This commit:
* Does not collect and return changed items when doing StateSync (they are
not used)
* Removes the StateSync RPC method (no longer used)
* Uses tracker.StatusAll() rather than requesting Status on each Cid (should
be faster with upcoming pintracker)
* Does not launch a go-routine to track every item. Track is an async
operation. This likely causes 1000s goroutines to be started with no good
reason.
License: MIT
Signed-off-by: Hector Sanjuan <code@hector.link>
This commit promotes the Consensus component (and Raft) to become a fully
independent thing like other components, passed to NewCluster during
initialization. Cluster (main component) no longer creates the consensus
layer internally. This has triggered a number of breaking changes
that I will explain below.
Motivation: Future work will require the possibility of running Cluster
with a consensus layer that is not Raft. The "consensus" layer is in charge
of maintaining two things:
* The current cluster peerset, as required by the implementation
* The current cluster pinset (shared state)
While the pinset maintenance has always been in the consensus layer, the
peerset maintenance was handled by the main component (starting by the "peers"
key in the configuration) AND the Raft component (internally)
and this generated lots of confusion: if the user edited the peers in the
configuration they would be greeted with an error.
The bootstrap process (adding a peer to an existing cluster) and configuration
key also complicated many things, since the main component did it, but only
when the consensus was initialized and in single peer mode.
In all this we also mixed the peerstore (list of peer addresses in the libp2p
host) with the peerset, when they need not to be linked.
By initializing the consensus layer before calling NewCluster, all the
difficulties in maintaining the current implementation in the same way
have come to light. Thus, the following changes have been introduced:
* Remove "peers" and "bootstrap" keys from the configuration: we no longer
edit or save the configuration files. This was a very bad practice, requiring
write permissions by the process to the file containing the private key and
additionally made things like Puppet deployments of cluster difficult as
configuration would mutate from its initial version. Needless to say all the
maintenance associated to making sure peers and bootstrap had correct values
when peers are bootstrapped or removed. A loud and detailed error message has
been added when staring cluster with an old config, along with instructions on
how to move forward.
* Introduce a PeerstoreFile ("peerstore") which stores peer addresses: in
ipfs, the peerstore is not persisted because it can be re-built from the
network bootstrappers and the DHT. Cluster should probably also allow
discoverability of peers addresses (when not bootstrapping, as in that case
we have it), but in the meantime, we will read and persist the peerstore
addresses for cluster peers in this file, different from the configuration.
Note that dns multiaddresses are now fully supported and no IPs are saved
when we have DNS multiaddresses for a peer.
* The former "peer_manager" code is now a pstoremgr module, providing utilities
to parse, add, list and generally maintain the libp2p host peerstore, including
operations on the PeerstoreFile. This "pstoremgr" can now also be extended to
perform address autodiscovery and other things indepedently from Cluster.
* Create and initialize Raft outside of the main Cluster component: since we
can now launch Raft independently from Cluster, we have more degrees of
freedom. A new "staging" option when creating the object allows a raft peer to
be launched in Staging mode, waiting to be added to a running consensus, and
thus, not electing itself as leader or doing anything like we were doing
before. This additionally allows us to track when the peer has become a
Voter, which only happens when it's caught up with the state, something that
was wonky previously.
* The raft configuration now includes an InitPeerset key, which allows to
provide a peerset for new peers and which is ignored when staging==true. The
whole Raft initialization code is way cleaner and stronger now.
* Cluster peer bootsrapping is now an ipfs-cluster-service feature. The
--bootstrap flag works as before (additionally allowing comma-separated-list
of entries). What bootstrap does, is to initialize Raft with staging == true,
and then call Join in the main cluster component. Only when the Raft peer
transitions to Voter, consensus becomes ready, and cluster becomes Ready.
This is cleaner, works better and is less complex than before (supporting
both flags and config values). We also backup and clean the state whenever
we are boostrapping, automatically
* ipfs-cluster-service no longer runs the daemon. Starting cluster needs
now "ipfs-cluster-service daemon". The daemon specific flags (bootstrap,
alloc) are now flags for the daemon subcommand. Here we mimic ipfs ("ipfs"
does not start the daemon but print help) and pave the path for merging both
service and ctl in the future.
While this brings some breaking changes, it significantly reduces the
complexity of the configuration, the code and most importantly, the
documentation. It should be easier now to explain the user what is the
right way to launch a cluster peer, and more difficult to make mistakes.
As a side effect, the PR also:
* Fixes#381 - peers with dynamic addresses
* Fixes#371 - peers should be Raft configuration option
* Fixes#378 - waitForUpdates may return before state fully synced
* Fixes#235 - config option shadowing (no cfg saves, no need to shadow)
License: MIT
Signed-off-by: Hector Sanjuan <code@hector.link>
to the ipfscluster.IPFSConnector interface and then
to the implementation of that interface in ipfsconn/ipfshttp.
This allows calls from MapPinTracker to cancel requests made
to the local IPFS node.
License: MIT
Signed-off-by: Adrian Lanzafame <adrianlanzafame92@gmail.com>
NewCluster() now takes an optional Host parameter.
The rationale is to allow to re-use an existing libp2p Host
when creating the cluster.
The NewClusterHost method now allows to create a host
with the options used by cluster.
License: MIT
Signed-off-by: Hector Sanjuan <code@hector.link>
Added go tests
Refactored cluster connect graph to new file
Refactored dot file printing to new repo
Fixed code climate issues
Added sharness test
License: MIT
Signed-off-by: Wyatt Daviau <wdaviau@cs.stanford.edu>
This PR replaces ReplicationFactor with ReplicationFactorMax
and ReplicationFactor min.
This allows a CID to be pinned even though the desired
replication factor (max) is not reached, and prevents triggering
re-pinnings when the replication factor has not crossed the
lower threshold (min).
License: MIT
Signed-off-by: Hector Sanjuan <code@hector.link>
This adds API, RPC calls to support RecoverAllLocal() (and expose RecoverLocal()
on the Rest API too). cluster-ctl is updated accordingly.
License: MIT
Signed-off-by: Hector Sanjuan <code@hector.link>
This also generates a default configuration section when it
doesn't exist, so it's backwards compatible.
License: MIT
Signed-off-by: Hector Sanjuan <code@hector.link>
ipfs-cluster-service now has a migration subcommand that upgrades
persistant state snapshots with an out-of-date format version to the
newest version of raft state. If all cluster members shutdown with
consistent state, upgrade ipfs-cluster, and run the state upgrade command,
the new version of cluster will be compatible with persistent storage.
ipfs-cluster now validates its persistent state upon loading it and exits
with a clear error in the case the state format version is not up to date.
Raft snapshotting is enforced on all shutdowns and the json backup is no
longer run. This commit makes use of recent changes to libp2p-raft
allowing raft states to implement their own marshaling strategies. Now
mapstate handles the logic for its (de)serialization. In the interest of
supporting various potential upgrade formats the state serialization
begins with a varint (right now one byte) describing the version.
Some go tests are modified and a go test is added to cover new ipfs-cluster
raft snapshot reading functions. Sharness tests are added to cover the
state upgrade command.
The following commit reimplements ipfs-cluster configuration under
the following premises:
* Each component is initialized with a configuration object
defined by its module
* Each component decides how the JSON representation of its
configuration looks like
* Each component parses and validates its own configuration
* Each component exposes its own defaults
* Component configurations are make the sections of a
central JSON configuration file (which replaces the current
JSON format)
* Component configurations implement a common interface
(config.ComponentConfig) with a set of common operations
* The central configuration file is managed by a
config.ConfigManager which:
* Registers ComponentConfigs
* Assigns the correspondent sections from the JSON file to each
component and delegates the parsing
* Delegates the JSON generation for each section
* Can be notified when the configuration is updated and must be
saved to disk
The new service.json would then look as follows:
```json
{
"cluster": {
"id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2",
"private_key": "<...>",
"secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786",
"peers": [],
"bootstrap": [],
"leave_on_shutdown": false,
"listen_multiaddress": "/ip4/0.0.0.0/tcp/9096",
"state_sync_interval": "1m0s",
"ipfs_sync_interval": "2m10s",
"replication_factor": -1,
"monitor_ping_interval": "15s"
},
"consensus": {
"raft": {
"heartbeat_timeout": "1s",
"election_timeout": "1s",
"commit_timeout": "50ms",
"max_append_entries": 64,
"trailing_logs": 10240,
"snapshot_interval": "2m0s",
"snapshot_threshold": 8192,
"leader_lease_timeout": "500ms"
}
},
"api": {
"restapi": {
"listen_multiaddress": "/ip4/127.0.0.1/tcp/9094",
"read_timeout": "30s",
"read_header_timeout": "5s",
"write_timeout": "1m0s",
"idle_timeout": "2m0s"
}
},
"ipfs_connector": {
"ipfshttp": {
"proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095",
"node_multiaddress": "/ip4/127.0.0.1/tcp/5001",
"connect_swarms_delay": "7s",
"proxy_read_timeout": "10m0s",
"proxy_read_header_timeout": "5s",
"proxy_write_timeout": "10m0s",
"proxy_idle_timeout": "1m0s"
}
},
"monitor": {
"monbasic": {
"check_interval": "15s"
}
},
"informer": {
"disk": {
"metric_ttl": "30s",
"metric_type": "freespace"
},
"numpin": {
"metric_ttl": "10s"
}
}
}
```
This new format aims to be easily extensible per component. As such,
it already surfaces quite a few new options which were hardcoded
before.
Additionally, since Go API have changed, some redundant methods have been
removed and small refactoring has happened to take advantage of the new
way.
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>
I have updated API endpoints to be /allocations rather than /pinlinst
It's more self-explanatory.
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>
The disk informer uses "ipfs repo stat" to fetch the RepoSize value and
uses it as a metric.
The numpinalloc allocator is now a generalized ascendalloc which
sorts metrics in ascending order and return the ones with lowest
values.
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>
This adds a replication_factor query argument to the API
endpoint which allows to set a replication factor per Pin.
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>
An initial, simple approach to this. The PeerMonitor will
check it's metrics, compare to the current set of peers and put
an alert in the alerts channel if the metrics for a peer have expired.
Cluster reads this channel looking for "ping" alerts. The leader
is in charge of triggering repins in all the Cids allocated to
a given peer.
Also, metrics are now broadcasted to the cluster instead of pushed only
to the leader. Since they happen every few seconds it should be okay
regarding how it scales. Main problem was that if the leader is the node
going down, the new leader will not now about it as it doesn't have any
metrics for it, so it won't trigger an alert. If it acted on that then
the component needs to know it is the leader, or cluster needs to
handle alerts in complicated ways when leadership changes. Detecting
leadership changes or letting a component know who is the leader is another
dependency from the consensus algorithm that should be avoided. Therefore
we broadcast, for the moment.
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>
New PeerManager, Allocator, Informer components have been added along
with a new "replication_factor" configuration option.
First, cluster peers collect and push metrics (Informer) to the Cluster
leader regularly. The Informer is an interface that can be implemented
in custom wayts to support custom metrics.
Second, on a pin operation, using the information from the collected metrics,
an Allocator can provide a list of preferences as to where the new pin
should be assigned. The Allocator is an interface allowing to provide
different allocation strategies.
Both Allocator and Informer are Cluster Componenets, and have access
to the RPC API.
The allocations are kept in the shared state. Cluster peer failure
detection is still missing and re-allocation is still missing, although
re-pinning something when a node is down/metrics missing does re-allocate
the pin somewhere else.
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>
At the beginning we opted for native types which were
serializable (PinInfo had a CidStr field instead of Cid).
Now we provide types in two versions: native and serializable.
Go methods use native. The rest of APIs (REST/RPC) use always
serializable versions. Methods are provided to convert between the
two.
The reason for moving these out of the way is to be able to re-use
type definitions when parsing API responses in `ipfs-cluster-ctl` or
any other clients that come up. API responses are just the serializable
version of types in JSON encoding. This also reduces having
duplicate types defs and parsing methods everywhere.
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>
This commit adds PeerAdd() and PeerRemove() endpoints, CLI support,
tests. Peer management is a delicate issue because of how the consensus
works underneath and the places that need to track such peers.
When adding a peer the procedure is as follows:
* Try to open a connection to the new peer and abort if not reachable
* Broadcast a PeerManagerAddPeer operation which tells all cluster members
to add the new Peer. The Raft leader will add it to Raft's peerset and
the multiaddress will be saved in the ClusterPeers configuration key.
* If the above fails because some cluster node is not responding,
broadcast a PeerRemove() and try to undo any damage.
* If the broadcast succeeds, send our ClusterPeers to the new Peer along with
the local multiaddress we are using in the connection opened in the
first step (that is the multiaddress through which the other peer can reach us)
* The new peer updates its configuration with the new list and joins
the consensus
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>
I have renamed "members" to "peers".
Added IPFS daemon ID and addresses to the ID object and
have Peers() return the collection of ID() objects from the cluster.
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>
This has implied changes to the PinTracker API, to the IPFSConnector API and
a few renames on some PinTracker related constants.
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>
The former RPC stuff had become a monster, really hard to have an overview
of the RPC api capabilities and with lots of magic.
go-libp2p-rpc allows to have a clearly defined RPC api which
shows which methods every component can use. A component to perform
remote requests, and the convoluted LeaderRPC, BroadcastRPC methods are
no longer necessary.
Things are much simpler now, less goroutines are needed, the central channel
handling bottleneck is gone, RPC requests are very streamlined in form.
In the future, it would be inmediate to have components living on different
libp2p hosts and it is way clearer how to plug into the advanced cluster rpc
api.
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>