These two changes were made to the ipfshttp connector already.
First, node_multiaddress should not be pre-resolved, only using the first result of the resolution.
Second, we should support node_multiaddresses that are pointing to unix sockets, as the kubo daemon can listen to requests that way and
it is better than tcp for local requests.
This commit introduces an api.Cid type and replaces the usage of cid.Cid
everywhere.
The main motivation here is to override MarshalJSON so that Cids are
JSON-ified as '"Qm...."' instead of '{ "/": "Qm....." }', as this "ipld"
representation of IDs is horrible to work with, and our APIs are not issuing
IPLD objects to start with.
Unfortunately, there is no way to do this cleanly, and the best way is to just
switch everything to our own type.
This commit fixes#810 and adds block streaming to the final destinations when
adding. This should add major performance gains when adding data to clusters.
Before, everytime cluster issued a block, it was broadcasted individually to
all destinations (new libp2p stream), where it was block/put to IPFS (a single
block/put http roundtrip per block).
Now, blocks are streamed all the way from the adder module to the ipfs daemon,
by making every block as it arrives a single part in a multipart block/put
request.
Before, block-broadcast needed to wait for all destinations to finish in order
to process the next block. Now, buffers allow some destinations to be faster
than others while sending and receiving blocks.
Before, if a block put request failed to be broadcasted everywhere, an error
would happen at that moment.
Now, we keep streaming until the end and only then report any errors. The
operation succeeds as long as at least one stream finished successfully.
Errors block/putting to IPFS will not abort streams. Instead, subsequent
blocks are retried with a new request, although the method will return an
error when the stream finishes if there were errors at any point.
This commit continues the work of taking advantage of the streaming
capabilities in go-libp2p-gorpc by improving the ipfsconnector and pintracker
components.
StatusAll and RecoverAll methods are now streaming methods, with the REST API
output changing accordingly to produce a stream of GlobalPinInfos rather than
a json array.
pin/ls request to the ipfs daemon now use ?stream=true and avoid having to
load the full pinset map on memory. StatusAllLocal and RecoverAllLocal
requests to the pin tracker stream all the way and no longer store the full
pinset, and the full PinInfo status slice before sending it out.
We have additionally switched to a pattern where streaming methods receive the
channel as an argument, allowing the caller to decide on whether to launch a
goroutine, do buffering etc.
This commit introduces the new go-libp2p-gorpc streaming capabilities for
Cluster. The main aim is to work towards heavily reducing memory usage when
working with very large pinsets.
As a side-effect, it takes the chance to revampt all types for all public
methods so that pointers to static what should be static objects are not used
anymore. This should heavily reduce heap allocations and GC activity.
The main change is that state.List now returns a channel from which to read
the pins, rather than pins being all loaded into a huge slice.
Things reading pins have been all updated to iterate on the channel rather
than on the slice. The full pinset is no longer fully loaded onto memory for
things that run regularly like StateSync().
Additionally, the /allocations endpoint of the rest API no longer returns an
array of pins, but rather streams json-encoded pin objects directly. This
change has extended to the restapi client (which puts pins into a channel as
they arrive) and to ipfs-cluster-ctl.
There are still pending improvements like StatusAll() calls which should also
stream responses, and specially BlockPut calls which should stream blocks
directly into IPFS on a single call.
These are coming up in future commits.
The errors returned by the IPFS Proxy API are not understood by IPFS.
This was caused by go-ipfs-cmds setting an API error format which requires the
errors to have a type: "error" field.
This commit brings this up to speed.
Fixes#1286. Some AddedOutput objects carry an undefined CID. This was getting
stringified as 'b', making the proxy responses include this rather than
skipping setting the field.
* Libp2p protectors no longer needed, use PSK directly
* Generate cluster 32-byte secret here (helper gone from pnet)
* Switch to go-log/v2 in all places
* DHT bootstrapping not needed. Adjust DHT options for tests.
* Do not rely on dissappeared CidToDsKey and DsKeyToCid functions fro dshelp.
* Disable QUIC (does not support private networks)
* Fix tests: autodiscovery started working properly
* add ipv6 listening addresses to the default config
* ipfsproxy: support multiple listeners. Add default ipv6.
* mm
* restapi: support multiple listen addresses. enable ipv6
* cluster_config: format default listen addresses
* commands: update for multiple listeners. Fix randomports for udp and ipv6.
* ipfs-cluster-service: fix randomports test
* multiple listeners: fix remaining tests
* golint
* Disable ipv6 in defaults
It is not supported by docker by default. It is not supported in travis-CI
build environments. User can enable it now manually.
* proxy: disable ipv6 in test
* ipfshttp: fix test
Co-authored-by: @RubenKelevra <cyrond@gmail.com>
This introduces a pin/update operation which allows to Pin a new item to
cluster indicating that said pin is an update to an already-existing pin.
When this is the case, all the configuration for the existing pin is copied to
the new one (including allocations). The IPFS connector will then trigger
pin/update directly in IPFS, allowing an efficient pinning based on
DAG-differences. Since the allocations where the same for both pins,
the pin/update can proceed.
PinUpdate does not unpin the previous pin (it is not possible to do this
atomically in cluster like it happens in IPFS). The user can manually do it
after the pin/update is done.
Internally, after a lot of deliberations on what the optimal way for this is,
I opted for adding a `PinUpdate` option to the `PinOptions` type (carries the
CID to update from). In order to carry this option from the REST API to the
IPFS Connector, it is serialized in the Protobuf (and stored in the
datastore). There is no other way to do this in a simple fashion since the Pin
object is piece of information that is sent around.
Additionally, making it a PinOption plays well with the Pin/PinPath APIs which
need little changes. Effectively, you are pinning a new thing. You are just
indicating that it should be configured from an existing one.
Fixes#732
* Improve pin/unpin method signatures:
These changes the following Cluster Go API methods:
* -> Cluster.Pin(ctx, cid, options) (pin, error)
* -> Cluster.Unpin(ctx, cid) (pin, error)
* -> Cluster.PinPath(ctx, path, opts) (pin,error)
Pin and Unpin now return the pinned object.
The signature of the methods now matches that of the API Client, is clearer as
to what options the user can set and is aligned with PinPath, UnpinPath, which
returned pin methods.
The REST API now returns the Pinned/Unpinned object rather than 204-Accepted.
This was necessary for a cleaner pin/update approach, which I'm working on in
another branch.
Most of the changes here are updating tests to the new signatures
* Adapt load-balancing client to new Pin/Unpin signatures
* cluster.go: Fix typo
Co-Authored-By: Kishan Sagathiya <kishansagathiya@gmail.com>
* cluster.go: Fix typo
Co-Authored-By: Kishan Sagathiya <kishansagathiya@gmail.com>
I had thought of this for a very long time but there were no compelling
reasons to do it. Specifying RPC endpoint permissions becomes however
significantly nicer if each Component is a different RPC Service. This also
fixes some naming issues like having to prefix methods with the component name
to separate them from methods named in the same way in some other component
(Pin and IPFSPin).
The IPFS pin/update endpoint takes two arguments and usually
unpins the first and pins the second. It is a bit more efficient
to do it in a single operation than two separate ones.
This will make the proxy endpoint hijack pin/update requests.
First, the FROM pin is fetched from the state. If present, we
set the options (replication factors, actual allocations) from
that pin to the new one. Then we pin the TO item and proceed
to unpin the FROM item when `unpin` is not false.
We need to support path resolving, just like IPFS, therefore
it was necessary to expose IPFSResolve() via RPC.
This adds a new "crdt" consensus component using go-ds-crdt.
This implies several refactors to fully make cluster consensus-component
independent:
* Delete mapstate and fully adopt dsstate (after people have migrated).
* Return errors from state methods rather than ignoring them.
* Add a new "datastore" modules so that we can configure datastores in the
main configuration like other components.
* Let the consensus components fully define the "state.State". Thus, they do
not receive the state, they receive the storage where we put the state (a
go-datastore).
* Allow to customize how the monitor component obtains Peers() (the current
peerset), including avoiding using the current peerset. At the moment the
crdt consensus uses the monitoring component to define the current peerset.
Therefore the monitor component cannot rely on the consensus component to
produce a peerset.
* Re-factor/re-implementation of "ipfs-cluster-service state"
operations. Includes the dissapearance of the "migrate" one.
The CRDT consensus component defines creates a crdt-datastore (with ipfs-lite)
and uses it to intitialize a dssate. Thus the crdt-store is elegantly
wrapped. Any modifications to the state get automatically replicated to other
peers. We store all the CRDT DAG blocks in the local datastore.
The consensus components only expose a ReadOnly state, as any modifications to
the shared state should happen through them.
DHT and PubSub facilities must now be created outside of Cluster and passed in
so they can be re-used by different components.
This was a leftover. For consisency, all CIDs coming out of the API
should have the canonical cid form ( { "/": "cid" } ), otherwise
we are inconsistent.
This takes advantange of the latest features in go-cid, peer.ID and
go-multiaddr and makes the Go types serializable by default.
This means we no longer need to copy between Pin <-> PinSerial, or ID <->
IDSerial etc. We can now efficiently binary-encode these types using short
field keys and without parsing/stringifying (in many cases it just a cast).
We still get the same json output as before (with minor modifications for
Cids).
This should greatly improve Cluster performance and memory usage when dealing
with large collections of items.
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>
Get jsonConfig from Config, apply env vars to it, load jsonConfig
back into Config.
License: MIT
Signed-off-by: Robert Ignat <robert.ignat91@gmail.com>
* cluster and restapi configs can also get values from environment variables
* other config components don't read any values from the environment
License: MIT
Signed-off-by: Robert Ignat <robert.ignat91@gmail.com>
