ipfs-cluster/cluster_config_test.go

287 lines
6.3 KiB
Go
Raw Normal View History

Issue #162: Rework configuration format The following commit reimplements ipfs-cluster configuration under the following premises: * Each component is initialized with a configuration object defined by its module * Each component decides how the JSON representation of its configuration looks like * Each component parses and validates its own configuration * Each component exposes its own defaults * Component configurations are make the sections of a central JSON configuration file (which replaces the current JSON format) * Component configurations implement a common interface (config.ComponentConfig) with a set of common operations * The central configuration file is managed by a config.ConfigManager which: * Registers ComponentConfigs * Assigns the correspondent sections from the JSON file to each component and delegates the parsing * Delegates the JSON generation for each section * Can be notified when the configuration is updated and must be saved to disk The new service.json would then look as follows: ```json { "cluster": { "id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2", "private_key": "<...>", "secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786", "peers": [], "bootstrap": [], "leave_on_shutdown": false, "listen_multiaddress": "/ip4/0.0.0.0/tcp/9096", "state_sync_interval": "1m0s", "ipfs_sync_interval": "2m10s", "replication_factor": -1, "monitor_ping_interval": "15s" }, "consensus": { "raft": { "heartbeat_timeout": "1s", "election_timeout": "1s", "commit_timeout": "50ms", "max_append_entries": 64, "trailing_logs": 10240, "snapshot_interval": "2m0s", "snapshot_threshold": 8192, "leader_lease_timeout": "500ms" } }, "api": { "restapi": { "listen_multiaddress": "/ip4/127.0.0.1/tcp/9094", "read_timeout": "30s", "read_header_timeout": "5s", "write_timeout": "1m0s", "idle_timeout": "2m0s" } }, "ipfs_connector": { "ipfshttp": { "proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095", "node_multiaddress": "/ip4/127.0.0.1/tcp/5001", "connect_swarms_delay": "7s", "proxy_read_timeout": "10m0s", "proxy_read_header_timeout": "5s", "proxy_write_timeout": "10m0s", "proxy_idle_timeout": "1m0s" } }, "monitor": { "monbasic": { "check_interval": "15s" } }, "informer": { "disk": { "metric_ttl": "30s", "metric_type": "freespace" }, "numpin": { "metric_ttl": "10s" } } } ``` This new format aims to be easily extensible per component. As such, it already surfaces quite a few new options which were hardcoded before. Additionally, since Go API have changed, some redundant methods have been removed and small refactoring has happened to take advantage of the new way. License: MIT Signed-off-by: Hector Sanjuan <hector@protocol.ai>
2017-10-11 18:23:03 +00:00
package ipfscluster
import (
"encoding/json"
"os"
Issue #162: Rework configuration format The following commit reimplements ipfs-cluster configuration under the following premises: * Each component is initialized with a configuration object defined by its module * Each component decides how the JSON representation of its configuration looks like * Each component parses and validates its own configuration * Each component exposes its own defaults * Component configurations are make the sections of a central JSON configuration file (which replaces the current JSON format) * Component configurations implement a common interface (config.ComponentConfig) with a set of common operations * The central configuration file is managed by a config.ConfigManager which: * Registers ComponentConfigs * Assigns the correspondent sections from the JSON file to each component and delegates the parsing * Delegates the JSON generation for each section * Can be notified when the configuration is updated and must be saved to disk The new service.json would then look as follows: ```json { "cluster": { "id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2", "private_key": "<...>", "secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786", "peers": [], "bootstrap": [], "leave_on_shutdown": false, "listen_multiaddress": "/ip4/0.0.0.0/tcp/9096", "state_sync_interval": "1m0s", "ipfs_sync_interval": "2m10s", "replication_factor": -1, "monitor_ping_interval": "15s" }, "consensus": { "raft": { "heartbeat_timeout": "1s", "election_timeout": "1s", "commit_timeout": "50ms", "max_append_entries": 64, "trailing_logs": 10240, "snapshot_interval": "2m0s", "snapshot_threshold": 8192, "leader_lease_timeout": "500ms" } }, "api": { "restapi": { "listen_multiaddress": "/ip4/127.0.0.1/tcp/9094", "read_timeout": "30s", "read_header_timeout": "5s", "write_timeout": "1m0s", "idle_timeout": "2m0s" } }, "ipfs_connector": { "ipfshttp": { "proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095", "node_multiaddress": "/ip4/127.0.0.1/tcp/5001", "connect_swarms_delay": "7s", "proxy_read_timeout": "10m0s", "proxy_read_header_timeout": "5s", "proxy_write_timeout": "10m0s", "proxy_idle_timeout": "1m0s" } }, "monitor": { "monbasic": { "check_interval": "15s" } }, "informer": { "disk": { "metric_ttl": "30s", "metric_type": "freespace" }, "numpin": { "metric_ttl": "10s" } } } ``` This new format aims to be easily extensible per component. As such, it already surfaces quite a few new options which were hardcoded before. Additionally, since Go API have changed, some redundant methods have been removed and small refactoring has happened to take advantage of the new way. License: MIT Signed-off-by: Hector Sanjuan <hector@protocol.ai>
2017-10-11 18:23:03 +00:00
"testing"
"time"
Dependency upgrades (#1755) * Update go-libp2p to v0.22.0 * Testing with go1.19 * build(deps): bump github.com/multiformats/go-multicodec Bumps [github.com/multiformats/go-multicodec](https://github.com/multiformats/go-multicodec) from 0.5.0 to 0.6.0. - [Release notes](https://github.com/multiformats/go-multicodec/releases) - [Commits](https://github.com/multiformats/go-multicodec/compare/v0.5.0...v0.6.0) --- updated-dependencies: - dependency-name: github.com/multiformats/go-multicodec dependency-type: direct:production update-type: version-update:semver-minor ... Signed-off-by: dependabot[bot] <support@github.com> * build(deps): bump github.com/ipld/go-car from 0.4.0 to 0.5.0 Bumps [github.com/ipld/go-car](https://github.com/ipld/go-car) from 0.4.0 to 0.5.0. - [Release notes](https://github.com/ipld/go-car/releases) - [Commits](https://github.com/ipld/go-car/compare/v0.4.0...v0.5.0) --- updated-dependencies: - dependency-name: github.com/ipld/go-car dependency-type: direct:production update-type: version-update:semver-minor ... Signed-off-by: dependabot[bot] <support@github.com> * build(deps): bump github.com/prometheus/client_golang Bumps [github.com/prometheus/client_golang](https://github.com/prometheus/client_golang) from 1.12.2 to 1.13.0. - [Release notes](https://github.com/prometheus/client_golang/releases) - [Changelog](https://github.com/prometheus/client_golang/blob/main/CHANGELOG.md) - [Commits](https://github.com/prometheus/client_golang/compare/v1.12.2...v1.13.0) --- updated-dependencies: - dependency-name: github.com/prometheus/client_golang dependency-type: direct:production update-type: version-update:semver-minor ... Signed-off-by: dependabot[bot] <support@github.com> * build(deps): bump github.com/hashicorp/go-hclog from 1.2.1 to 1.3.0 Bumps [github.com/hashicorp/go-hclog](https://github.com/hashicorp/go-hclog) from 1.2.1 to 1.3.0. - [Release notes](https://github.com/hashicorp/go-hclog/releases) - [Commits](https://github.com/hashicorp/go-hclog/compare/v1.2.1...v1.3.0) --- updated-dependencies: - dependency-name: github.com/hashicorp/go-hclog dependency-type: direct:production update-type: version-update:semver-minor ... Signed-off-by: dependabot[bot] <support@github.com> * build(deps): bump github.com/ipfs/go-ds-crdt from 0.3.6 to 0.3.7 Bumps [github.com/ipfs/go-ds-crdt](https://github.com/ipfs/go-ds-crdt) from 0.3.6 to 0.3.7. - [Release notes](https://github.com/ipfs/go-ds-crdt/releases) - [Commits](https://github.com/ipfs/go-ds-crdt/compare/v0.3.6...v0.3.7) --- updated-dependencies: - dependency-name: github.com/ipfs/go-ds-crdt dependency-type: direct:production update-type: version-update:semver-patch ... Signed-off-by: dependabot[bot] <support@github.com> * build(deps): bump github.com/urfave/cli/v2 from 2.10.2 to 2.14.1 Bumps [github.com/urfave/cli/v2](https://github.com/urfave/cli) from 2.10.2 to 2.14.1. - [Release notes](https://github.com/urfave/cli/releases) - [Changelog](https://github.com/urfave/cli/blob/main/docs/CHANGELOG.md) - [Commits](https://github.com/urfave/cli/compare/v2.10.2...v2.14.1) --- updated-dependencies: - dependency-name: github.com/urfave/cli/v2 dependency-type: direct:production update-type: version-update:semver-minor ... Signed-off-by: dependabot[bot] <support@github.com> * build(deps): bump github.com/libp2p/go-libp2p-http from 0.3.0 to 0.4.0 Bumps [github.com/libp2p/go-libp2p-http](https://github.com/libp2p/go-libp2p-http) from 0.3.0 to 0.4.0. - [Release notes](https://github.com/libp2p/go-libp2p-http/releases) - [Commits](https://github.com/libp2p/go-libp2p-http/compare/v0.3.0...v0.4.0) --- updated-dependencies: - dependency-name: github.com/libp2p/go-libp2p-http dependency-type: direct:production update-type: version-update:semver-minor ... Signed-off-by: dependabot[bot] <support@github.com> * build(deps): bump github.com/libp2p/go-libp2p-gorpc from 0.4.0 to 0.5.0 Bumps [github.com/libp2p/go-libp2p-gorpc](https://github.com/libp2p/go-libp2p-gorpc) from 0.4.0 to 0.5.0. - [Release notes](https://github.com/libp2p/go-libp2p-gorpc/releases) - [Commits](https://github.com/libp2p/go-libp2p-gorpc/compare/v0.4.0...v0.5.0) --- updated-dependencies: - dependency-name: github.com/libp2p/go-libp2p-gorpc dependency-type: direct:production update-type: version-update:semver-minor ... Signed-off-by: dependabot[bot] <support@github.com> * build(deps): bump contrib.go.opencensus.io/exporter/prometheus Bumps [contrib.go.opencensus.io/exporter/prometheus](https://github.com/census-ecosystem/opencensus-go-exporter-prometheus) from 0.4.1 to 0.4.2. - [Release notes](https://github.com/census-ecosystem/opencensus-go-exporter-prometheus/releases) - [Commits](https://github.com/census-ecosystem/opencensus-go-exporter-prometheus/compare/v0.4.1...v0.4.2) --- updated-dependencies: - dependency-name: contrib.go.opencensus.io/exporter/prometheus dependency-type: direct:production update-type: version-update:semver-patch ... Signed-off-by: dependabot[bot] <support@github.com> * build(deps): bump github.com/libp2p/go-libp2p-raft from 0.1.8 to 0.2.0 Bumps [github.com/libp2p/go-libp2p-raft](https://github.com/libp2p/go-libp2p-raft) from 0.1.8 to 0.2.0. - [Release notes](https://github.com/libp2p/go-libp2p-raft/releases) - [Commits](https://github.com/libp2p/go-libp2p-raft/compare/v0.1.8...v0.2.0) --- updated-dependencies: - dependency-name: github.com/libp2p/go-libp2p-raft dependency-type: direct:production update-type: version-update:semver-minor ... Signed-off-by: dependabot[bot] <support@github.com> * build(deps): bump github.com/urfave/cli from 1.22.9 to 1.22.10 Bumps [github.com/urfave/cli](https://github.com/urfave/cli) from 1.22.9 to 1.22.10. - [Release notes](https://github.com/urfave/cli/releases) - [Changelog](https://github.com/urfave/cli/blob/main/docs/CHANGELOG.md) - [Commits](https://github.com/urfave/cli/compare/v1.22.9...v1.22.10) --- updated-dependencies: - dependency-name: github.com/urfave/cli dependency-type: direct:production update-type: version-update:semver-patch ... Signed-off-by: dependabot[bot] <support@github.com> * Fix checker/linter/staticcheck warnings Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
2022-09-06 14:57:17 +00:00
"github.com/ipfs-cluster/ipfs-cluster/config"
Issue #162: Rework configuration format The following commit reimplements ipfs-cluster configuration under the following premises: * Each component is initialized with a configuration object defined by its module * Each component decides how the JSON representation of its configuration looks like * Each component parses and validates its own configuration * Each component exposes its own defaults * Component configurations are make the sections of a central JSON configuration file (which replaces the current JSON format) * Component configurations implement a common interface (config.ComponentConfig) with a set of common operations * The central configuration file is managed by a config.ConfigManager which: * Registers ComponentConfigs * Assigns the correspondent sections from the JSON file to each component and delegates the parsing * Delegates the JSON generation for each section * Can be notified when the configuration is updated and must be saved to disk The new service.json would then look as follows: ```json { "cluster": { "id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2", "private_key": "<...>", "secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786", "peers": [], "bootstrap": [], "leave_on_shutdown": false, "listen_multiaddress": "/ip4/0.0.0.0/tcp/9096", "state_sync_interval": "1m0s", "ipfs_sync_interval": "2m10s", "replication_factor": -1, "monitor_ping_interval": "15s" }, "consensus": { "raft": { "heartbeat_timeout": "1s", "election_timeout": "1s", "commit_timeout": "50ms", "max_append_entries": 64, "trailing_logs": 10240, "snapshot_interval": "2m0s", "snapshot_threshold": 8192, "leader_lease_timeout": "500ms" } }, "api": { "restapi": { "listen_multiaddress": "/ip4/127.0.0.1/tcp/9094", "read_timeout": "30s", "read_header_timeout": "5s", "write_timeout": "1m0s", "idle_timeout": "2m0s" } }, "ipfs_connector": { "ipfshttp": { "proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095", "node_multiaddress": "/ip4/127.0.0.1/tcp/5001", "connect_swarms_delay": "7s", "proxy_read_timeout": "10m0s", "proxy_read_header_timeout": "5s", "proxy_write_timeout": "10m0s", "proxy_idle_timeout": "1m0s" } }, "monitor": { "monbasic": { "check_interval": "15s" } }, "informer": { "disk": { "metric_ttl": "30s", "metric_type": "freespace" }, "numpin": { "metric_ttl": "10s" } } } ``` This new format aims to be easily extensible per component. As such, it already surfaces quite a few new options which were hardcoded before. Additionally, since Go API have changed, some redundant methods have been removed and small refactoring has happened to take advantage of the new way. License: MIT Signed-off-by: Hector Sanjuan <hector@protocol.ai>
2017-10-11 18:23:03 +00:00
)
var ccfgTestJSON = []byte(`
{
"peername": "testpeer",
Issue #162: Rework configuration format The following commit reimplements ipfs-cluster configuration under the following premises: * Each component is initialized with a configuration object defined by its module * Each component decides how the JSON representation of its configuration looks like * Each component parses and validates its own configuration * Each component exposes its own defaults * Component configurations are make the sections of a central JSON configuration file (which replaces the current JSON format) * Component configurations implement a common interface (config.ComponentConfig) with a set of common operations * The central configuration file is managed by a config.ConfigManager which: * Registers ComponentConfigs * Assigns the correspondent sections from the JSON file to each component and delegates the parsing * Delegates the JSON generation for each section * Can be notified when the configuration is updated and must be saved to disk The new service.json would then look as follows: ```json { "cluster": { "id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2", "private_key": "<...>", "secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786", "peers": [], "bootstrap": [], "leave_on_shutdown": false, "listen_multiaddress": "/ip4/0.0.0.0/tcp/9096", "state_sync_interval": "1m0s", "ipfs_sync_interval": "2m10s", "replication_factor": -1, "monitor_ping_interval": "15s" }, "consensus": { "raft": { "heartbeat_timeout": "1s", "election_timeout": "1s", "commit_timeout": "50ms", "max_append_entries": 64, "trailing_logs": 10240, "snapshot_interval": "2m0s", "snapshot_threshold": 8192, "leader_lease_timeout": "500ms" } }, "api": { "restapi": { "listen_multiaddress": "/ip4/127.0.0.1/tcp/9094", "read_timeout": "30s", "read_header_timeout": "5s", "write_timeout": "1m0s", "idle_timeout": "2m0s" } }, "ipfs_connector": { "ipfshttp": { "proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095", "node_multiaddress": "/ip4/127.0.0.1/tcp/5001", "connect_swarms_delay": "7s", "proxy_read_timeout": "10m0s", "proxy_read_header_timeout": "5s", "proxy_write_timeout": "10m0s", "proxy_idle_timeout": "1m0s" } }, "monitor": { "monbasic": { "check_interval": "15s" } }, "informer": { "disk": { "metric_ttl": "30s", "metric_type": "freespace" }, "numpin": { "metric_ttl": "10s" } } } ``` This new format aims to be easily extensible per component. As such, it already surfaces quite a few new options which were hardcoded before. Additionally, since Go API have changed, some redundant methods have been removed and small refactoring has happened to take advantage of the new way. License: MIT Signed-off-by: Hector Sanjuan <hector@protocol.ai>
2017-10-11 18:23:03 +00:00
"secret": "2588b80d5cb05374fa142aed6cbb047d1f4ef8ef15e37eba68c65b9d30df67ed",
"leave_on_shutdown": true,
"connection_manager": {
"high_water": 501,
"low_water": 500,
"grace_period": "100m0s"
},
"listen_multiaddress": [
2019-11-03 21:47:21 +00:00
"/ip4/127.0.0.1/tcp/10000",
"/ip4/127.0.0.1/udp/10000/quic"
],
Issue #162: Rework configuration format The following commit reimplements ipfs-cluster configuration under the following premises: * Each component is initialized with a configuration object defined by its module * Each component decides how the JSON representation of its configuration looks like * Each component parses and validates its own configuration * Each component exposes its own defaults * Component configurations are make the sections of a central JSON configuration file (which replaces the current JSON format) * Component configurations implement a common interface (config.ComponentConfig) with a set of common operations * The central configuration file is managed by a config.ConfigManager which: * Registers ComponentConfigs * Assigns the correspondent sections from the JSON file to each component and delegates the parsing * Delegates the JSON generation for each section * Can be notified when the configuration is updated and must be saved to disk The new service.json would then look as follows: ```json { "cluster": { "id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2", "private_key": "<...>", "secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786", "peers": [], "bootstrap": [], "leave_on_shutdown": false, "listen_multiaddress": "/ip4/0.0.0.0/tcp/9096", "state_sync_interval": "1m0s", "ipfs_sync_interval": "2m10s", "replication_factor": -1, "monitor_ping_interval": "15s" }, "consensus": { "raft": { "heartbeat_timeout": "1s", "election_timeout": "1s", "commit_timeout": "50ms", "max_append_entries": 64, "trailing_logs": 10240, "snapshot_interval": "2m0s", "snapshot_threshold": 8192, "leader_lease_timeout": "500ms" } }, "api": { "restapi": { "listen_multiaddress": "/ip4/127.0.0.1/tcp/9094", "read_timeout": "30s", "read_header_timeout": "5s", "write_timeout": "1m0s", "idle_timeout": "2m0s" } }, "ipfs_connector": { "ipfshttp": { "proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095", "node_multiaddress": "/ip4/127.0.0.1/tcp/5001", "connect_swarms_delay": "7s", "proxy_read_timeout": "10m0s", "proxy_read_header_timeout": "5s", "proxy_write_timeout": "10m0s", "proxy_idle_timeout": "1m0s" } }, "monitor": { "monbasic": { "check_interval": "15s" } }, "informer": { "disk": { "metric_ttl": "30s", "metric_type": "freespace" }, "numpin": { "metric_ttl": "10s" } } } ``` This new format aims to be easily extensible per component. As such, it already surfaces quite a few new options which were hardcoded before. Additionally, since Go API have changed, some redundant methods have been removed and small refactoring has happened to take advantage of the new way. License: MIT Signed-off-by: Hector Sanjuan <hector@protocol.ai>
2017-10-11 18:23:03 +00:00
"state_sync_interval": "1m0s",
"pin_recover_interval": "1m",
"replication_factor_min": 5,
"replication_factor_max": 5,
"monitor_ping_interval": "2s",
"pin_only_on_trusted_peers": true,
"disable_repinning": true,
"peer_addresses": [ "/ip4/127.0.0.1/tcp/1234/p2p/QmXZrtE5jQwXNqCJMfHUTQkvhQ4ZAnqMnmzFMJfLewuabc" ]
Issue #162: Rework configuration format The following commit reimplements ipfs-cluster configuration under the following premises: * Each component is initialized with a configuration object defined by its module * Each component decides how the JSON representation of its configuration looks like * Each component parses and validates its own configuration * Each component exposes its own defaults * Component configurations are make the sections of a central JSON configuration file (which replaces the current JSON format) * Component configurations implement a common interface (config.ComponentConfig) with a set of common operations * The central configuration file is managed by a config.ConfigManager which: * Registers ComponentConfigs * Assigns the correspondent sections from the JSON file to each component and delegates the parsing * Delegates the JSON generation for each section * Can be notified when the configuration is updated and must be saved to disk The new service.json would then look as follows: ```json { "cluster": { "id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2", "private_key": "<...>", "secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786", "peers": [], "bootstrap": [], "leave_on_shutdown": false, "listen_multiaddress": "/ip4/0.0.0.0/tcp/9096", "state_sync_interval": "1m0s", "ipfs_sync_interval": "2m10s", "replication_factor": -1, "monitor_ping_interval": "15s" }, "consensus": { "raft": { "heartbeat_timeout": "1s", "election_timeout": "1s", "commit_timeout": "50ms", "max_append_entries": 64, "trailing_logs": 10240, "snapshot_interval": "2m0s", "snapshot_threshold": 8192, "leader_lease_timeout": "500ms" } }, "api": { "restapi": { "listen_multiaddress": "/ip4/127.0.0.1/tcp/9094", "read_timeout": "30s", "read_header_timeout": "5s", "write_timeout": "1m0s", "idle_timeout": "2m0s" } }, "ipfs_connector": { "ipfshttp": { "proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095", "node_multiaddress": "/ip4/127.0.0.1/tcp/5001", "connect_swarms_delay": "7s", "proxy_read_timeout": "10m0s", "proxy_read_header_timeout": "5s", "proxy_write_timeout": "10m0s", "proxy_idle_timeout": "1m0s" } }, "monitor": { "monbasic": { "check_interval": "15s" } }, "informer": { "disk": { "metric_ttl": "30s", "metric_type": "freespace" }, "numpin": { "metric_ttl": "10s" } } } ``` This new format aims to be easily extensible per component. As such, it already surfaces quite a few new options which were hardcoded before. Additionally, since Go API have changed, some redundant methods have been removed and small refactoring has happened to take advantage of the new way. License: MIT Signed-off-by: Hector Sanjuan <hector@protocol.ai>
2017-10-11 18:23:03 +00:00
}
`)
func TestLoadJSON(t *testing.T) {
loadJSON := func(t *testing.T) *Config {
cfg := &Config{}
err := cfg.LoadJSON(ccfgTestJSON)
if err != nil {
t.Fatal(err)
}
return cfg
}
t.Run("basic", func(t *testing.T) {
cfg := &Config{}
err := cfg.LoadJSON(ccfgTestJSON)
if err != nil {
t.Fatal(err)
}
})
t.Run("peername", func(t *testing.T) {
cfg := loadJSON(t)
if cfg.Peername != "testpeer" {
t.Error("expected peername 'testpeer'")
}
})
t.Run("expected replication factor", func(t *testing.T) {
cfg := loadJSON(t)
if cfg.ReplicationFactorMin != 5 {
t.Error("expected replication factor min == 5")
}
})
t.Run("expected disable_repinning", func(t *testing.T) {
cfg := loadJSON(t)
if !cfg.DisableRepinning {
t.Error("expected disable_repinning to be true")
}
})
t.Run("expected pin_only_on_trusted_peers", func(t *testing.T) {
cfg := loadJSON(t)
if !cfg.PinOnlyOnTrustedPeers {
t.Error("expected pin_only_on_trusted_peers to be true")
}
})
t.Run("expected pin_recover_interval", func(t *testing.T) {
cfg := loadJSON(t)
if cfg.PinRecoverInterval != time.Minute {
t.Error("expected pin_recover_interval of 1m")
}
})
t.Run("expected connection_manager", func(t *testing.T) {
cfg := loadJSON(t)
if cfg.ConnMgr.LowWater != 500 {
t.Error("expected low_water to be 500")
}
if cfg.ConnMgr.HighWater != 501 {
t.Error("expected high_water to be 501")
}
if cfg.ConnMgr.GracePeriod != 100*time.Minute {
t.Error("expected grace_period to be 100m")
}
})
t.Run("expected peer addresses", func(t *testing.T) {
cfg := loadJSON(t)
if len(cfg.PeerAddresses) != 1 {
t.Error("expected 1 peer address")
}
})
loadJSON2 := func(t *testing.T, f func(j *configJSON)) (*Config, error) {
cfg := &Config{}
j := &configJSON{}
json.Unmarshal(ccfgTestJSON, j)
f(j)
tst, err := json.Marshal(j)
if err != nil {
return cfg, err
}
err = cfg.LoadJSON(tst)
if err != nil {
return cfg, err
}
return cfg, nil
}
t.Run("empty default peername", func(t *testing.T) {
cfg, err := loadJSON2(t, func(j *configJSON) { j.Peername = "" })
if err != nil {
t.Error(err)
}
if cfg.Peername == "" {
t.Error("expected default peername")
}
})
t.Run("bad listen multiaddress", func(t *testing.T) {
Dependency upgrades (#1755) * Update go-libp2p to v0.22.0 * Testing with go1.19 * build(deps): bump github.com/multiformats/go-multicodec Bumps [github.com/multiformats/go-multicodec](https://github.com/multiformats/go-multicodec) from 0.5.0 to 0.6.0. - [Release notes](https://github.com/multiformats/go-multicodec/releases) - [Commits](https://github.com/multiformats/go-multicodec/compare/v0.5.0...v0.6.0) --- updated-dependencies: - dependency-name: github.com/multiformats/go-multicodec dependency-type: direct:production update-type: version-update:semver-minor ... Signed-off-by: dependabot[bot] <support@github.com> * build(deps): bump github.com/ipld/go-car from 0.4.0 to 0.5.0 Bumps [github.com/ipld/go-car](https://github.com/ipld/go-car) from 0.4.0 to 0.5.0. - [Release notes](https://github.com/ipld/go-car/releases) - [Commits](https://github.com/ipld/go-car/compare/v0.4.0...v0.5.0) --- updated-dependencies: - dependency-name: github.com/ipld/go-car dependency-type: direct:production update-type: version-update:semver-minor ... Signed-off-by: dependabot[bot] <support@github.com> * build(deps): bump github.com/prometheus/client_golang Bumps [github.com/prometheus/client_golang](https://github.com/prometheus/client_golang) from 1.12.2 to 1.13.0. - [Release notes](https://github.com/prometheus/client_golang/releases) - [Changelog](https://github.com/prometheus/client_golang/blob/main/CHANGELOG.md) - [Commits](https://github.com/prometheus/client_golang/compare/v1.12.2...v1.13.0) --- updated-dependencies: - dependency-name: github.com/prometheus/client_golang dependency-type: direct:production update-type: version-update:semver-minor ... Signed-off-by: dependabot[bot] <support@github.com> * build(deps): bump github.com/hashicorp/go-hclog from 1.2.1 to 1.3.0 Bumps [github.com/hashicorp/go-hclog](https://github.com/hashicorp/go-hclog) from 1.2.1 to 1.3.0. - [Release notes](https://github.com/hashicorp/go-hclog/releases) - [Commits](https://github.com/hashicorp/go-hclog/compare/v1.2.1...v1.3.0) --- updated-dependencies: - dependency-name: github.com/hashicorp/go-hclog dependency-type: direct:production update-type: version-update:semver-minor ... Signed-off-by: dependabot[bot] <support@github.com> * build(deps): bump github.com/ipfs/go-ds-crdt from 0.3.6 to 0.3.7 Bumps [github.com/ipfs/go-ds-crdt](https://github.com/ipfs/go-ds-crdt) from 0.3.6 to 0.3.7. - [Release notes](https://github.com/ipfs/go-ds-crdt/releases) - [Commits](https://github.com/ipfs/go-ds-crdt/compare/v0.3.6...v0.3.7) --- updated-dependencies: - dependency-name: github.com/ipfs/go-ds-crdt dependency-type: direct:production update-type: version-update:semver-patch ... Signed-off-by: dependabot[bot] <support@github.com> * build(deps): bump github.com/urfave/cli/v2 from 2.10.2 to 2.14.1 Bumps [github.com/urfave/cli/v2](https://github.com/urfave/cli) from 2.10.2 to 2.14.1. - [Release notes](https://github.com/urfave/cli/releases) - [Changelog](https://github.com/urfave/cli/blob/main/docs/CHANGELOG.md) - [Commits](https://github.com/urfave/cli/compare/v2.10.2...v2.14.1) --- updated-dependencies: - dependency-name: github.com/urfave/cli/v2 dependency-type: direct:production update-type: version-update:semver-minor ... Signed-off-by: dependabot[bot] <support@github.com> * build(deps): bump github.com/libp2p/go-libp2p-http from 0.3.0 to 0.4.0 Bumps [github.com/libp2p/go-libp2p-http](https://github.com/libp2p/go-libp2p-http) from 0.3.0 to 0.4.0. - [Release notes](https://github.com/libp2p/go-libp2p-http/releases) - [Commits](https://github.com/libp2p/go-libp2p-http/compare/v0.3.0...v0.4.0) --- updated-dependencies: - dependency-name: github.com/libp2p/go-libp2p-http dependency-type: direct:production update-type: version-update:semver-minor ... Signed-off-by: dependabot[bot] <support@github.com> * build(deps): bump github.com/libp2p/go-libp2p-gorpc from 0.4.0 to 0.5.0 Bumps [github.com/libp2p/go-libp2p-gorpc](https://github.com/libp2p/go-libp2p-gorpc) from 0.4.0 to 0.5.0. - [Release notes](https://github.com/libp2p/go-libp2p-gorpc/releases) - [Commits](https://github.com/libp2p/go-libp2p-gorpc/compare/v0.4.0...v0.5.0) --- updated-dependencies: - dependency-name: github.com/libp2p/go-libp2p-gorpc dependency-type: direct:production update-type: version-update:semver-minor ... Signed-off-by: dependabot[bot] <support@github.com> * build(deps): bump contrib.go.opencensus.io/exporter/prometheus Bumps [contrib.go.opencensus.io/exporter/prometheus](https://github.com/census-ecosystem/opencensus-go-exporter-prometheus) from 0.4.1 to 0.4.2. - [Release notes](https://github.com/census-ecosystem/opencensus-go-exporter-prometheus/releases) - [Commits](https://github.com/census-ecosystem/opencensus-go-exporter-prometheus/compare/v0.4.1...v0.4.2) --- updated-dependencies: - dependency-name: contrib.go.opencensus.io/exporter/prometheus dependency-type: direct:production update-type: version-update:semver-patch ... Signed-off-by: dependabot[bot] <support@github.com> * build(deps): bump github.com/libp2p/go-libp2p-raft from 0.1.8 to 0.2.0 Bumps [github.com/libp2p/go-libp2p-raft](https://github.com/libp2p/go-libp2p-raft) from 0.1.8 to 0.2.0. - [Release notes](https://github.com/libp2p/go-libp2p-raft/releases) - [Commits](https://github.com/libp2p/go-libp2p-raft/compare/v0.1.8...v0.2.0) --- updated-dependencies: - dependency-name: github.com/libp2p/go-libp2p-raft dependency-type: direct:production update-type: version-update:semver-minor ... Signed-off-by: dependabot[bot] <support@github.com> * build(deps): bump github.com/urfave/cli from 1.22.9 to 1.22.10 Bumps [github.com/urfave/cli](https://github.com/urfave/cli) from 1.22.9 to 1.22.10. - [Release notes](https://github.com/urfave/cli/releases) - [Changelog](https://github.com/urfave/cli/blob/main/docs/CHANGELOG.md) - [Commits](https://github.com/urfave/cli/compare/v1.22.9...v1.22.10) --- updated-dependencies: - dependency-name: github.com/urfave/cli dependency-type: direct:production update-type: version-update:semver-patch ... Signed-off-by: dependabot[bot] <support@github.com> * Fix checker/linter/staticcheck warnings Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
2022-09-06 14:57:17 +00:00
_, err := loadJSON2(t, func(j *configJSON) { j.ListenMultiaddress = config.Strings{"abc"} })
if err == nil {
t.Error("expected error parsing listen_multiaddress")
}
})
t.Run("bad secret", func(t *testing.T) {
_, err := loadJSON2(t, func(j *configJSON) { j.Secret = "abc" })
if err == nil {
t.Error("expected error decoding secret")
}
})
t.Run("default replication factors", func(t *testing.T) {
cfg, err := loadJSON2(
t,
func(j *configJSON) {
j.ReplicationFactorMin = 0
j.ReplicationFactorMax = 0
},
)
if err != nil {
t.Error(err)
}
if cfg.ReplicationFactorMin != -1 || cfg.ReplicationFactorMax != -1 {
t.Error("expected default replication factor")
}
})
t.Run("only replication factor min set to -1", func(t *testing.T) {
_, err := loadJSON2(t, func(j *configJSON) { j.ReplicationFactorMin = -1 })
if err == nil {
t.Error("expected error when only one replication factor is -1")
}
})
t.Run("replication factor min > max", func(t *testing.T) {
_, err := loadJSON2(
t,
func(j *configJSON) {
j.ReplicationFactorMin = 5
j.ReplicationFactorMax = 4
},
)
if err == nil {
t.Error("expected error when only rplMin > rplMax")
}
})
t.Run("default replication factor", func(t *testing.T) {
cfg, err := loadJSON2(
t,
func(j *configJSON) {
j.ReplicationFactorMin = 0
j.ReplicationFactorMax = 0
},
)
if err != nil {
t.Error(err)
}
if cfg.ReplicationFactorMin != -1 || cfg.ReplicationFactorMax != -1 {
t.Error("expected default replication factors")
}
})
t.Run("conn manager default", func(t *testing.T) {
cfg, err := loadJSON2(
t,
func(j *configJSON) {
j.ConnectionManager = nil
},
)
if err != nil {
t.Fatal(err)
}
if cfg.ConnMgr.LowWater != DefaultConnMgrLowWater {
t.Error("default conn manager values not set")
}
})
Issue #162: Rework configuration format The following commit reimplements ipfs-cluster configuration under the following premises: * Each component is initialized with a configuration object defined by its module * Each component decides how the JSON representation of its configuration looks like * Each component parses and validates its own configuration * Each component exposes its own defaults * Component configurations are make the sections of a central JSON configuration file (which replaces the current JSON format) * Component configurations implement a common interface (config.ComponentConfig) with a set of common operations * The central configuration file is managed by a config.ConfigManager which: * Registers ComponentConfigs * Assigns the correspondent sections from the JSON file to each component and delegates the parsing * Delegates the JSON generation for each section * Can be notified when the configuration is updated and must be saved to disk The new service.json would then look as follows: ```json { "cluster": { "id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2", "private_key": "<...>", "secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786", "peers": [], "bootstrap": [], "leave_on_shutdown": false, "listen_multiaddress": "/ip4/0.0.0.0/tcp/9096", "state_sync_interval": "1m0s", "ipfs_sync_interval": "2m10s", "replication_factor": -1, "monitor_ping_interval": "15s" }, "consensus": { "raft": { "heartbeat_timeout": "1s", "election_timeout": "1s", "commit_timeout": "50ms", "max_append_entries": 64, "trailing_logs": 10240, "snapshot_interval": "2m0s", "snapshot_threshold": 8192, "leader_lease_timeout": "500ms" } }, "api": { "restapi": { "listen_multiaddress": "/ip4/127.0.0.1/tcp/9094", "read_timeout": "30s", "read_header_timeout": "5s", "write_timeout": "1m0s", "idle_timeout": "2m0s" } }, "ipfs_connector": { "ipfshttp": { "proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095", "node_multiaddress": "/ip4/127.0.0.1/tcp/5001", "connect_swarms_delay": "7s", "proxy_read_timeout": "10m0s", "proxy_read_header_timeout": "5s", "proxy_write_timeout": "10m0s", "proxy_idle_timeout": "1m0s" } }, "monitor": { "monbasic": { "check_interval": "15s" } }, "informer": { "disk": { "metric_ttl": "30s", "metric_type": "freespace" }, "numpin": { "metric_ttl": "10s" } } } ``` This new format aims to be easily extensible per component. As such, it already surfaces quite a few new options which were hardcoded before. Additionally, since Go API have changed, some redundant methods have been removed and small refactoring has happened to take advantage of the new way. License: MIT Signed-off-by: Hector Sanjuan <hector@protocol.ai>
2017-10-11 18:23:03 +00:00
}
func TestToJSON(t *testing.T) {
cfg := &Config{}
err := cfg.LoadJSON(ccfgTestJSON)
if err != nil {
t.Fatal(err)
}
newjson, err := cfg.ToJSON()
if err != nil {
t.Fatal(err)
}
cfg = &Config{}
err = cfg.LoadJSON(newjson)
Issue #162: Rework configuration format The following commit reimplements ipfs-cluster configuration under the following premises: * Each component is initialized with a configuration object defined by its module * Each component decides how the JSON representation of its configuration looks like * Each component parses and validates its own configuration * Each component exposes its own defaults * Component configurations are make the sections of a central JSON configuration file (which replaces the current JSON format) * Component configurations implement a common interface (config.ComponentConfig) with a set of common operations * The central configuration file is managed by a config.ConfigManager which: * Registers ComponentConfigs * Assigns the correspondent sections from the JSON file to each component and delegates the parsing * Delegates the JSON generation for each section * Can be notified when the configuration is updated and must be saved to disk The new service.json would then look as follows: ```json { "cluster": { "id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2", "private_key": "<...>", "secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786", "peers": [], "bootstrap": [], "leave_on_shutdown": false, "listen_multiaddress": "/ip4/0.0.0.0/tcp/9096", "state_sync_interval": "1m0s", "ipfs_sync_interval": "2m10s", "replication_factor": -1, "monitor_ping_interval": "15s" }, "consensus": { "raft": { "heartbeat_timeout": "1s", "election_timeout": "1s", "commit_timeout": "50ms", "max_append_entries": 64, "trailing_logs": 10240, "snapshot_interval": "2m0s", "snapshot_threshold": 8192, "leader_lease_timeout": "500ms" } }, "api": { "restapi": { "listen_multiaddress": "/ip4/127.0.0.1/tcp/9094", "read_timeout": "30s", "read_header_timeout": "5s", "write_timeout": "1m0s", "idle_timeout": "2m0s" } }, "ipfs_connector": { "ipfshttp": { "proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095", "node_multiaddress": "/ip4/127.0.0.1/tcp/5001", "connect_swarms_delay": "7s", "proxy_read_timeout": "10m0s", "proxy_read_header_timeout": "5s", "proxy_write_timeout": "10m0s", "proxy_idle_timeout": "1m0s" } }, "monitor": { "monbasic": { "check_interval": "15s" } }, "informer": { "disk": { "metric_ttl": "30s", "metric_type": "freespace" }, "numpin": { "metric_ttl": "10s" } } } ``` This new format aims to be easily extensible per component. As such, it already surfaces quite a few new options which were hardcoded before. Additionally, since Go API have changed, some redundant methods have been removed and small refactoring has happened to take advantage of the new way. License: MIT Signed-off-by: Hector Sanjuan <hector@protocol.ai>
2017-10-11 18:23:03 +00:00
if err != nil {
t.Fatal(err)
}
}
func TestDefault(t *testing.T) {
cfg := &Config{}
cfg.Default()
if err := cfg.Validate(); err != nil {
t.Fatal(err)
}
}
func TestApplyEnvVars(t *testing.T) {
os.Setenv("CLUSTER_PEERNAME", "envsetpeername")
cfg := &Config{}
cfg.Default()
cfg.ApplyEnvVars()
if cfg.Peername != "envsetpeername" {
t.Fatal("failed to override peername with env var")
}
}
Issue #162: Rework configuration format The following commit reimplements ipfs-cluster configuration under the following premises: * Each component is initialized with a configuration object defined by its module * Each component decides how the JSON representation of its configuration looks like * Each component parses and validates its own configuration * Each component exposes its own defaults * Component configurations are make the sections of a central JSON configuration file (which replaces the current JSON format) * Component configurations implement a common interface (config.ComponentConfig) with a set of common operations * The central configuration file is managed by a config.ConfigManager which: * Registers ComponentConfigs * Assigns the correspondent sections from the JSON file to each component and delegates the parsing * Delegates the JSON generation for each section * Can be notified when the configuration is updated and must be saved to disk The new service.json would then look as follows: ```json { "cluster": { "id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2", "private_key": "<...>", "secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786", "peers": [], "bootstrap": [], "leave_on_shutdown": false, "listen_multiaddress": "/ip4/0.0.0.0/tcp/9096", "state_sync_interval": "1m0s", "ipfs_sync_interval": "2m10s", "replication_factor": -1, "monitor_ping_interval": "15s" }, "consensus": { "raft": { "heartbeat_timeout": "1s", "election_timeout": "1s", "commit_timeout": "50ms", "max_append_entries": 64, "trailing_logs": 10240, "snapshot_interval": "2m0s", "snapshot_threshold": 8192, "leader_lease_timeout": "500ms" } }, "api": { "restapi": { "listen_multiaddress": "/ip4/127.0.0.1/tcp/9094", "read_timeout": "30s", "read_header_timeout": "5s", "write_timeout": "1m0s", "idle_timeout": "2m0s" } }, "ipfs_connector": { "ipfshttp": { "proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095", "node_multiaddress": "/ip4/127.0.0.1/tcp/5001", "connect_swarms_delay": "7s", "proxy_read_timeout": "10m0s", "proxy_read_header_timeout": "5s", "proxy_write_timeout": "10m0s", "proxy_idle_timeout": "1m0s" } }, "monitor": { "monbasic": { "check_interval": "15s" } }, "informer": { "disk": { "metric_ttl": "30s", "metric_type": "freespace" }, "numpin": { "metric_ttl": "10s" } } } ``` This new format aims to be easily extensible per component. As such, it already surfaces quite a few new options which were hardcoded before. Additionally, since Go API have changed, some redundant methods have been removed and small refactoring has happened to take advantage of the new way. License: MIT Signed-off-by: Hector Sanjuan <hector@protocol.ai>
2017-10-11 18:23:03 +00:00
func TestValidate(t *testing.T) {
cfg := &Config{}
cfg.Default()
cfg.MonitorPingInterval = 0
if cfg.Validate() == nil {
Issue #162: Rework configuration format The following commit reimplements ipfs-cluster configuration under the following premises: * Each component is initialized with a configuration object defined by its module * Each component decides how the JSON representation of its configuration looks like * Each component parses and validates its own configuration * Each component exposes its own defaults * Component configurations are make the sections of a central JSON configuration file (which replaces the current JSON format) * Component configurations implement a common interface (config.ComponentConfig) with a set of common operations * The central configuration file is managed by a config.ConfigManager which: * Registers ComponentConfigs * Assigns the correspondent sections from the JSON file to each component and delegates the parsing * Delegates the JSON generation for each section * Can be notified when the configuration is updated and must be saved to disk The new service.json would then look as follows: ```json { "cluster": { "id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2", "private_key": "<...>", "secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786", "peers": [], "bootstrap": [], "leave_on_shutdown": false, "listen_multiaddress": "/ip4/0.0.0.0/tcp/9096", "state_sync_interval": "1m0s", "ipfs_sync_interval": "2m10s", "replication_factor": -1, "monitor_ping_interval": "15s" }, "consensus": { "raft": { "heartbeat_timeout": "1s", "election_timeout": "1s", "commit_timeout": "50ms", "max_append_entries": 64, "trailing_logs": 10240, "snapshot_interval": "2m0s", "snapshot_threshold": 8192, "leader_lease_timeout": "500ms" } }, "api": { "restapi": { "listen_multiaddress": "/ip4/127.0.0.1/tcp/9094", "read_timeout": "30s", "read_header_timeout": "5s", "write_timeout": "1m0s", "idle_timeout": "2m0s" } }, "ipfs_connector": { "ipfshttp": { "proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095", "node_multiaddress": "/ip4/127.0.0.1/tcp/5001", "connect_swarms_delay": "7s", "proxy_read_timeout": "10m0s", "proxy_read_header_timeout": "5s", "proxy_write_timeout": "10m0s", "proxy_idle_timeout": "1m0s" } }, "monitor": { "monbasic": { "check_interval": "15s" } }, "informer": { "disk": { "metric_ttl": "30s", "metric_type": "freespace" }, "numpin": { "metric_ttl": "10s" } } } ``` This new format aims to be easily extensible per component. As such, it already surfaces quite a few new options which were hardcoded before. Additionally, since Go API have changed, some redundant methods have been removed and small refactoring has happened to take advantage of the new way. License: MIT Signed-off-by: Hector Sanjuan <hector@protocol.ai>
2017-10-11 18:23:03 +00:00
t.Fatal("expected error validating")
}
cfg.Default()
cfg.ReplicationFactorMin = 10
cfg.ReplicationFactorMax = 5
if cfg.Validate() == nil {
t.Fatal("expected error validating")
}
cfg.Default()
cfg.ReplicationFactorMin = 0
if cfg.Validate() == nil {
t.Fatal("expected error validating")
}
cfg.Default()
cfg.ConnMgr.GracePeriod = 0
if cfg.Validate() == nil {
t.Fatal("expected error validating")
}
cfg.Default()
cfg.PinRecoverInterval = 0
if cfg.Validate() == nil {
t.Fatal("expected error validating")
}
Issue #162: Rework configuration format The following commit reimplements ipfs-cluster configuration under the following premises: * Each component is initialized with a configuration object defined by its module * Each component decides how the JSON representation of its configuration looks like * Each component parses and validates its own configuration * Each component exposes its own defaults * Component configurations are make the sections of a central JSON configuration file (which replaces the current JSON format) * Component configurations implement a common interface (config.ComponentConfig) with a set of common operations * The central configuration file is managed by a config.ConfigManager which: * Registers ComponentConfigs * Assigns the correspondent sections from the JSON file to each component and delegates the parsing * Delegates the JSON generation for each section * Can be notified when the configuration is updated and must be saved to disk The new service.json would then look as follows: ```json { "cluster": { "id": "QmTVW8NoRxC5wBhV7WtAYtRn7itipEESfozWN5KmXUQnk2", "private_key": "<...>", "secret": "00224102ae6aaf94f2606abf69a0e278251ecc1d64815b617ff19d6d2841f786", "peers": [], "bootstrap": [], "leave_on_shutdown": false, "listen_multiaddress": "/ip4/0.0.0.0/tcp/9096", "state_sync_interval": "1m0s", "ipfs_sync_interval": "2m10s", "replication_factor": -1, "monitor_ping_interval": "15s" }, "consensus": { "raft": { "heartbeat_timeout": "1s", "election_timeout": "1s", "commit_timeout": "50ms", "max_append_entries": 64, "trailing_logs": 10240, "snapshot_interval": "2m0s", "snapshot_threshold": 8192, "leader_lease_timeout": "500ms" } }, "api": { "restapi": { "listen_multiaddress": "/ip4/127.0.0.1/tcp/9094", "read_timeout": "30s", "read_header_timeout": "5s", "write_timeout": "1m0s", "idle_timeout": "2m0s" } }, "ipfs_connector": { "ipfshttp": { "proxy_listen_multiaddress": "/ip4/127.0.0.1/tcp/9095", "node_multiaddress": "/ip4/127.0.0.1/tcp/5001", "connect_swarms_delay": "7s", "proxy_read_timeout": "10m0s", "proxy_read_header_timeout": "5s", "proxy_write_timeout": "10m0s", "proxy_idle_timeout": "1m0s" } }, "monitor": { "monbasic": { "check_interval": "15s" } }, "informer": { "disk": { "metric_ttl": "30s", "metric_type": "freespace" }, "numpin": { "metric_ttl": "10s" } } } ``` This new format aims to be easily extensible per component. As such, it already surfaces quite a few new options which were hardcoded before. Additionally, since Go API have changed, some redundant methods have been removed and small refactoring has happened to take advantage of the new way. License: MIT Signed-off-by: Hector Sanjuan <hector@protocol.ai>
2017-10-11 18:23:03 +00:00
}