I've modified the peer identifier to be 'peername'. I've also
modified the TestLoadJSON to check that it is correctly read from
config and set to a default if empty.
Also added 'peername' fields to configurations for various tests.
I renamed Hostname to simply Name as to not imply relation to DNS.
Removed quotes from formatter, used helper function setting config,
and added defensive error check.
I added a "hostname" property to a node's configuration file. Its
value defaults to the hostname provided by the OS, but can be
modified to anything beside an empty string in the config file.
The "hostname" was added to the output of the "id" call. Thus, peer
hostnames are available when listing peers.
ipfs-cluster-service now has a migration subcommand that upgrades
persistant state snapshots with an out-of-date format version to the
newest version of raft state. If all cluster members shutdown with
consistent state, upgrade ipfs-cluster, and run the state upgrade command,
the new version of cluster will be compatible with persistent storage.
ipfs-cluster now validates its persistent state upon loading it and exits
with a clear error in the case the state format version is not up to date.
Raft snapshotting is enforced on all shutdowns and the json backup is no
longer run. This commit makes use of recent changes to libp2p-raft
allowing raft states to implement their own marshaling strategies. Now
mapstate handles the logic for its (de)serialization. In the interest of
supporting various potential upgrade formats the state serialization
begins with a varint (right now one byte) describing the version.
Some go tests are modified and a go test is added to cover new ipfs-cluster
raft snapshot reading functions. Sharness tests are added to cover the
state upgrade command.
make sure we save a new config if the new peerset
is different than the one in the configuration at
boot.
Hopefully this fixes a race condition in PeerAdd test
License: MIT
Signed-off-by: Hector Sanjuan <code@hector.link>
SwarmConnect on the ipfs connector calls rpc Peers() which
requests IDs for every peer member. If that peer member
is booting, it might get the request after RPC is setup
but before consensus is initialized. In which case
a panic happens. Probability that this happens is small, but still.
Also increase the connect swarms delay to 30 seconds, which
should be a bit longer than the default wait_for_leader timeout,
otherwise we might connect swarms while there's not even a leader.
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>
This is what it was likely causing PeerRemove tests to fail randomly
but very often. We cancelled the Cluster context before shutting down
the Consensus component. This killed networking and aborted
the peer remove operations when the leader is removing itself.
As a result, it would error with "leadership lost", which would
trigger a retry which would set the final error to "context cancelled"
because the shutdown of the consensus component proceeds during the
retry, cancelling the consensus context.
This is not only affecting tests, it might affected operations when
running cluster.
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>
Sometimes tests fail because the returned api.ID for a new peer
does not include the current cluster peers. This is because the
new peerset has not yet be commited in the new peer at the time
of the request.
This commit retries obtaining the request until the correct peerset
comes in, or gives up after two seconds retrying.
Rather than the tests failing, note that the ID returned it is very
user-facing and should contain the current cluster peers after adding,
and not the former peerset, at least while peerAdd operation is allowed.
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>
It seems more logical that the new peer should know how to contact
everyone before it needs to start doing it, but it probably does not
matter much. Still, more logical.
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>
This change removes the duplicities of the PeerManager component:
* No more commiting PeerAdd and PeerRm log entries
* The Raft peer set is the source of truth
* Basic broadcasting is used to communicate peer multiaddresses
in the cluster
* A peer can only be added in a healthy cluster
* A peer can be removed from any cluster which can still commit
* This also adds support for multiple multiaddresses per peer
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>
The main differences is that the new version of Raft is more strict
about starting raft peers which already contain configurations.
For a start, cluster will fail to start if the configured cluster
peers are different from the Raft peers. The user will have to
manually cleanup Raft (TODO: an ipfs-cluster-service command for it).
Additionally, this commit adds extra options to the consensus/raft
configuration section, adds tests and improves existing ones and
improves certain code sections.
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>
There might be a case where the program is terminated before
configuration is saved.
Also, avoid calling save() multiple times on shutdowns.
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>
The following commit reimplements ipfs-cluster configuration under
the following premises:
* Each component is initialized with a configuration object
defined by its module
* Each component decides how the JSON representation of its
configuration looks like
* Each component parses and validates its own configuration
* Each component exposes its own defaults
* Component configurations are make the sections of a
central JSON configuration file (which replaces the current
JSON format)
* Component configurations implement a common interface
(config.ComponentConfig) with a set of common operations
* The central configuration file is managed by a
config.ConfigManager which:
* Registers ComponentConfigs
* Assigns the correspondent sections from the JSON file to each
component and delegates the parsing
* Delegates the JSON generation for each section
* Can be notified when the configuration is updated and must be
saved to disk
The new service.json would then look as follows:
```json
{
"cluster": {
"id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2",
"private_key": "<...>",
"secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786",
"peers": [],
"bootstrap": [],
"leave_on_shutdown": false,
"listen_multiaddress": "/ip4/0.0.0.0/tcp/9096",
"state_sync_interval": "1m0s",
"ipfs_sync_interval": "2m10s",
"replication_factor": -1,
"monitor_ping_interval": "15s"
},
"consensus": {
"raft": {
"heartbeat_timeout": "1s",
"election_timeout": "1s",
"commit_timeout": "50ms",
"max_append_entries": 64,
"trailing_logs": 10240,
"snapshot_interval": "2m0s",
"snapshot_threshold": 8192,
"leader_lease_timeout": "500ms"
}
},
"api": {
"restapi": {
"listen_multiaddress": "/ip4/127.0.0.1/tcp/9094",
"read_timeout": "30s",
"read_header_timeout": "5s",
"write_timeout": "1m0s",
"idle_timeout": "2m0s"
}
},
"ipfs_connector": {
"ipfshttp": {
"proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095",
"node_multiaddress": "/ip4/127.0.0.1/tcp/5001",
"connect_swarms_delay": "7s",
"proxy_read_timeout": "10m0s",
"proxy_read_header_timeout": "5s",
"proxy_write_timeout": "10m0s",
"proxy_idle_timeout": "1m0s"
}
},
"monitor": {
"monbasic": {
"check_interval": "15s"
}
},
"informer": {
"disk": {
"metric_ttl": "30s",
"metric_type": "freespace"
},
"numpin": {
"metric_ttl": "10s"
}
}
}
```
This new format aims to be easily extensible per component. As such,
it already surfaces quite a few new options which were hardcoded
before.
Additionally, since Go API have changed, some redundant methods have been
removed and small refactoring has happened to take advantage of the new
way.
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>
We no longer set ConsensusDataFolder. We leave it empty (and ommited from the
configuration). When not set, it will take the path from which the configuration
file was read and use an "ipfs-cluster-data" subfolder in that path.
When set, the behaviour is just as before (ensures backwards compatiblity).
This will facilitate re-use of configuration files, for example, when mounting
them inside docker.
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>
We were setting a nil Cid on the PinInfo object for errors.
Cleaned up the logic a bit, and added comments
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>
I have updated API endpoints to be /allocations rather than /pinlinst
It's more self-explanatory.
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>
It turns out they only worked in round seconds. Tests send a metric
every second, so sometimes they were expired right away.
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>
This adds snapshot and restore methods to state and uses the snapshot
one to save a copy of the state when shutting down. Right now, this is
not used for anything else.
Some lines performing a migration, but this is only an idea of how it could
work.
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>
