The extractCid function was added to enable the extraction of
a cid argument from either the url path or query string.
This puts the proxy behaviour on par with the current IPFS API.
The function does rely on the fact that ipfs-cluster doesn't
intercept any command that has more than one subcommand.
If that changes, this function will have to be updated.
License: MIT
Signed-off-by: Adrian Lanzafame <adrianlanzafame92@gmail.com>
This fixes#326. It adds a new `pin_method` configuration option to the
`ipfshttp` component allows to configure it to perform `refs -r <cid>` before
the `pin/add` call. By fetching content before pinning, we don't have
a global lock in place, and we can have several pin-requests to
ipfs in parallel.
It also adds a `concurrent_pins` option to the pin tracker, which
launches more pin workers so it can potentially trigger more pins at
the same time. This is a minimal intervention in the pintracker as #308
is still pending.
Documentation for the configuration file has been updated.
License: MIT
Signed-off-by: Hector Sanjuan <code@hector.link>
Added go tests
Refactored cluster connect graph to new file
Refactored dot file printing to new repo
Fixed code climate issues
Added sharness test
License: MIT
Signed-off-by: Wyatt Daviau <wdaviau@cs.stanford.edu>
added ConnectGraph type and serialization
added cli command hitting cluster api
added cluster api client method + endpoint calling into rpc
added rpc calling into main cluster component
added clustercomponent's function to collect ConnectGraph
added functionality in ipfsconn to retrieve ipfs swarm peers
added dot file printing given ConnectGraphSerial
License: MIT
Signed-off-by: Wyatt Daviau <wdaviau@cs.stanford.edu>
Better error messages in test-lib init functions and ipfshttp
Cleanup functions are now called after every test file
License: MIT
Signed-off-by: Wyatt Daviau <wdaviau@cs.stanford.edu>
SwarmConnect on the ipfs connector calls rpc Peers() which
requests IDs for every peer member. If that peer member
is booting, it might get the request after RPC is setup
but before consensus is initialized. In which case
a panic happens. Probability that this happens is small, but still.
Also increase the connect swarms delay to 30 seconds, which
should be a bit longer than the default wait_for_leader timeout,
otherwise we might connect swarms while there's not even a leader.
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>
Up to now, we hardcoded progress to "false" in the proxy, regardless
of what the original request said. We now leave it as it is, and
just ignore any progress updates when processing the response.
Since the response is buffered and sent back all together, they are
still useless, but at least the clients (ipfs cli) won't show a 0%
progress bar when successfully adding a file.
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>
The following commit reimplements ipfs-cluster configuration under
the following premises:
* Each component is initialized with a configuration object
defined by its module
* Each component decides how the JSON representation of its
configuration looks like
* Each component parses and validates its own configuration
* Each component exposes its own defaults
* Component configurations are make the sections of a
central JSON configuration file (which replaces the current
JSON format)
* Component configurations implement a common interface
(config.ComponentConfig) with a set of common operations
* The central configuration file is managed by a
config.ConfigManager which:
* Registers ComponentConfigs
* Assigns the correspondent sections from the JSON file to each
component and delegates the parsing
* Delegates the JSON generation for each section
* Can be notified when the configuration is updated and must be
saved to disk
The new service.json would then look as follows:
```json
{
"cluster": {
"id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2",
"private_key": "<...>",
"secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786",
"peers": [],
"bootstrap": [],
"leave_on_shutdown": false,
"listen_multiaddress": "/ip4/0.0.0.0/tcp/9096",
"state_sync_interval": "1m0s",
"ipfs_sync_interval": "2m10s",
"replication_factor": -1,
"monitor_ping_interval": "15s"
},
"consensus": {
"raft": {
"heartbeat_timeout": "1s",
"election_timeout": "1s",
"commit_timeout": "50ms",
"max_append_entries": 64,
"trailing_logs": 10240,
"snapshot_interval": "2m0s",
"snapshot_threshold": 8192,
"leader_lease_timeout": "500ms"
}
},
"api": {
"restapi": {
"listen_multiaddress": "/ip4/127.0.0.1/tcp/9094",
"read_timeout": "30s",
"read_header_timeout": "5s",
"write_timeout": "1m0s",
"idle_timeout": "2m0s"
}
},
"ipfs_connector": {
"ipfshttp": {
"proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095",
"node_multiaddress": "/ip4/127.0.0.1/tcp/5001",
"connect_swarms_delay": "7s",
"proxy_read_timeout": "10m0s",
"proxy_read_header_timeout": "5s",
"proxy_write_timeout": "10m0s",
"proxy_idle_timeout": "1m0s"
}
},
"monitor": {
"monbasic": {
"check_interval": "15s"
}
},
"informer": {
"disk": {
"metric_ttl": "30s",
"metric_type": "freespace"
},
"numpin": {
"metric_ttl": "10s"
}
}
}
```
This new format aims to be easily extensible per component. As such,
it already surfaces quite a few new options which were hardcoded
before.
Additionally, since Go API have changed, some redundant methods have been
removed and small refactoring has happened to take advantage of the new
way.
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>
I have updated API endpoints to be /allocations rather than /pinlinst
It's more self-explanatory.
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>
The disk informer uses "ipfs repo stat" to fetch the RepoSize value and
uses it as a metric.
The numpinalloc allocator is now a generalized ascendalloc which
sorts metrics in ascending order and return the ones with lowest
values.
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>