Snapshot saving state commands (upgrade and import)
now save raft config peers as consensus peers in snapshot.
Snapshot index 1 -> 2 when saving from a fresh import to force
replication when bootstrapping.
License: MIT
Signed-off-by: Wyatt Daviau <wdaviau@cs.stanford.edu>
Raft will fail to take a snapshot when applied index is
different from the last index. Therefore, we wait for
all updates to be aplied before snapshotting.
If still it doesn't work, we retry a few times.
License: MIT
Signed-off-by: Hector Sanjuan <code@hector.link>
The --version flag is default from our cli library so I left that. The
version subcommand prints only the version number + the short commit
so it's a bit more easy to parse.
I have additionally reduced the amount of output on start up by converting
some messages to debug. I wish there was a level between INFO and DEBUG
though.
License: MIT
Signed-off-by: Hector Sanjuan <code@hector.link>
ipfs-cluster-service now has a migration subcommand that upgrades
persistant state snapshots with an out-of-date format version to the
newest version of raft state. If all cluster members shutdown with
consistent state, upgrade ipfs-cluster, and run the state upgrade command,
the new version of cluster will be compatible with persistent storage.
ipfs-cluster now validates its persistent state upon loading it and exits
with a clear error in the case the state format version is not up to date.
Raft snapshotting is enforced on all shutdowns and the json backup is no
longer run. This commit makes use of recent changes to libp2p-raft
allowing raft states to implement their own marshaling strategies. Now
mapstate handles the logic for its (de)serialization. In the interest of
supporting various potential upgrade formats the state serialization
begins with a varint (right now one byte) describing the version.
Some go tests are modified and a go test is added to cover new ipfs-cluster
raft snapshot reading functions. Sharness tests are added to cover the
state upgrade command.
This commit changes the way that consensus.Clean() works. Before
it deleted the whole data folder. Now it renames it as <name>.old.0
and leaves it. When Clean() is called again, it renames <name>.old.0
as <name>.old.1, and the actual data becomes <name>.old.0. Higher number
means older. The number of backups is fixed to 5. When 5 backups exists
and a new one comes up again, the last one is discarded.
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>
The main differences is that the new version of Raft is more strict
about starting raft peers which already contain configurations.
For a start, cluster will fail to start if the configured cluster
peers are different from the Raft peers. The user will have to
manually cleanup Raft (TODO: an ipfs-cluster-service command for it).
Additionally, this commit adds extra options to the consensus/raft
configuration section, adds tests and improves existing ones and
improves certain code sections.
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>
The following commit reimplements ipfs-cluster configuration under
the following premises:
* Each component is initialized with a configuration object
defined by its module
* Each component decides how the JSON representation of its
configuration looks like
* Each component parses and validates its own configuration
* Each component exposes its own defaults
* Component configurations are make the sections of a
central JSON configuration file (which replaces the current
JSON format)
* Component configurations implement a common interface
(config.ComponentConfig) with a set of common operations
* The central configuration file is managed by a
config.ConfigManager which:
* Registers ComponentConfigs
* Assigns the correspondent sections from the JSON file to each
component and delegates the parsing
* Delegates the JSON generation for each section
* Can be notified when the configuration is updated and must be
saved to disk
The new service.json would then look as follows:
```json
{
"cluster": {
"id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2",
"private_key": "<...>",
"secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786",
"peers": [],
"bootstrap": [],
"leave_on_shutdown": false,
"listen_multiaddress": "/ip4/0.0.0.0/tcp/9096",
"state_sync_interval": "1m0s",
"ipfs_sync_interval": "2m10s",
"replication_factor": -1,
"monitor_ping_interval": "15s"
},
"consensus": {
"raft": {
"heartbeat_timeout": "1s",
"election_timeout": "1s",
"commit_timeout": "50ms",
"max_append_entries": 64,
"trailing_logs": 10240,
"snapshot_interval": "2m0s",
"snapshot_threshold": 8192,
"leader_lease_timeout": "500ms"
}
},
"api": {
"restapi": {
"listen_multiaddress": "/ip4/127.0.0.1/tcp/9094",
"read_timeout": "30s",
"read_header_timeout": "5s",
"write_timeout": "1m0s",
"idle_timeout": "2m0s"
}
},
"ipfs_connector": {
"ipfshttp": {
"proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095",
"node_multiaddress": "/ip4/127.0.0.1/tcp/5001",
"connect_swarms_delay": "7s",
"proxy_read_timeout": "10m0s",
"proxy_read_header_timeout": "5s",
"proxy_write_timeout": "10m0s",
"proxy_idle_timeout": "1m0s"
}
},
"monitor": {
"monbasic": {
"check_interval": "15s"
}
},
"informer": {
"disk": {
"metric_ttl": "30s",
"metric_type": "freespace"
},
"numpin": {
"metric_ttl": "10s"
}
}
}
```
This new format aims to be easily extensible per component. As such,
it already surfaces quite a few new options which were hardcoded
before.
Additionally, since Go API have changed, some redundant methods have been
removed and small refactoring has happened to take advantage of the new
way.
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>
We no longer set ConsensusDataFolder. We leave it empty (and ommited from the
configuration). When not set, it will take the path from which the configuration
file was read and use an "ipfs-cluster-data" subfolder in that path.
When set, the behaviour is just as before (ensures backwards compatiblity).
This will facilitate re-use of configuration files, for example, when mounting
them inside docker.
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>