Issue #162: Rework configuration format
The following commit reimplements ipfs-cluster configuration under
the following premises:
* Each component is initialized with a configuration object
defined by its module
* Each component decides how the JSON representation of its
configuration looks like
* Each component parses and validates its own configuration
* Each component exposes its own defaults
* Component configurations are make the sections of a
central JSON configuration file (which replaces the current
JSON format)
* Component configurations implement a common interface
(config.ComponentConfig) with a set of common operations
* The central configuration file is managed by a
config.ConfigManager which:
* Registers ComponentConfigs
* Assigns the correspondent sections from the JSON file to each
component and delegates the parsing
* Delegates the JSON generation for each section
* Can be notified when the configuration is updated and must be
saved to disk
The new service.json would then look as follows:
```json
{
"cluster": {
"id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2",
"private_key": "<...>",
"secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786",
"peers": [],
"bootstrap": [],
"leave_on_shutdown": false,
"listen_multiaddress": "/ip4/0.0.0.0/tcp/9096",
"state_sync_interval": "1m0s",
"ipfs_sync_interval": "2m10s",
"replication_factor": -1,
"monitor_ping_interval": "15s"
},
"consensus": {
"raft": {
"heartbeat_timeout": "1s",
"election_timeout": "1s",
"commit_timeout": "50ms",
"max_append_entries": 64,
"trailing_logs": 10240,
"snapshot_interval": "2m0s",
"snapshot_threshold": 8192,
"leader_lease_timeout": "500ms"
}
},
"api": {
"restapi": {
"listen_multiaddress": "/ip4/127.0.0.1/tcp/9094",
"read_timeout": "30s",
"read_header_timeout": "5s",
"write_timeout": "1m0s",
"idle_timeout": "2m0s"
}
},
"ipfs_connector": {
"ipfshttp": {
"proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095",
"node_multiaddress": "/ip4/127.0.0.1/tcp/5001",
"connect_swarms_delay": "7s",
"proxy_read_timeout": "10m0s",
"proxy_read_header_timeout": "5s",
"proxy_write_timeout": "10m0s",
"proxy_idle_timeout": "1m0s"
}
},
"monitor": {
"monbasic": {
"check_interval": "15s"
}
},
"informer": {
"disk": {
"metric_ttl": "30s",
"metric_type": "freespace"
},
"numpin": {
"metric_ttl": "10s"
}
}
}
```
This new format aims to be easily extensible per component. As such,
it already surfaces quite a few new options which were hardcoded
before.
Additionally, since Go API have changed, some redundant methods have been
removed and small refactoring has happened to take advantage of the new
way.
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>
2017-10-11 18:23:03 +00:00
|
|
|
package ipfscluster
|
|
|
|
|
|
|
|
import (
|
|
|
|
"encoding/json"
|
2018-10-26 09:38:30 +00:00
|
|
|
"os"
|
Issue #162: Rework configuration format
The following commit reimplements ipfs-cluster configuration under
the following premises:
* Each component is initialized with a configuration object
defined by its module
* Each component decides how the JSON representation of its
configuration looks like
* Each component parses and validates its own configuration
* Each component exposes its own defaults
* Component configurations are make the sections of a
central JSON configuration file (which replaces the current
JSON format)
* Component configurations implement a common interface
(config.ComponentConfig) with a set of common operations
* The central configuration file is managed by a
config.ConfigManager which:
* Registers ComponentConfigs
* Assigns the correspondent sections from the JSON file to each
component and delegates the parsing
* Delegates the JSON generation for each section
* Can be notified when the configuration is updated and must be
saved to disk
The new service.json would then look as follows:
```json
{
"cluster": {
"id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2",
"private_key": "<...>",
"secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786",
"peers": [],
"bootstrap": [],
"leave_on_shutdown": false,
"listen_multiaddress": "/ip4/0.0.0.0/tcp/9096",
"state_sync_interval": "1m0s",
"ipfs_sync_interval": "2m10s",
"replication_factor": -1,
"monitor_ping_interval": "15s"
},
"consensus": {
"raft": {
"heartbeat_timeout": "1s",
"election_timeout": "1s",
"commit_timeout": "50ms",
"max_append_entries": 64,
"trailing_logs": 10240,
"snapshot_interval": "2m0s",
"snapshot_threshold": 8192,
"leader_lease_timeout": "500ms"
}
},
"api": {
"restapi": {
"listen_multiaddress": "/ip4/127.0.0.1/tcp/9094",
"read_timeout": "30s",
"read_header_timeout": "5s",
"write_timeout": "1m0s",
"idle_timeout": "2m0s"
}
},
"ipfs_connector": {
"ipfshttp": {
"proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095",
"node_multiaddress": "/ip4/127.0.0.1/tcp/5001",
"connect_swarms_delay": "7s",
"proxy_read_timeout": "10m0s",
"proxy_read_header_timeout": "5s",
"proxy_write_timeout": "10m0s",
"proxy_idle_timeout": "1m0s"
}
},
"monitor": {
"monbasic": {
"check_interval": "15s"
}
},
"informer": {
"disk": {
"metric_ttl": "30s",
"metric_type": "freespace"
},
"numpin": {
"metric_ttl": "10s"
}
}
}
```
This new format aims to be easily extensible per component. As such,
it already surfaces quite a few new options which were hardcoded
before.
Additionally, since Go API have changed, some redundant methods have been
removed and small refactoring has happened to take advantage of the new
way.
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>
2017-10-11 18:23:03 +00:00
|
|
|
"testing"
|
|
|
|
)
|
|
|
|
|
|
|
|
var ccfgTestJSON = []byte(`
|
|
|
|
{
|
|
|
|
"id": "QmUfSFm12eYCaRdypg48m8RqkXfLW7A2ZeGZb2skeHHDGA",
|
2017-12-01 18:50:13 +00:00
|
|
|
"peername": "testpeer",
|
Issue #162: Rework configuration format
The following commit reimplements ipfs-cluster configuration under
the following premises:
* Each component is initialized with a configuration object
defined by its module
* Each component decides how the JSON representation of its
configuration looks like
* Each component parses and validates its own configuration
* Each component exposes its own defaults
* Component configurations are make the sections of a
central JSON configuration file (which replaces the current
JSON format)
* Component configurations implement a common interface
(config.ComponentConfig) with a set of common operations
* The central configuration file is managed by a
config.ConfigManager which:
* Registers ComponentConfigs
* Assigns the correspondent sections from the JSON file to each
component and delegates the parsing
* Delegates the JSON generation for each section
* Can be notified when the configuration is updated and must be
saved to disk
The new service.json would then look as follows:
```json
{
"cluster": {
"id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2",
"private_key": "<...>",
"secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786",
"peers": [],
"bootstrap": [],
"leave_on_shutdown": false,
"listen_multiaddress": "/ip4/0.0.0.0/tcp/9096",
"state_sync_interval": "1m0s",
"ipfs_sync_interval": "2m10s",
"replication_factor": -1,
"monitor_ping_interval": "15s"
},
"consensus": {
"raft": {
"heartbeat_timeout": "1s",
"election_timeout": "1s",
"commit_timeout": "50ms",
"max_append_entries": 64,
"trailing_logs": 10240,
"snapshot_interval": "2m0s",
"snapshot_threshold": 8192,
"leader_lease_timeout": "500ms"
}
},
"api": {
"restapi": {
"listen_multiaddress": "/ip4/127.0.0.1/tcp/9094",
"read_timeout": "30s",
"read_header_timeout": "5s",
"write_timeout": "1m0s",
"idle_timeout": "2m0s"
}
},
"ipfs_connector": {
"ipfshttp": {
"proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095",
"node_multiaddress": "/ip4/127.0.0.1/tcp/5001",
"connect_swarms_delay": "7s",
"proxy_read_timeout": "10m0s",
"proxy_read_header_timeout": "5s",
"proxy_write_timeout": "10m0s",
"proxy_idle_timeout": "1m0s"
}
},
"monitor": {
"monbasic": {
"check_interval": "15s"
}
},
"informer": {
"disk": {
"metric_ttl": "30s",
"metric_type": "freespace"
},
"numpin": {
"metric_ttl": "10s"
}
}
}
```
This new format aims to be easily extensible per component. As such,
it already surfaces quite a few new options which were hardcoded
before.
Additionally, since Go API have changed, some redundant methods have been
removed and small refactoring has happened to take advantage of the new
way.
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>
2017-10-11 18:23:03 +00:00
|
|
|
"private_key": "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",
|
|
|
|
"secret": "2588b80d5cb05374fa142aed6cbb047d1f4ef8ef15e37eba68c65b9d30df67ed",
|
|
|
|
"leave_on_shutdown": true,
|
|
|
|
"listen_multiaddress": "/ip4/127.0.0.1/tcp/10000",
|
|
|
|
"state_sync_interval": "1m0s",
|
|
|
|
"ipfs_sync_interval": "2m10s",
|
2018-01-12 17:04:46 +00:00
|
|
|
"replication_factor_min": 5,
|
|
|
|
"replication_factor_max": 5,
|
2018-04-22 16:25:18 +00:00
|
|
|
"monitor_ping_interval": "2s",
|
|
|
|
"disable_repinning": true
|
Issue #162: Rework configuration format
The following commit reimplements ipfs-cluster configuration under
the following premises:
* Each component is initialized with a configuration object
defined by its module
* Each component decides how the JSON representation of its
configuration looks like
* Each component parses and validates its own configuration
* Each component exposes its own defaults
* Component configurations are make the sections of a
central JSON configuration file (which replaces the current
JSON format)
* Component configurations implement a common interface
(config.ComponentConfig) with a set of common operations
* The central configuration file is managed by a
config.ConfigManager which:
* Registers ComponentConfigs
* Assigns the correspondent sections from the JSON file to each
component and delegates the parsing
* Delegates the JSON generation for each section
* Can be notified when the configuration is updated and must be
saved to disk
The new service.json would then look as follows:
```json
{
"cluster": {
"id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2",
"private_key": "<...>",
"secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786",
"peers": [],
"bootstrap": [],
"leave_on_shutdown": false,
"listen_multiaddress": "/ip4/0.0.0.0/tcp/9096",
"state_sync_interval": "1m0s",
"ipfs_sync_interval": "2m10s",
"replication_factor": -1,
"monitor_ping_interval": "15s"
},
"consensus": {
"raft": {
"heartbeat_timeout": "1s",
"election_timeout": "1s",
"commit_timeout": "50ms",
"max_append_entries": 64,
"trailing_logs": 10240,
"snapshot_interval": "2m0s",
"snapshot_threshold": 8192,
"leader_lease_timeout": "500ms"
}
},
"api": {
"restapi": {
"listen_multiaddress": "/ip4/127.0.0.1/tcp/9094",
"read_timeout": "30s",
"read_header_timeout": "5s",
"write_timeout": "1m0s",
"idle_timeout": "2m0s"
}
},
"ipfs_connector": {
"ipfshttp": {
"proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095",
"node_multiaddress": "/ip4/127.0.0.1/tcp/5001",
"connect_swarms_delay": "7s",
"proxy_read_timeout": "10m0s",
"proxy_read_header_timeout": "5s",
"proxy_write_timeout": "10m0s",
"proxy_idle_timeout": "1m0s"
}
},
"monitor": {
"monbasic": {
"check_interval": "15s"
}
},
"informer": {
"disk": {
"metric_ttl": "30s",
"metric_type": "freespace"
},
"numpin": {
"metric_ttl": "10s"
}
}
}
```
This new format aims to be easily extensible per component. As such,
it already surfaces quite a few new options which were hardcoded
before.
Additionally, since Go API have changed, some redundant methods have been
removed and small refactoring has happened to take advantage of the new
way.
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>
2017-10-11 18:23:03 +00:00
|
|
|
}
|
|
|
|
`)
|
|
|
|
|
|
|
|
func TestLoadJSON(t *testing.T) {
|
2018-10-26 09:38:30 +00:00
|
|
|
loadJSON := func(t *testing.T) (*Config, error) {
|
|
|
|
cfg := &Config{}
|
|
|
|
err := cfg.LoadJSON(ccfgTestJSON)
|
|
|
|
if err != nil {
|
|
|
|
return cfg, err
|
|
|
|
}
|
|
|
|
return cfg, nil
|
|
|
|
}
|
|
|
|
|
|
|
|
t.Run("basic", func(t *testing.T) {
|
|
|
|
cfg := &Config{}
|
|
|
|
err := cfg.LoadJSON(ccfgTestJSON)
|
|
|
|
if err != nil {
|
|
|
|
t.Fatal(err)
|
|
|
|
}
|
|
|
|
})
|
|
|
|
|
|
|
|
t.Run("peername", func(t *testing.T) {
|
|
|
|
cfg, err := loadJSON(t)
|
|
|
|
if err != nil {
|
|
|
|
t.Error(err)
|
|
|
|
}
|
|
|
|
if cfg.Peername != "testpeer" {
|
|
|
|
t.Error("expected peername 'testpeer'")
|
|
|
|
}
|
|
|
|
})
|
|
|
|
|
|
|
|
t.Run("expected replication factor", func(t *testing.T) {
|
|
|
|
cfg, err := loadJSON(t)
|
|
|
|
if err != nil {
|
|
|
|
t.Error(err)
|
|
|
|
}
|
|
|
|
if cfg.ReplicationFactorMin != 5 {
|
|
|
|
t.Error("expected replication factor min == 5")
|
|
|
|
}
|
|
|
|
})
|
|
|
|
|
|
|
|
t.Run("expected disable_repinning", func(t *testing.T) {
|
|
|
|
cfg, err := loadJSON(t)
|
|
|
|
if err != nil {
|
|
|
|
t.Error(err)
|
|
|
|
}
|
|
|
|
if !cfg.DisableRepinning {
|
|
|
|
t.Error("expected disable_repinning to be true")
|
|
|
|
}
|
|
|
|
})
|
|
|
|
|
|
|
|
loadJSON2 := func(t *testing.T, f func(j *configJSON)) (*Config, error) {
|
|
|
|
cfg := &Config{}
|
|
|
|
j := &configJSON{}
|
|
|
|
json.Unmarshal(ccfgTestJSON, j)
|
|
|
|
f(j)
|
|
|
|
tst, err := json.Marshal(j)
|
|
|
|
if err != nil {
|
|
|
|
return cfg, err
|
|
|
|
}
|
|
|
|
err = cfg.LoadJSON(tst)
|
|
|
|
if err != nil {
|
|
|
|
return cfg, err
|
|
|
|
}
|
|
|
|
return cfg, nil
|
|
|
|
}
|
|
|
|
|
|
|
|
t.Run("bad id", func(t *testing.T) {
|
|
|
|
_, err := loadJSON2(t, func(j *configJSON) { j.ID = "abc" })
|
|
|
|
if err == nil {
|
|
|
|
t.Error("expected error decoding ID")
|
|
|
|
}
|
|
|
|
})
|
|
|
|
|
|
|
|
t.Run("empty default peername", func(t *testing.T) {
|
|
|
|
cfg, err := loadJSON2(t, func(j *configJSON) { j.Peername = "" })
|
|
|
|
if err != nil {
|
|
|
|
t.Error(err)
|
|
|
|
}
|
|
|
|
if cfg.Peername == "" {
|
|
|
|
t.Error("expected default peername")
|
|
|
|
}
|
|
|
|
})
|
|
|
|
|
|
|
|
t.Run("bad private key", func(t *testing.T) {
|
|
|
|
_, err := loadJSON2(t, func(j *configJSON) { j.PrivateKey = "abc" })
|
|
|
|
if err == nil {
|
|
|
|
t.Error("expected error parsing private key")
|
|
|
|
}
|
|
|
|
})
|
|
|
|
|
|
|
|
t.Run("bad listen multiaddress", func(t *testing.T) {
|
|
|
|
_, err := loadJSON2(t, func(j *configJSON) { j.ListenMultiaddress = "abc" })
|
|
|
|
if err == nil {
|
|
|
|
t.Error("expected error parsing listen_multiaddress")
|
|
|
|
}
|
|
|
|
})
|
|
|
|
|
|
|
|
t.Run("bad secret", func(t *testing.T) {
|
|
|
|
_, err := loadJSON2(t, func(j *configJSON) { j.Secret = "abc" })
|
|
|
|
if err == nil {
|
|
|
|
t.Error("expected error decoding secret")
|
|
|
|
}
|
|
|
|
})
|
|
|
|
|
|
|
|
t.Run("default replication factors", func(t *testing.T) {
|
|
|
|
cfg, err := loadJSON2(
|
|
|
|
t,
|
|
|
|
func(j *configJSON) {
|
|
|
|
j.ReplicationFactorMin = 0
|
|
|
|
j.ReplicationFactorMax = 0
|
|
|
|
},
|
|
|
|
)
|
|
|
|
if err != nil {
|
|
|
|
t.Error(err)
|
|
|
|
}
|
|
|
|
if cfg.ReplicationFactorMin != -1 || cfg.ReplicationFactorMax != -1 {
|
|
|
|
t.Error("expected default replication factor")
|
|
|
|
}
|
|
|
|
})
|
|
|
|
|
|
|
|
t.Run("only replication factor min set to -1", func(t *testing.T) {
|
|
|
|
_, err := loadJSON2(t, func(j *configJSON) { j.ReplicationFactorMin = -1 })
|
|
|
|
if err == nil {
|
|
|
|
t.Error("expected error when only one replication factor is -1")
|
|
|
|
}
|
|
|
|
})
|
|
|
|
|
|
|
|
t.Run("replication factor min > max", func(t *testing.T) {
|
|
|
|
_, err := loadJSON2(
|
|
|
|
t,
|
|
|
|
func(j *configJSON) {
|
|
|
|
j.ReplicationFactorMin = 5
|
|
|
|
j.ReplicationFactorMax = 4
|
|
|
|
},
|
|
|
|
)
|
|
|
|
if err == nil {
|
|
|
|
t.Error("expected error when only rplMin > rplMax")
|
|
|
|
}
|
|
|
|
})
|
|
|
|
|
|
|
|
t.Run("default replication factor", func(t *testing.T) {
|
|
|
|
cfg, err := loadJSON2(
|
|
|
|
t,
|
|
|
|
func(j *configJSON) {
|
|
|
|
j.ReplicationFactorMin = 0
|
|
|
|
j.ReplicationFactorMax = 0
|
|
|
|
},
|
|
|
|
)
|
|
|
|
if err != nil {
|
|
|
|
t.Error(err)
|
|
|
|
}
|
|
|
|
if cfg.ReplicationFactorMin != -1 || cfg.ReplicationFactorMax != -1 {
|
|
|
|
t.Error("expected default replication factors")
|
|
|
|
}
|
|
|
|
})
|
Issue #162: Rework configuration format
The following commit reimplements ipfs-cluster configuration under
the following premises:
* Each component is initialized with a configuration object
defined by its module
* Each component decides how the JSON representation of its
configuration looks like
* Each component parses and validates its own configuration
* Each component exposes its own defaults
* Component configurations are make the sections of a
central JSON configuration file (which replaces the current
JSON format)
* Component configurations implement a common interface
(config.ComponentConfig) with a set of common operations
* The central configuration file is managed by a
config.ConfigManager which:
* Registers ComponentConfigs
* Assigns the correspondent sections from the JSON file to each
component and delegates the parsing
* Delegates the JSON generation for each section
* Can be notified when the configuration is updated and must be
saved to disk
The new service.json would then look as follows:
```json
{
"cluster": {
"id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2",
"private_key": "<...>",
"secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786",
"peers": [],
"bootstrap": [],
"leave_on_shutdown": false,
"listen_multiaddress": "/ip4/0.0.0.0/tcp/9096",
"state_sync_interval": "1m0s",
"ipfs_sync_interval": "2m10s",
"replication_factor": -1,
"monitor_ping_interval": "15s"
},
"consensus": {
"raft": {
"heartbeat_timeout": "1s",
"election_timeout": "1s",
"commit_timeout": "50ms",
"max_append_entries": 64,
"trailing_logs": 10240,
"snapshot_interval": "2m0s",
"snapshot_threshold": 8192,
"leader_lease_timeout": "500ms"
}
},
"api": {
"restapi": {
"listen_multiaddress": "/ip4/127.0.0.1/tcp/9094",
"read_timeout": "30s",
"read_header_timeout": "5s",
"write_timeout": "1m0s",
"idle_timeout": "2m0s"
}
},
"ipfs_connector": {
"ipfshttp": {
"proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095",
"node_multiaddress": "/ip4/127.0.0.1/tcp/5001",
"connect_swarms_delay": "7s",
"proxy_read_timeout": "10m0s",
"proxy_read_header_timeout": "5s",
"proxy_write_timeout": "10m0s",
"proxy_idle_timeout": "1m0s"
}
},
"monitor": {
"monbasic": {
"check_interval": "15s"
}
},
"informer": {
"disk": {
"metric_ttl": "30s",
"metric_type": "freespace"
},
"numpin": {
"metric_ttl": "10s"
}
}
}
```
This new format aims to be easily extensible per component. As such,
it already surfaces quite a few new options which were hardcoded
before.
Additionally, since Go API have changed, some redundant methods have been
removed and small refactoring has happened to take advantage of the new
way.
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>
2017-10-11 18:23:03 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
func TestToJSON(t *testing.T) {
|
|
|
|
cfg := &Config{}
|
|
|
|
cfg.LoadJSON(ccfgTestJSON)
|
2017-10-20 08:42:41 +00:00
|
|
|
newjson, err := cfg.ToJSON()
|
|
|
|
if err != nil {
|
|
|
|
t.Fatal(err)
|
|
|
|
}
|
|
|
|
cfg = &Config{}
|
|
|
|
err = cfg.LoadJSON(newjson)
|
Issue #162: Rework configuration format
The following commit reimplements ipfs-cluster configuration under
the following premises:
* Each component is initialized with a configuration object
defined by its module
* Each component decides how the JSON representation of its
configuration looks like
* Each component parses and validates its own configuration
* Each component exposes its own defaults
* Component configurations are make the sections of a
central JSON configuration file (which replaces the current
JSON format)
* Component configurations implement a common interface
(config.ComponentConfig) with a set of common operations
* The central configuration file is managed by a
config.ConfigManager which:
* Registers ComponentConfigs
* Assigns the correspondent sections from the JSON file to each
component and delegates the parsing
* Delegates the JSON generation for each section
* Can be notified when the configuration is updated and must be
saved to disk
The new service.json would then look as follows:
```json
{
"cluster": {
"id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2",
"private_key": "<...>",
"secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786",
"peers": [],
"bootstrap": [],
"leave_on_shutdown": false,
"listen_multiaddress": "/ip4/0.0.0.0/tcp/9096",
"state_sync_interval": "1m0s",
"ipfs_sync_interval": "2m10s",
"replication_factor": -1,
"monitor_ping_interval": "15s"
},
"consensus": {
"raft": {
"heartbeat_timeout": "1s",
"election_timeout": "1s",
"commit_timeout": "50ms",
"max_append_entries": 64,
"trailing_logs": 10240,
"snapshot_interval": "2m0s",
"snapshot_threshold": 8192,
"leader_lease_timeout": "500ms"
}
},
"api": {
"restapi": {
"listen_multiaddress": "/ip4/127.0.0.1/tcp/9094",
"read_timeout": "30s",
"read_header_timeout": "5s",
"write_timeout": "1m0s",
"idle_timeout": "2m0s"
}
},
"ipfs_connector": {
"ipfshttp": {
"proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095",
"node_multiaddress": "/ip4/127.0.0.1/tcp/5001",
"connect_swarms_delay": "7s",
"proxy_read_timeout": "10m0s",
"proxy_read_header_timeout": "5s",
"proxy_write_timeout": "10m0s",
"proxy_idle_timeout": "1m0s"
}
},
"monitor": {
"monbasic": {
"check_interval": "15s"
}
},
"informer": {
"disk": {
"metric_ttl": "30s",
"metric_type": "freespace"
},
"numpin": {
"metric_ttl": "10s"
}
}
}
```
This new format aims to be easily extensible per component. As such,
it already surfaces quite a few new options which were hardcoded
before.
Additionally, since Go API have changed, some redundant methods have been
removed and small refactoring has happened to take advantage of the new
way.
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>
2017-10-11 18:23:03 +00:00
|
|
|
if err != nil {
|
|
|
|
t.Fatal(err)
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
func TestDefault(t *testing.T) {
|
|
|
|
cfg := &Config{}
|
|
|
|
cfg.Default()
|
|
|
|
if err := cfg.Validate(); err != nil {
|
|
|
|
t.Fatal(err)
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2019-02-18 11:36:51 +00:00
|
|
|
func TestApplyEnvVars(t *testing.T) {
|
|
|
|
os.Setenv("CLUSTER_PEERNAME", "envsetpeername")
|
|
|
|
cfg := &Config{}
|
|
|
|
cfg.Default()
|
|
|
|
cfg.ApplyEnvVars()
|
|
|
|
if cfg.Peername != "envsetpeername" {
|
|
|
|
t.Fatal("failed to override peername with env var")
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
Issue #162: Rework configuration format
The following commit reimplements ipfs-cluster configuration under
the following premises:
* Each component is initialized with a configuration object
defined by its module
* Each component decides how the JSON representation of its
configuration looks like
* Each component parses and validates its own configuration
* Each component exposes its own defaults
* Component configurations are make the sections of a
central JSON configuration file (which replaces the current
JSON format)
* Component configurations implement a common interface
(config.ComponentConfig) with a set of common operations
* The central configuration file is managed by a
config.ConfigManager which:
* Registers ComponentConfigs
* Assigns the correspondent sections from the JSON file to each
component and delegates the parsing
* Delegates the JSON generation for each section
* Can be notified when the configuration is updated and must be
saved to disk
The new service.json would then look as follows:
```json
{
"cluster": {
"id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2",
"private_key": "<...>",
"secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786",
"peers": [],
"bootstrap": [],
"leave_on_shutdown": false,
"listen_multiaddress": "/ip4/0.0.0.0/tcp/9096",
"state_sync_interval": "1m0s",
"ipfs_sync_interval": "2m10s",
"replication_factor": -1,
"monitor_ping_interval": "15s"
},
"consensus": {
"raft": {
"heartbeat_timeout": "1s",
"election_timeout": "1s",
"commit_timeout": "50ms",
"max_append_entries": 64,
"trailing_logs": 10240,
"snapshot_interval": "2m0s",
"snapshot_threshold": 8192,
"leader_lease_timeout": "500ms"
}
},
"api": {
"restapi": {
"listen_multiaddress": "/ip4/127.0.0.1/tcp/9094",
"read_timeout": "30s",
"read_header_timeout": "5s",
"write_timeout": "1m0s",
"idle_timeout": "2m0s"
}
},
"ipfs_connector": {
"ipfshttp": {
"proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095",
"node_multiaddress": "/ip4/127.0.0.1/tcp/5001",
"connect_swarms_delay": "7s",
"proxy_read_timeout": "10m0s",
"proxy_read_header_timeout": "5s",
"proxy_write_timeout": "10m0s",
"proxy_idle_timeout": "1m0s"
}
},
"monitor": {
"monbasic": {
"check_interval": "15s"
}
},
"informer": {
"disk": {
"metric_ttl": "30s",
"metric_type": "freespace"
},
"numpin": {
"metric_ttl": "10s"
}
}
}
```
This new format aims to be easily extensible per component. As such,
it already surfaces quite a few new options which were hardcoded
before.
Additionally, since Go API have changed, some redundant methods have been
removed and small refactoring has happened to take advantage of the new
way.
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>
2017-10-11 18:23:03 +00:00
|
|
|
func TestValidate(t *testing.T) {
|
|
|
|
cfg := &Config{}
|
|
|
|
cfg.Default()
|
|
|
|
cfg.ID = ""
|
2017-10-19 18:49:18 +00:00
|
|
|
if cfg.Validate() == nil {
|
Issue #162: Rework configuration format
The following commit reimplements ipfs-cluster configuration under
the following premises:
* Each component is initialized with a configuration object
defined by its module
* Each component decides how the JSON representation of its
configuration looks like
* Each component parses and validates its own configuration
* Each component exposes its own defaults
* Component configurations are make the sections of a
central JSON configuration file (which replaces the current
JSON format)
* Component configurations implement a common interface
(config.ComponentConfig) with a set of common operations
* The central configuration file is managed by a
config.ConfigManager which:
* Registers ComponentConfigs
* Assigns the correspondent sections from the JSON file to each
component and delegates the parsing
* Delegates the JSON generation for each section
* Can be notified when the configuration is updated and must be
saved to disk
The new service.json would then look as follows:
```json
{
"cluster": {
"id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2",
"private_key": "<...>",
"secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786",
"peers": [],
"bootstrap": [],
"leave_on_shutdown": false,
"listen_multiaddress": "/ip4/0.0.0.0/tcp/9096",
"state_sync_interval": "1m0s",
"ipfs_sync_interval": "2m10s",
"replication_factor": -1,
"monitor_ping_interval": "15s"
},
"consensus": {
"raft": {
"heartbeat_timeout": "1s",
"election_timeout": "1s",
"commit_timeout": "50ms",
"max_append_entries": 64,
"trailing_logs": 10240,
"snapshot_interval": "2m0s",
"snapshot_threshold": 8192,
"leader_lease_timeout": "500ms"
}
},
"api": {
"restapi": {
"listen_multiaddress": "/ip4/127.0.0.1/tcp/9094",
"read_timeout": "30s",
"read_header_timeout": "5s",
"write_timeout": "1m0s",
"idle_timeout": "2m0s"
}
},
"ipfs_connector": {
"ipfshttp": {
"proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095",
"node_multiaddress": "/ip4/127.0.0.1/tcp/5001",
"connect_swarms_delay": "7s",
"proxy_read_timeout": "10m0s",
"proxy_read_header_timeout": "5s",
"proxy_write_timeout": "10m0s",
"proxy_idle_timeout": "1m0s"
}
},
"monitor": {
"monbasic": {
"check_interval": "15s"
}
},
"informer": {
"disk": {
"metric_ttl": "30s",
"metric_type": "freespace"
},
"numpin": {
"metric_ttl": "10s"
}
}
}
```
This new format aims to be easily extensible per component. As such,
it already surfaces quite a few new options which were hardcoded
before.
Additionally, since Go API have changed, some redundant methods have been
removed and small refactoring has happened to take advantage of the new
way.
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>
2017-10-11 18:23:03 +00:00
|
|
|
t.Fatal("expected error validating")
|
|
|
|
}
|
|
|
|
|
|
|
|
cfg.Default()
|
|
|
|
cfg.MonitorPingInterval = 0
|
2017-10-19 18:49:18 +00:00
|
|
|
if cfg.Validate() == nil {
|
Issue #162: Rework configuration format
The following commit reimplements ipfs-cluster configuration under
the following premises:
* Each component is initialized with a configuration object
defined by its module
* Each component decides how the JSON representation of its
configuration looks like
* Each component parses and validates its own configuration
* Each component exposes its own defaults
* Component configurations are make the sections of a
central JSON configuration file (which replaces the current
JSON format)
* Component configurations implement a common interface
(config.ComponentConfig) with a set of common operations
* The central configuration file is managed by a
config.ConfigManager which:
* Registers ComponentConfigs
* Assigns the correspondent sections from the JSON file to each
component and delegates the parsing
* Delegates the JSON generation for each section
* Can be notified when the configuration is updated and must be
saved to disk
The new service.json would then look as follows:
```json
{
"cluster": {
"id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2",
"private_key": "<...>",
"secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786",
"peers": [],
"bootstrap": [],
"leave_on_shutdown": false,
"listen_multiaddress": "/ip4/0.0.0.0/tcp/9096",
"state_sync_interval": "1m0s",
"ipfs_sync_interval": "2m10s",
"replication_factor": -1,
"monitor_ping_interval": "15s"
},
"consensus": {
"raft": {
"heartbeat_timeout": "1s",
"election_timeout": "1s",
"commit_timeout": "50ms",
"max_append_entries": 64,
"trailing_logs": 10240,
"snapshot_interval": "2m0s",
"snapshot_threshold": 8192,
"leader_lease_timeout": "500ms"
}
},
"api": {
"restapi": {
"listen_multiaddress": "/ip4/127.0.0.1/tcp/9094",
"read_timeout": "30s",
"read_header_timeout": "5s",
"write_timeout": "1m0s",
"idle_timeout": "2m0s"
}
},
"ipfs_connector": {
"ipfshttp": {
"proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095",
"node_multiaddress": "/ip4/127.0.0.1/tcp/5001",
"connect_swarms_delay": "7s",
"proxy_read_timeout": "10m0s",
"proxy_read_header_timeout": "5s",
"proxy_write_timeout": "10m0s",
"proxy_idle_timeout": "1m0s"
}
},
"monitor": {
"monbasic": {
"check_interval": "15s"
}
},
"informer": {
"disk": {
"metric_ttl": "30s",
"metric_type": "freespace"
},
"numpin": {
"metric_ttl": "10s"
}
}
}
```
This new format aims to be easily extensible per component. As such,
it already surfaces quite a few new options which were hardcoded
before.
Additionally, since Go API have changed, some redundant methods have been
removed and small refactoring has happened to take advantage of the new
way.
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>
2017-10-11 18:23:03 +00:00
|
|
|
t.Fatal("expected error validating")
|
|
|
|
}
|
2018-01-12 17:04:46 +00:00
|
|
|
|
|
|
|
cfg.Default()
|
|
|
|
cfg.ReplicationFactorMin = 10
|
|
|
|
cfg.ReplicationFactorMax = 5
|
|
|
|
if cfg.Validate() == nil {
|
|
|
|
t.Fatal("expected error validating")
|
|
|
|
}
|
|
|
|
|
|
|
|
cfg.Default()
|
|
|
|
cfg.ReplicationFactorMin = 0
|
|
|
|
if cfg.Validate() == nil {
|
|
|
|
t.Fatal("expected error validating")
|
|
|
|
}
|
Issue #162: Rework configuration format
The following commit reimplements ipfs-cluster configuration under
the following premises:
* Each component is initialized with a configuration object
defined by its module
* Each component decides how the JSON representation of its
configuration looks like
* Each component parses and validates its own configuration
* Each component exposes its own defaults
* Component configurations are make the sections of a
central JSON configuration file (which replaces the current
JSON format)
* Component configurations implement a common interface
(config.ComponentConfig) with a set of common operations
* The central configuration file is managed by a
config.ConfigManager which:
* Registers ComponentConfigs
* Assigns the correspondent sections from the JSON file to each
component and delegates the parsing
* Delegates the JSON generation for each section
* Can be notified when the configuration is updated and must be
saved to disk
The new service.json would then look as follows:
```json
{
"cluster": {
"id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2",
"private_key": "<...>",
"secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786",
"peers": [],
"bootstrap": [],
"leave_on_shutdown": false,
"listen_multiaddress": "/ip4/0.0.0.0/tcp/9096",
"state_sync_interval": "1m0s",
"ipfs_sync_interval": "2m10s",
"replication_factor": -1,
"monitor_ping_interval": "15s"
},
"consensus": {
"raft": {
"heartbeat_timeout": "1s",
"election_timeout": "1s",
"commit_timeout": "50ms",
"max_append_entries": 64,
"trailing_logs": 10240,
"snapshot_interval": "2m0s",
"snapshot_threshold": 8192,
"leader_lease_timeout": "500ms"
}
},
"api": {
"restapi": {
"listen_multiaddress": "/ip4/127.0.0.1/tcp/9094",
"read_timeout": "30s",
"read_header_timeout": "5s",
"write_timeout": "1m0s",
"idle_timeout": "2m0s"
}
},
"ipfs_connector": {
"ipfshttp": {
"proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095",
"node_multiaddress": "/ip4/127.0.0.1/tcp/5001",
"connect_swarms_delay": "7s",
"proxy_read_timeout": "10m0s",
"proxy_read_header_timeout": "5s",
"proxy_write_timeout": "10m0s",
"proxy_idle_timeout": "1m0s"
}
},
"monitor": {
"monbasic": {
"check_interval": "15s"
}
},
"informer": {
"disk": {
"metric_ttl": "30s",
"metric_type": "freespace"
},
"numpin": {
"metric_ttl": "10s"
}
}
}
```
This new format aims to be easily extensible per component. As such,
it already surfaces quite a few new options which were hardcoded
before.
Additionally, since Go API have changed, some redundant methods have been
removed and small refactoring has happened to take advantage of the new
way.
License: MIT
Signed-off-by: Hector Sanjuan <hector@protocol.ai>
2017-10-11 18:23:03 +00:00
|
|
|
}
|