ipfs-cluster/config/util.go

116 lines
2.3 KiB
Go
Raw Normal View History

Issue #162: Rework configuration format The following commit reimplements ipfs-cluster configuration under the following premises: * Each component is initialized with a configuration object defined by its module * Each component decides how the JSON representation of its configuration looks like * Each component parses and validates its own configuration * Each component exposes its own defaults * Component configurations are make the sections of a central JSON configuration file (which replaces the current JSON format) * Component configurations implement a common interface (config.ComponentConfig) with a set of common operations * The central configuration file is managed by a config.ConfigManager which: * Registers ComponentConfigs * Assigns the correspondent sections from the JSON file to each component and delegates the parsing * Delegates the JSON generation for each section * Can be notified when the configuration is updated and must be saved to disk The new service.json would then look as follows: ```json { "cluster": { "id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2", "private_key": "<...>", "secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786", "peers": [], "bootstrap": [], "leave_on_shutdown": false, "listen_multiaddress": "/ip4/0.0.0.0/tcp/9096", "state_sync_interval": "1m0s", "ipfs_sync_interval": "2m10s", "replication_factor": -1, "monitor_ping_interval": "15s" }, "consensus": { "raft": { "heartbeat_timeout": "1s", "election_timeout": "1s", "commit_timeout": "50ms", "max_append_entries": 64, "trailing_logs": 10240, "snapshot_interval": "2m0s", "snapshot_threshold": 8192, "leader_lease_timeout": "500ms" } }, "api": { "restapi": { "listen_multiaddress": "/ip4/127.0.0.1/tcp/9094", "read_timeout": "30s", "read_header_timeout": "5s", "write_timeout": "1m0s", "idle_timeout": "2m0s" } }, "ipfs_connector": { "ipfshttp": { "proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095", "node_multiaddress": "/ip4/127.0.0.1/tcp/5001", "connect_swarms_delay": "7s", "proxy_read_timeout": "10m0s", "proxy_read_header_timeout": "5s", "proxy_write_timeout": "10m0s", "proxy_idle_timeout": "1m0s" } }, "monitor": { "monbasic": { "check_interval": "15s" } }, "informer": { "disk": { "metric_ttl": "30s", "metric_type": "freespace" }, "numpin": { "metric_ttl": "10s" } } } ``` This new format aims to be easily extensible per component. As such, it already surfaces quite a few new options which were hardcoded before. Additionally, since Go API have changed, some redundant methods have been removed and small refactoring has happened to take advantage of the new way. License: MIT Signed-off-by: Hector Sanjuan <hector@protocol.ai>
2017-10-11 18:23:03 +00:00
package config
import (
"encoding/json"
"fmt"
Issue #162: Rework configuration format The following commit reimplements ipfs-cluster configuration under the following premises: * Each component is initialized with a configuration object defined by its module * Each component decides how the JSON representation of its configuration looks like * Each component parses and validates its own configuration * Each component exposes its own defaults * Component configurations are make the sections of a central JSON configuration file (which replaces the current JSON format) * Component configurations implement a common interface (config.ComponentConfig) with a set of common operations * The central configuration file is managed by a config.ConfigManager which: * Registers ComponentConfigs * Assigns the correspondent sections from the JSON file to each component and delegates the parsing * Delegates the JSON generation for each section * Can be notified when the configuration is updated and must be saved to disk The new service.json would then look as follows: ```json { "cluster": { "id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2", "private_key": "<...>", "secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786", "peers": [], "bootstrap": [], "leave_on_shutdown": false, "listen_multiaddress": "/ip4/0.0.0.0/tcp/9096", "state_sync_interval": "1m0s", "ipfs_sync_interval": "2m10s", "replication_factor": -1, "monitor_ping_interval": "15s" }, "consensus": { "raft": { "heartbeat_timeout": "1s", "election_timeout": "1s", "commit_timeout": "50ms", "max_append_entries": 64, "trailing_logs": 10240, "snapshot_interval": "2m0s", "snapshot_threshold": 8192, "leader_lease_timeout": "500ms" } }, "api": { "restapi": { "listen_multiaddress": "/ip4/127.0.0.1/tcp/9094", "read_timeout": "30s", "read_header_timeout": "5s", "write_timeout": "1m0s", "idle_timeout": "2m0s" } }, "ipfs_connector": { "ipfshttp": { "proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095", "node_multiaddress": "/ip4/127.0.0.1/tcp/5001", "connect_swarms_delay": "7s", "proxy_read_timeout": "10m0s", "proxy_read_header_timeout": "5s", "proxy_write_timeout": "10m0s", "proxy_idle_timeout": "1m0s" } }, "monitor": { "monbasic": { "check_interval": "15s" } }, "informer": { "disk": { "metric_ttl": "30s", "metric_type": "freespace" }, "numpin": { "metric_ttl": "10s" } } } ``` This new format aims to be easily extensible per component. As such, it already surfaces quite a few new options which were hardcoded before. Additionally, since Go API have changed, some redundant methods have been removed and small refactoring has happened to take advantage of the new way. License: MIT Signed-off-by: Hector Sanjuan <hector@protocol.ai>
2017-10-11 18:23:03 +00:00
"time"
)
// Saver implements common functionality useful for ComponentConfigs
type Saver struct {
save chan struct{}
BaseDir string
}
// NotifySave signals the SaveCh() channel in a non-blocking fashion.
func (sv *Saver) NotifySave() {
if sv.save == nil {
sv.save = make(chan struct{}, 10)
Issue #162: Rework configuration format The following commit reimplements ipfs-cluster configuration under the following premises: * Each component is initialized with a configuration object defined by its module * Each component decides how the JSON representation of its configuration looks like * Each component parses and validates its own configuration * Each component exposes its own defaults * Component configurations are make the sections of a central JSON configuration file (which replaces the current JSON format) * Component configurations implement a common interface (config.ComponentConfig) with a set of common operations * The central configuration file is managed by a config.ConfigManager which: * Registers ComponentConfigs * Assigns the correspondent sections from the JSON file to each component and delegates the parsing * Delegates the JSON generation for each section * Can be notified when the configuration is updated and must be saved to disk The new service.json would then look as follows: ```json { "cluster": { "id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2", "private_key": "<...>", "secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786", "peers": [], "bootstrap": [], "leave_on_shutdown": false, "listen_multiaddress": "/ip4/0.0.0.0/tcp/9096", "state_sync_interval": "1m0s", "ipfs_sync_interval": "2m10s", "replication_factor": -1, "monitor_ping_interval": "15s" }, "consensus": { "raft": { "heartbeat_timeout": "1s", "election_timeout": "1s", "commit_timeout": "50ms", "max_append_entries": 64, "trailing_logs": 10240, "snapshot_interval": "2m0s", "snapshot_threshold": 8192, "leader_lease_timeout": "500ms" } }, "api": { "restapi": { "listen_multiaddress": "/ip4/127.0.0.1/tcp/9094", "read_timeout": "30s", "read_header_timeout": "5s", "write_timeout": "1m0s", "idle_timeout": "2m0s" } }, "ipfs_connector": { "ipfshttp": { "proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095", "node_multiaddress": "/ip4/127.0.0.1/tcp/5001", "connect_swarms_delay": "7s", "proxy_read_timeout": "10m0s", "proxy_read_header_timeout": "5s", "proxy_write_timeout": "10m0s", "proxy_idle_timeout": "1m0s" } }, "monitor": { "monbasic": { "check_interval": "15s" } }, "informer": { "disk": { "metric_ttl": "30s", "metric_type": "freespace" }, "numpin": { "metric_ttl": "10s" } } } ``` This new format aims to be easily extensible per component. As such, it already surfaces quite a few new options which were hardcoded before. Additionally, since Go API have changed, some redundant methods have been removed and small refactoring has happened to take advantage of the new way. License: MIT Signed-off-by: Hector Sanjuan <hector@protocol.ai>
2017-10-11 18:23:03 +00:00
}
// Non blocking, in case no one's listening
select {
case sv.save <- struct{}{}:
default:
logger.Warning("configuration save channel full")
Issue #162: Rework configuration format The following commit reimplements ipfs-cluster configuration under the following premises: * Each component is initialized with a configuration object defined by its module * Each component decides how the JSON representation of its configuration looks like * Each component parses and validates its own configuration * Each component exposes its own defaults * Component configurations are make the sections of a central JSON configuration file (which replaces the current JSON format) * Component configurations implement a common interface (config.ComponentConfig) with a set of common operations * The central configuration file is managed by a config.ConfigManager which: * Registers ComponentConfigs * Assigns the correspondent sections from the JSON file to each component and delegates the parsing * Delegates the JSON generation for each section * Can be notified when the configuration is updated and must be saved to disk The new service.json would then look as follows: ```json { "cluster": { "id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2", "private_key": "<...>", "secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786", "peers": [], "bootstrap": [], "leave_on_shutdown": false, "listen_multiaddress": "/ip4/0.0.0.0/tcp/9096", "state_sync_interval": "1m0s", "ipfs_sync_interval": "2m10s", "replication_factor": -1, "monitor_ping_interval": "15s" }, "consensus": { "raft": { "heartbeat_timeout": "1s", "election_timeout": "1s", "commit_timeout": "50ms", "max_append_entries": 64, "trailing_logs": 10240, "snapshot_interval": "2m0s", "snapshot_threshold": 8192, "leader_lease_timeout": "500ms" } }, "api": { "restapi": { "listen_multiaddress": "/ip4/127.0.0.1/tcp/9094", "read_timeout": "30s", "read_header_timeout": "5s", "write_timeout": "1m0s", "idle_timeout": "2m0s" } }, "ipfs_connector": { "ipfshttp": { "proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095", "node_multiaddress": "/ip4/127.0.0.1/tcp/5001", "connect_swarms_delay": "7s", "proxy_read_timeout": "10m0s", "proxy_read_header_timeout": "5s", "proxy_write_timeout": "10m0s", "proxy_idle_timeout": "1m0s" } }, "monitor": { "monbasic": { "check_interval": "15s" } }, "informer": { "disk": { "metric_ttl": "30s", "metric_type": "freespace" }, "numpin": { "metric_ttl": "10s" } } } ``` This new format aims to be easily extensible per component. As such, it already surfaces quite a few new options which were hardcoded before. Additionally, since Go API have changed, some redundant methods have been removed and small refactoring has happened to take advantage of the new way. License: MIT Signed-off-by: Hector Sanjuan <hector@protocol.ai>
2017-10-11 18:23:03 +00:00
}
}
// SaveCh returns a channel which is signaled when a component wants
// to persist its configuration
func (sv *Saver) SaveCh() <-chan struct{} {
if sv.save == nil {
sv.save = make(chan struct{})
}
return sv.save
}
// SetBaseDir is a setter for BaseDir and implements
// part of the ComponentConfig interface.
func (sv *Saver) SetBaseDir(dir string) {
sv.BaseDir = dir
}
// DefaultJSONMarshal produces pretty JSON with 2-space indentation
func DefaultJSONMarshal(v interface{}) ([]byte, error) {
bs, err := json.MarshalIndent(v, "", " ")
if err != nil {
return nil, err
}
return bs, nil
}
// SetIfNotDefault sets dest to the value of src if src is not the default
// value of the type.
Issue #162: Rework configuration format The following commit reimplements ipfs-cluster configuration under the following premises: * Each component is initialized with a configuration object defined by its module * Each component decides how the JSON representation of its configuration looks like * Each component parses and validates its own configuration * Each component exposes its own defaults * Component configurations are make the sections of a central JSON configuration file (which replaces the current JSON format) * Component configurations implement a common interface (config.ComponentConfig) with a set of common operations * The central configuration file is managed by a config.ConfigManager which: * Registers ComponentConfigs * Assigns the correspondent sections from the JSON file to each component and delegates the parsing * Delegates the JSON generation for each section * Can be notified when the configuration is updated and must be saved to disk The new service.json would then look as follows: ```json { "cluster": { "id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2", "private_key": "<...>", "secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786", "peers": [], "bootstrap": [], "leave_on_shutdown": false, "listen_multiaddress": "/ip4/0.0.0.0/tcp/9096", "state_sync_interval": "1m0s", "ipfs_sync_interval": "2m10s", "replication_factor": -1, "monitor_ping_interval": "15s" }, "consensus": { "raft": { "heartbeat_timeout": "1s", "election_timeout": "1s", "commit_timeout": "50ms", "max_append_entries": 64, "trailing_logs": 10240, "snapshot_interval": "2m0s", "snapshot_threshold": 8192, "leader_lease_timeout": "500ms" } }, "api": { "restapi": { "listen_multiaddress": "/ip4/127.0.0.1/tcp/9094", "read_timeout": "30s", "read_header_timeout": "5s", "write_timeout": "1m0s", "idle_timeout": "2m0s" } }, "ipfs_connector": { "ipfshttp": { "proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095", "node_multiaddress": "/ip4/127.0.0.1/tcp/5001", "connect_swarms_delay": "7s", "proxy_read_timeout": "10m0s", "proxy_read_header_timeout": "5s", "proxy_write_timeout": "10m0s", "proxy_idle_timeout": "1m0s" } }, "monitor": { "monbasic": { "check_interval": "15s" } }, "informer": { "disk": { "metric_ttl": "30s", "metric_type": "freespace" }, "numpin": { "metric_ttl": "10s" } } } ``` This new format aims to be easily extensible per component. As such, it already surfaces quite a few new options which were hardcoded before. Additionally, since Go API have changed, some redundant methods have been removed and small refactoring has happened to take advantage of the new way. License: MIT Signed-off-by: Hector Sanjuan <hector@protocol.ai>
2017-10-11 18:23:03 +00:00
// dest must be a pointer.
func SetIfNotDefault(src interface{}, dest interface{}) {
switch src.(type) {
case time.Duration:
t := src.(time.Duration)
if t != 0 {
*dest.(*time.Duration) = t
}
case string:
str := src.(string)
if str != "" {
*dest.(*string) = str
}
case uint64:
n := src.(uint64)
if n != 0 {
*dest.(*uint64) = n
}
case int:
n := src.(int)
if n != 0 {
*dest.(*int) = n
}
case bool:
b := src.(bool)
if b {
*dest.(*bool) = b
}
}
}
// DurationOpt provides a datatype to use with ParseDurations
type DurationOpt struct {
// The duration we need to parse
Duration string
// Where to store the result
Dst *time.Duration
// A variable name associated to it for helpful errors.
Name string
}
// ParseDurations takes a time.Duration src and saves it to the given dst.
func ParseDurations(component string, args ...*DurationOpt) error {
for _, arg := range args {
if arg.Duration == "" {
*arg.Dst = 0
continue
}
t, err := time.ParseDuration(arg.Duration)
if err != nil {
return fmt.Errorf(
"error parsing %s.%s: %s",
component,
arg.Name,
err,
)
}
*arg.Dst = t
}
return nil
}