
|
BasicAuthCredentials: cfg.BasicAuthCredentials,
|
2019-08-28 16:43:23 +00:00
|
|
|
HTTPLogFile: cfg.HTTPLogFile,
|
2018-10-16 13:23:06 +00:00
|
|
|
Headers: cfg.Headers,
|
2019-01-11 11:36:25 +00:00
|
|
|
CORSAllowedOrigins: cfg.CORSAllowedOrigins,
|
|
|
|
CORSAllowedMethods: cfg.CORSAllowedMethods,
|
|
|
|
CORSAllowedHeaders: cfg.CORSAllowedHeaders,
|
|
|
|
CORSExposedHeaders: cfg.CORSExposedHeaders,
|
|
|
|
CORSAllowCredentials: cfg.CORSAllowCredentials,
|
|
|
|
CORSMaxAge: cfg.CORSMaxAge.String(),
|
2018-03-20 18:35:42 +00:00
|
|
|
}
|
2018-03-14 20:59:28 +00:00
|
|
|
|
|
|
|
if cfg.ID != "" {
|
2020-04-14 17:58:00 +00:00
|
|
|
jcfg.ID = peer.Encode(cfg.ID)
|
2018-03-14 20:59:28 +00:00
|
|
|
}
|
|
|
|
if cfg.PrivateKey != nil {
|
|
|
|
pkeyBytes, err := cfg.PrivateKey.Bytes()
|
|
|
|
if err == nil {
|
|
|
|
pKey := base64.StdEncoding.EncodeToString(pkeyBytes)
|
|
|
|
jcfg.PrivateKey = pKey
|
|
|
|
}
|
|
|
|
}
|
2020-02-28 16:16:16 +00:00
|
|
|
if len(libp2pAddresses) > 0 {
|
|
|
|
jcfg.Libp2pListenMultiaddress = libp2pAddresses
|
2018-03-14 20:59:28 +00:00
|
|
|
}
|
|
|
|
|
Issue #162: Rework configuration format
The following commit reimplements ipfs-cluster configuration under
the following premises:
* Each component is initialized with a configuration object
defined by its module
* Each component decides how the JSON representation of its
configuration looks like
* Each component parses and validates its own configuration
* Each component exposes its own defaults
* Component configurations are make the sections of a
central JSON configuration file (which replaces the current
JSON format)
* Component configurations implement a common interface
(config.ComponentConfig) with a set of common operations
* The central configuration file is managed by a
config.ConfigManager which:
* Registers ComponentConfigs
* Assigns the correspondent sections from the JSON file to each
component and delegates the parsing
* Delegates the JSON generation for each section
* Can be notified when the configuration is updated and must be
saved to disk
The new service.json would then look as follows:
```json
{
"cluster": {
"id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2",
"private_key": "<...>",
"secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786",
"peers": [],
"bootstrap": [],
"leave_on_shutdown": false,
"listen_multiaddress": "/ip4/0.0.0.0/tcp/9096",
"state_sync_interval": "1m0s",
"ipfs_sync_interval": "2m10s",
"replication_factor": -1,
"monitor_ping_interval": "15s"
},
"consensus": {
"raft": {
"heartbeat_timeout": "1s",
"election_timeout": "1s",
"commit_timeout": "50ms",
"max_append_entries": 64,
"trailing_logs": 10240,
"snapshot_interval": "2m0s",
"snapshot_threshold": 8192,
"leader_lease_timeout": "500ms"
}
},
"api": {
"restapi": {
"listen_multiaddress": "/ip4/127.0.0.1/tcp/9094",
"read_timeout": "30s",
"read_header_timeout": "5s",
"write_timeout": "1m0s",
"idle_timeout": "2m0s"
}
},
"ipfs_connector": {
"ipfshttp": {
"proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095",
"node_multiaddress": "/ip4/127.0.0.1/tcp/5001",
"connect_swarms_delay": "7s",
"proxy_read_timeout": "10m0s",
"proxy_read_header_timeout": "5s",
"proxy_write_timeout": "10m0s",
"proxy_idle_timeout": "1m0s"
}
},
"monitor": {
"monbasic": {
"check_interval": "15s"
}
},
"informer": {
"disk": {
"metric_ttl": "30s",
"metric_type": "freespace"
},
"numpin": {
"metric_ttl": "10s"
}
}
}
```
This new format aims to be easily extensible per component. As such,
it already surfaces quite a few new options which were hardcoded
before.
Additionally, since Go API have changed, some redundant methods have been
removed and small refactoring has happened to take advantage of the new
way.
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>
2017-10-11 18:23:03 +00:00
|
|
|
return
|
|
|
|
}
|
|
|
|
|
2019-01-11 12:25:21 +00:00
|
|
|
func (cfg *Config) corsOptions() *cors.Options {
|
|
|
|
maxAgeSeconds := int(cfg.CORSMaxAge / time.Second)
|
|
|
|
|
|
|
|
return &cors.Options{
|
|
|
|
AllowedOrigins: cfg.CORSAllowedOrigins,
|
|
|
|
AllowedMethods: cfg.CORSAllowedMethods,
|
|
|
|
AllowedHeaders: cfg.CORSAllowedHeaders,
|
|
|
|
ExposedHeaders: cfg.CORSExposedHeaders,
|
|
|
|
AllowCredentials: cfg.CORSAllowCredentials,
|
|
|
|
MaxAge: maxAgeSeconds,
|
|
|
|
Debug: false,
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
Issue #162: Rework configuration format
The following commit reimplements ipfs-cluster configuration under
the following premises:
* Each component is initialized with a configuration object
defined by its module
* Each component decides how the JSON representation of its
configuration looks like
* Each component parses and validates its own configuration
* Each component exposes its own defaults
* Component configurations are make the sections of a
central JSON configuration file (which replaces the current
JSON format)
* Component configurations implement a common interface
(config.ComponentConfig) with a set of common operations
* The central configuration file is managed by a
config.ConfigManager which:
* Registers ComponentConfigs
* Assigns the correspondent sections from the JSON file to each
component and delegates the parsing
* Delegates the JSON generation for each section
* Can be notified when the configuration is updated and must be
saved to disk
The new service.json would then look as follows:
```json
{
"cluster": {
"id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2",
"private_key": "<...>",
"secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786",
"peers": [],
"bootstrap": [],
"leave_on_shutdown": false,
"listen_multiaddress": "/ip4/0.0.0.0/tcp/9096",
"state_sync_interval": "1m0s",
"ipfs_sync_interval": "2m10s",
"replication_factor": -1,
"monitor_ping_interval": "15s"
},
"consensus": {
"raft": {
"heartbeat_timeout": "1s",
"election_timeout": "1s",
"commit_timeout": "50ms",
"max_append_entries": 64,
"trailing_logs": 10240,
"snapshot_interval": "2m0s",
"snapshot_threshold": 8192,
"leader_lease_timeout": "500ms"
}
},
"api": {
"restapi": {
"listen_multiaddress": "/ip4/127.0.0.1/tcp/9094",
"read_timeout": "30s",
"read_header_timeout": "5s",
"write_timeout": "1m0s",
"idle_timeout": "2m0s"
}
},
"ipfs_connector": {
"ipfshttp": {
"proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095",
"node_multiaddress": "/ip4/127.0.0.1/tcp/5001",
"connect_swarms_delay": "7s",
"proxy_read_timeout": "10m0s",
"proxy_read_header_timeout": "5s",
"proxy_write_timeout": "10m0s",
"proxy_idle_timeout": "1m0s"
}
},
"monitor": {
"monbasic": {
"check_interval": "15s"
}
},
"informer": {
"disk": {
"metric_ttl": "30s",
"metric_type": "freespace"
},
"numpin": {
"metric_ttl": "10s"
}
}
}
```
This new format aims to be easily extensible per component. As such,
it already surfaces quite a few new options which were hardcoded
before.
Additionally, since Go API have changed, some redundant methods have been
removed and small refactoring has happened to take advantage of the new
way.
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>
2017-10-11 18:23:03 +00:00
|
|
|
func newTLSConfig(certFile, keyFile string) (*tls.Config, error) {
|
|
|
|
cert, err := tls.LoadX509KeyPair(certFile, keyFile)
|
|
|
|
if err != nil {
|
|
|
|
return nil, errors.New("Error loading TLS certficate/key: " + err.Error())
|
|
|
|
}
|
|
|
|
// based on https://github.com/denji/golang-tls
|
|
|
|
return &tls.Config{
|
|
|
|
MinVersion: tls.VersionTLS12,
|
|
|
|
CurvePreferences: []tls.CurveID{tls.CurveP521, tls.CurveP384, tls.CurveP256},
|
|
|
|
PreferServerCipherSuites: true,
|
|
|
|
CipherSuites: []uint16{
|
|
|
|
tls.TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,
|
|
|
|
tls.TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA,
|
|
|
|
tls.TLS_RSA_WITH_AES_256_GCM_SHA384,
|
|
|
|
tls.TLS_RSA_WITH_AES_256_CBC_SHA,
|
|
|
|
},
|
|
|
|
Certificates: []tls.Certificate{cert},
|
|
|
|
}, nil
|
|
|
|
}
|